Owners manual

Owner's Manual 13
ENGLISH
Operating Instructions
Rapid Ventilation/Power Saving Ventilation
Filter Time
Lo
Hi
SHi
Delay Time
Auto Normal
Heater Preheat
Defrost
Humidify
Z O N E
1 2 3 4
Linked Run
Central Run
PLASMA
Timer
Program set Sun Mon Tue Wed Thu Fri Sat
On Off
Set no. Timer
Dual Remote
TIME RESET
Heat XCH Fan Speed
Auto
EXTERNAL VENTILATOR OPERATION SUB FUNCTION
e-SAVER
fresh
Timer Cancel
Program Week
Hour Min
Holiday
Set/Clr
fresh
Auto
Cover open status
fresh
Plasma
Rapid Ventilation
Press the [Rapid Ventilation] button.
• Operation for preventing the polluted
indoor air or moisture from extending
to other rooms.
- Supply Air fan : Low.
- Exhaust fan : Super High
• [Rapid] is indicated on the remote controller and the
air volume is indicated 'Auto'.
❈ It is better to use Rapid Ventilation function when
the indoor pollution degree is high.
• Inflow prevention operation means function to
improve pleasantness by preventing inflow of
outdoor smell or moisture by more increasing Supply
Air volume than Exhaust air volume.
- Supply air fan : Super high
- Exhaust fan : Low
For more information, contact the professional
installation agent.
Power Saving Ventilation
Press the [e-Saver] button.
• Operation to achieve saving of power
by searching for the best efficient
operation point.
• Promote discharge of CO2 by increased
exhaust air volume than supply air volume.
• [e-Saver] is indicated on the remote controller and
the air volume indicates 'Auto'.