Safety Precautions Please read these safety precautions carefully before using the product. Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur.
Safety Precautions Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The product can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Safety Precautions Caution Do not shock the product when moving it. - You may be electrocuted or the product can be damaged. Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair. Precautions in Using the Product Warning Do not disassemble, repair or modify the product at your own discretion.
Before Connecting to the PC Connecting the stand Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. 1. Place the monitor with its front facing downward on a soft cloth. 2. Connect the Stand Base to the Stand Body and press latches at the button toward each end. 3. Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click". 4. Once assembled take the monitor up carefully and face the front side 2.
Before Connecting to the PC Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~15˚ Swivel :320˚ Warning: When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).
Name and Function of the Parts Name of the Remote Control Buttons (Atype) MUTE POWER MUTE POWER TV : TV button INPUT Input TV INPUT I/II LIST Q.VIEW MENU Each time you press the Input button it will change to TV AV1 AV2 RGB If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Name and Function of the Parts MUTE TV LIST POWER INPUT Q.VIEW LIST : Programme list To display the programme list (0~ 99). Programme List I/II 0 1 2 3 4 MENU C C C C C 01 35 05 11 04 5 6 7 8 9 C C C C C 07 50 51 41 63 OK MENU Note: TV channels displayed in blue have been setup to be skipped in the Programme Edit menu. PR Q.VIEW : QUICK VIEW Button OK To display the previously selected TV channel VOL VOL PR MENU Use this button to enter the On Screen Display menu.
Name and Function of the Parts Remote Control - Using the Teletext function Please select your local teletext language. (page A28) If you don't, the teletext may not appear correctly on the screen. LIST Q.VIEW MENU TEXT To select the teletext on or off. The main index page or the last selected page appears on the screen together with an information headline and an option line at the bottom of the screen. PR OK VOL VOL TIME Press this button to select a sub page number.
Name and Function of the Parts Remote Control - Using the Teletext function UPDATE SSM PSM SLEEP TEXT UPDATE TIME Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode. Before interrupting teletext, you may select a page number. When the page has been found, the information line appears briefly on your screen. Press the button again to reappear teletext.
Name and Function of the Parts Name of the Remote Control Buttons (Btype) POWER TV MUTE PSM TV : TV button POWER INPUT INPUT SSM Input I/II Each time you press the Input button it will change to TV AV1 AV2 RGB If nothing is inputted for several seconds the screen will automatically move to the selected menu. TV AV1 AV2 RGB OK LIST MUTE Q.VIEW Switches the sound on or off.
Name and Function of the Parts Name of the Remote Control Buttons POWER TV I/II : Bilingual choice and sound mode selection INPUT [TV] MUTE PSM SSM To switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono, in case of digital transmission. to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in case of Nicam Dual transmission.
Name and Function of the Parts Name of the Remote Control Buttons LIST Q.VIEW PR ( ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. OK Button Use when functional adjustment is completed. PR OK VOL VOL PR SLEEP MENU HOLD REVEAL ARC/ * MIX SIZE ? INDEX i MODE MENU Use this button to enter the On Screen Display menu. SLEEP : SLEEP Timer You can set a time period after which the TV / AV / RGB should switch itself to standby.
Name and Function of the Parts Remote Control - Using the Teletext function Please select your local teletext language. (page 28) If you don't, the teletext may not appear correctly on the screen. Yellow key Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel. PR OK VOL VOL HOLD Press the button to stop the automatically rotating of the sub pages. Press the button again to continue the automatic rotating again.
Name and Function of the Parts Remote Control - Using the Teletext function PR REVEAL OK VOL Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display. VOL PR SLEEP MENU ARC/ * TEXT INDEX To display the main index. HOLD REVEAL MIX SIZE ? INDEX i MODE TIME M UPDATE MODE X The mode will be switched in the Teletext mode. UPDATE Press the button to appear the TV programme.
Name and Function of the Parts Rear View ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 Power Connector : Connect the power cord. SCART Input/Output Terminal AV Input Terminal D-Sub Analog Signal Connector RGB Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack. TV Tuner Jack : Connect the antenna.
