ENGLISH OWNER’S MANUAL MONITOR TV Please read this manual carefully before operating your set and retain it for future reference. MONITOR TV MODELS M227WA M237WA www.lge.
PREPARATION FRONT PANEL CONTROLS ■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set.
PREPARATION BACK PANEL INFORMATION AV 1 ■ This is a simplified representation of the back panel. The image shown may be somewhat different from your set.
PREPARATION STAND INSTALLATION ■ The image shown may be somewhat different from your set. 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the s t a n d b a s e into the product 3 Attach the monitor to the Stand Base by turning the screw to the right.
PREPARATION STAND INSTALLATION ■ The image shown may be somewhat different from your set. 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Insert the s t a n d b a s e into the product 3 Attach the monitor to the Stand Base by turning the screw to the right.
PREPARATION DETACHING STAND ■ The image shown may be somewhat different from your set. 1 Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. 3 Turn the screw by using the screw handle 4 Pull the stand base.
PREPARATION DETACHING STAND ■ The image shown may be somewhat different from your set. 1 Place the set screen side down on a cushion or soft cloth. 2 Detach the monitor to the Stand Base by turning the screw to the left. 3 Turn the screw by using the screw handle 4 Pull the stand base.
PREPARATION WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm 10 cm DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
PREPARATION POSITIONING YOUR DISPLAY ■ The image shown may be somewhat different from your set. Adjust the position of the panel in various ways for maximum comfort. • Tilt range -6° to -2° 12° to 18° LOCATION Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in a position to allow a free flow of air.
PREPARATION KENSINGTON SECURITY SYSTEM - The product is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m, the internet homepage of the Kensington company.
EXTERNAL EQUIPMENT SETUP ■ To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ The image shown may be somewhat different from your set. HD RECEIVER SETUP When connecting with a component cable 1 Connect the SET-TOP outputs to the C O M P O N E N T I N V I D E O sockets (Y PB PR) on the set. 2 Connect the audio cable from the SET-TOP to C O M P O N E N T I N A U D I O sockets of the set.
EXTERNAL EQUIPMENT SETUP When connecting with a HDMI 1 Connect the HDMI output of the digital set-top box to the H D M I I N jack on the set. 1 2 HDMI IN 2 Press the INPUT button to select HDMI1 or HDMI2. Signal HDMI 480i/576i No 480p/576p Yes 720p/1080i Yes 1080p Yes 1 When connecting with a HDMI to DVI cable 1 Connect the digital set-top box to H D M I I N jack on the set.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable 1 Connect the video output sockets (Y PB PR) of the DVD to the C O M P O N E N T I N V I D E O sockets (Y PB PR) of the set. 2 Connect the audio cable from the DVD to C O M P O N E N T I N A U D I O sockets of the set. 3 Press the I N P U T button to select C o m p o n e n t. 4 Press the P L A Y button on the DVD. The DVD playback picture appears on the screen.
EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart 1 Connect the Euro scart socket of the DVD to the Euro scart socket of the set. 2 Press the I N P U T button to select A V 1. AV 1 1 3 Press the P L A Y button on the DVD. The DVD playback picture appears on the screen. (R) (L) AUDIO/ VIDEO AUDIO ! NOTE G G Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV 1 can be received.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and set. ■ Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage may remain on the sides of the screen. ■ When connecting with an antenna ANTENNA IN/ CABLE IN ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L R 1 2 Wall Jack Antenna 1 Connect the RF out socket of the VCR to the aerial socket of the set.
EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable Press the PLAY button on the VCR. The VCR playback picture appears on the screen. R ANT OUT ANT IN 3 1 L Press the INPUT button to select AV2. AUDIO R 2 (MONO) L AV 1 AV IN 2 VIDEO Connect the audio/video out sockets of the VCR to AUDIO/VIDEO in sockets of the set. S-VIDEO VIDEO 1 S-VIDEO ! NOTE G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.
EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart 1 2 Connect the Euro scart socket of the VCR to the Euro scart socket of the set. AV 1 Press the P L A Y button on the VCR. If your VCR outputs an AV switching signal via the Scart lead, the set will auto switch to A V 1 mode on start of playback, but if you want to keep on watching in TV mode, press the D / E or NUMBER buttons. Otherwise press the I N P U T button on the remote control handset to select A V 1.
EXTERNAL EQUIPMENT SETUP PC SETUP This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings. When connecting with a D-sub 15 pin cable 1 Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. 2 Connect the audio cable from the PC to the A U D I O I N ( R G B / D V I ) sockets of the set. 3 Press the INPUT button to select R G B. 4 Switch on the PC, and the PC screen appears on the set.
EXTERNAL EQUIPMENT SETUP When connecting with a DVI cable 1 2 Connect the DVI output of the PC to the D V I - D I N jack on the set. DVI-D IN (PC) AUDIO IN (RGB/DVI) Connect the audio cable from the PC to the A U D I O I N ( R G B / D V I ) sockets of the set. 1 2 AUDIO DVI OUTPUT ! NOTE If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.
EXTERNAL EQUIPMENT SETUP BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable management as shown in the illustration. Cable management Tie cables together with a cable tie as shown in the illustration.
EXTERNAL EQUIPMENT SETUP RGB/DVI[PC] Resolution 720x400 640x480 800x600 1024x768 1152x864 1280x1024 1680x1050 1600x1200 1920x1080 Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 64.674 65.290 75.000 66.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. TV/PC MUTE POWER PIP INPUT TEXT I/II 1 2 3 4 5 6 7 8 9 TV/PC Selects TV or PC mode. Switches the set on. POWER Switches the set on or off. INPUT External input mode rotates in regular sequence. Switches the set on. MUTE Switches the sound on or off. PIP Switches the sub picture PIP, DW mode. (Refer to the p.32) 0 LIST Q.