Name and Function of the Parts AV Input Terminal (RGB) IN AUDIO VIDEO L R (Mono) S-VIDEO AV IN 2 Video Input Terminal Audio Input Terminal S-Video Input Terminal 16
Connecting to External Devices Connecting to your PC 1. First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 Connecting with the D-Sub signal input cable. RGB (PC/DTV) IN Rear side of the product.
Connecting to External Devices 3. Connect the power cord. Rear side of the product. ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 4. 1 Turn on power by pressing the power button on the product. INPUT MENU OK VOL PR Power button 2 Turn on the PC. 5. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the top side of the product.
Connecting to External Devices Connecting to VCR/DVD 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 18). A When using the RCA cable. B When using the S-Video cable. • Connect to the S-Video input terminal to • Connect the input terminal with a watch high image quality movies. proper colour match.
Connecting to External Devices C When using the SCART cable. Rear side of the Product AV1 SCART Cable Please, use shielded scart cable. (Not Included) VCR / DVD 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the topside of the product. INPUT OK A When connecting with a RCA cable. • Select AV2 B When connecting with a S-Video cable. C When connecting with a SCART cable.
Connecting to External Devices Connecting to DVD/SET-TOP BOX 1. Connect the D-sub cable, RCA/PC cable as shown in the below figure and then connect the power cord. (see page 18) [Rear side of the Product] AUDIO (RGB) IN RGB PC/DTV IN RCA-Stereo cable (not included) D-Sub cable [Set-top Box/DVD] 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the topside of the product.
Connecting to External Devices When Watching TV 1. Check if the antenna cable is connected at the rear side of the product and then, connect the power cord. Rear Side of the Product ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 ANTENNA IN Antenna Cable (Not included.) 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the top side of the product.
To arrange cables using cable management 1. Arrange the cables in the center as shown in the following picture. 2. Fit the cable management to the Holder Groove downwards. cable management Hold the cable management and lift up slightly to remove it. Warning • Do not use the cable management as a handle for the Monitor. • Do not press the cable management.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit ANTENNA IN RGB (PC/DTV) IN AUDIO (RGB) IN AV1 AUDIO VIDEO L R (Mono) S-VIDEO H/P AV IN 2 INPUT MENU OK Power Indicator Power Button MENU Button OSD Select/Adjust Button VOL PR • This Indicator lights up green when the display operates normally (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator colour changes to red. • Use this button to turn the product on and off.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit OK Button INPUT Button • OK button is usually used in choosing the MENU. When there is no MENU on the screen pushing the OK button will give the information about the current input source.
Adjusting the Screen OSD (On Screen Display) Menu Icon Function Description Set/Select the channel when using the TV Station Adjusting the picture function. Picture Adjusting the sound function. Sound Adjusting the time function. Time Selecting the special function. Special Adjusting the screen function. Screen Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
Adjusting the Screen OSD (On Screen Display) Screen Tracking Order A type PR MENU PR OK PR Pop up the menu screen MENU OK OK OK PR Move where you want to adjust Select a menu icon Adjust the status Save adjustment Exit from the menu screen. • Use the remote control to adjust the OSD screen.
Adjusting the Screen On-Screen Menu Language / Country Selection Installation guide menu appears on product screen when it is turned on for the first time. Installation guide Language Chesky Dansk Deutsch English Español Français Italiano Magyar Nederlands Norsk Polski Português –”——K»… Romaneste suomi Svenska OK MENU 1. Press the button and then, OK button to select your desired language. 2. Press the button and then, OK button to select your country.
Adjusting the Screen STATION ID set/Select the channel when using the TV Auto programme Station Auto programme Manual programme Programme edit Favourite programme To set OK MENU System It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.
Adjusting the Screen STATION ID set/Select the channel when using the TV Press the buttons to select VHF/UHF for aerial channels or Cable for cable channels. To select the channel reception type. : VHF/UHF / Cable. Band Channel If you know the channel number, enter it directly with the digit buttons 0 to 9. Fine In case of poor reception, you can improve the reception by fine tuning. Use the buttons to fine tune for the best picture and sound. Search Use the Name To see the assigned channel name.
Adjusting the Screen STATION ID set/Select the channel when using the TV Favourite programme Station Auto programme Manual programme Programme edit Favourite programme Off __ __ __ __ __ __ __ __ _____ _____ _____ _____ _____ _____ _____ _____ OK MENU This function lets you select your favourite programmes directly. (8 channel) Press the buttons to select a channel.
Adjusting the Screen PICTURE ID adjust the picture function (RGB-PC) PSM < Picture PSM CSM Reset Dynamic Standard Mild Game User OK MENU The PSM function automatically adjusts the screen image quality. (It is not working in PC input.) • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game.
Adjusting the Screen PICTURE ID adjust the picture function (TV/Video/RGB-DTV) PSM < Picture PSM CSM Reset Dynamic Standard Mild Game User OK MENU CSM Picture < PSM CSM Reset Cool Normal Warm User The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image.
Adjusting the Screen SOUND ID to adjust the sound function SSM AVL Balance < Sound 0 Flat Music Movie Sports User OK MENU SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio. • Music : Select this option to enjoy the original sound when listening to the music. • Movie : Select this option to enjoy sublime sound. • Sports : Select this option to watch sports broadcasting.
Adjusting the Screen TIME ID to adjust the time function Time Clock Off time On time Auto sleep -- : -- OK MENU Clock This function is used to set up of current time. You must set the time correctly before using On/Off time function. 1) Press the MENU button and then use button to select the Time menu. 2) Press the button and then use button to select the Clock menu. button and then use button to set the hour(00~23). 3) Press 4) Press button and then use button to set the minutes(00~59).
Adjusting the Screen SPECIAL ID to Select the special function Special Language Country Child lock DDC-CI OK MENU Language To choose the language in which the control names are displayed. Country Please select your local teletext language. If you don't, the teletext may not appear correctly on the screen. This feature is not available in all countries. Child lock Use the buttons to select On or Off. It can be set up so that it can only be used with the remote control.
Adjusting the Screen SCREEN ID to adjust the screen function Screen Auto config. Manual config. Reset To set OK MENU Auto config. This button is for the automatic adjustment of the screen Position, Clock and Phase. (It is not working in RGB) Manual config. This button is for the manual adjustment of the screen Position, Clock and Phase. • H-Position To move the displayed image left or right. • V-Position To move the displayed image up or down. • Clock (It is working in RGB mode.
Troubleshooting No image is displayed ● Is the product's power cord connected? • Check if the power cord is properly connected to the outlet. ● Is the power indicator turning on? • See if the power switch is turned on. ● Power is on, power indicator is green but the screen appears extremely dark. • Adjust brightness and contrast again. ● Does the power indicator look red? • If the product is in power saving mode, move the mouse or press any key.
Troubleshooting The screen image looks abnormal. ● Is the screen position wrong? • Adjust the Position menu in OSD . • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. ● Do thin lines appear on the background screen? • Adjust the Clock menu in OSD. ● Horizontal noise appears or the characters look blurred. • Adjust the Phase menu in OSD.
Troubleshooting The audio function does not work. ● No sound? • Check if the audio cable is connected properly. • Adjust the volume. • Check if the sound is set properly. ● Sound is too low. • Adjust the volume. The TV function does not work. ● The TV signal is not being received. • See if you have selected the proper channel mode. • Use the automatic channel setup function. • Check if the TV antenna is properly connected. Screen colour is abnormal. ● Screen has poor colour resolution (16 colours).
Specifications The product specifications can change without prior notice for product improvement. [17 inch] LCD Panel Video Signal Screen Type Pixel Pitch 17 inches (43.27 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 43.27 cm 0.264 mm Max.
Specifications The product specifications can change without prior notice for product improvement. [19 inch] LCD Panel Video Signal Screen Type Pixel Pitch 19 inches (48.19 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 48.19 cm 0.294 mm Max.
Specifications PC Mode – Preset Mode [17 inch] [19 inch] Preset mode 1 2 3 4 5 6 7 VGA VGA VGA VESA VESA VESA MAC 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.469 31.468 31.469 37.500 37.879 46.875 49.
Specifications VESA wall mounting This product meets VESA-compliant mounting interface pad specifications. 1. Put the product on a piece of cloth or other soft surface with the front side facing downward. 2. Pullout the stand as shown in the picture. 3. Fasten the screw on the backside of the product and the other one in the joint of the stand. 4. Install the VESA standard wall mounting. VESA wall mounting Connected to another object (stand type and wallmounted type).