WATCHING TV /PROGRAMME CONTROL TV/PC MUTE Yellow key Scroll through the programmed Favorite programme. POWER PIP INPUT TEXT I/II 1 2 3 4 5 6 7 8 9 Colour Buttons These buttons are used for teletext or programme edit. (Refer to the p.29, 53-55) HOLD Press the button to stop the automatically rotating of the sub pages. Press the button again to continue the automatic rotating again.
WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV When your set is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. ■ To turn set on, press the , I N P U T, P R D / E button on the TV or press the P O W E R, I N P U T, P R D / E, N U M B E R( 0 - 9 ) buttons on the remote control and the set will switch on.
WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D / 2 Press the G button and then D / 3 Change the setting of an item in the sub or pull-down menu with F / You can move to a higher level menu by pressing the O K. E button to display each menu. E button to select a menu item. G button.
WATCHING TV /PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the P R D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. Setup 1 Press the M E N U button and then D / S e t u p menu.
WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. 1 Press the M E N U button and then D / menu. 2 Press the G button and then D / T u n i n g. E button to select the S e t u p E button to select M a n u a l Setup 3 Press the 4 Press the F / G button or NUMBER buttons to select the desired programme number (0 to 99).
WATCHING TV /PROGRAMME CONTROL FINE TUNING Setup Normally fine tuning is only necessary if reception is poor. 1 Press the M E N U button and then D / S e t u p menu. 2 Press the G button and then D / T u n i n g. E Auto Tuning Manual Tuning Programme Edit Favourite Programme G To Set button to select the E button to select M a n u a l DE F G O K RETURN Manual Tuning 3 Press the G button and then D / 4 Press the G button and then best picture and sound.
WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT This function enables you to delete or skip stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. 1 Press the M E N U button and then D / S e t u p menu. button to select the button to select P r o g r a m m e 2 Press the G button and then D / E d i t. 3 Press the G button to display the Programme edit menu.
WATCHING TV /PROGRAMME CONTROL FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Setup 1 Press the M E N U button and then D / S e t u p menu. E button to select the Auto Tuning Manual Tuning Programme Edit Favourite Programme E button to select F a v o u r i t e 2 Press the G button and then D / P r o g r a m m e. 3 Press the G button. 4 Press the D / 5 Select a desired programme with the F / G button or NUMBER buttons.
WATCHING TV /PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. A Displaying programme list Press the L I S T button to display the Programme list menu. The programme list appears on the screen. One programme list contains ten programmes as shown. ! NOTE a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b.
PICTURE CONTROL WATCHING PIP (PICTURE-IN-PICTURE) PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. PIP function is available in the RGB-PC, DVI input only.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; 1 6 : 9 , O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m 1 / 2 and J u s t S c a n. Just Scan works in the following mode: Component (720p/1080i/1080p), HDMI (720p/1080i/1080p) If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D / E button. This function works in the following signal.
PICTURE CONTROL • Zoom1 The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. • Just Scan Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Just Scan Zooml DE • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu based on the programme category. Vivid, Standard, Cinema, Sport and Game are programmed for optimum picture reproduction at the factory and cannot be changed. 1 Press the M E N U button and then D / P i c t u r e menu. 2 Press the G button and then D / M o d e.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User Mode Backlight Contrast Brightness Colour Sharpness Tint Adjust the brightness of LCD panel to control the brightness of the screen. Adjusts the difference between light and dark levels in the picture. Increases or decreases the amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.
PICTURE CONTROL Auto Colour Tone Control(Cool/Medium/Warm) To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. This menu is activated after selecting “User1” or “User2” in the Picture Mode. 1 Press the M E N U button and then D / the P i c t u r e menu. 2 Press the G button and then D / T e m p e r a t u r e.
PICTURE CONTROL Colour Tone - User Mode To adjust red, green, blue to any colour temperature you prefer. This menu is activated after selecting “User1” or “User2” in the Picture Mode. Picture 1 Press the M E N U button and then D / P i c t u r e menu. 2 Press the G button and then D / T e m p e r a t u r e. E button to select C o l o u r 3 Press the G button and then D / E button to select U s e r. 4 Press the G button and then D / or B l u e.
PICTURE CONTROL - PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It is not possible to use this function in RGB-PC/DVI input. This menu is activated after selecting the U s e r 1 or U s e r 2 of P i c t u r e M o d e. 1 Press the MENU button and then D / P i c t u r e menu. E button to select the 2 Press the G button and then D / E button to select X D.
PICTURE CONTROL ADVANCED - GAMMA High gamma values display whitish images and low gamma values display high contrast images. It is not possible to use this function in RGB-PC/DVI input. Picture 1 Press the M E N U button and then D / P i c t u r e menu. 2 Press the G button and then D / E button to select A d v a n c e d. 3 Press the G button and then D / E button to select G a m m a. 4 Press the G button and then D / M e d i u m or H i g h .
PICTURE CONTROL PICTURE RESET Returns to the default factory setting for Picture Mode, Colour Temperature, XD, Advanced, Aspect Ratio. Picture 1 Press the M E N U button and then D / P i c t u r e menu. 2 Press the G button and then D / R e s e t. 3 Press the G button to initialize the adjusted value.
PICTURE CONTROL SCREEN SETUP FOR PC MODE Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, clock, and phase. The displayed image will be unstable for a few seconds while the auto configuration is in progress. 1.
PICTURE CONTROL Manual Configure (Adjustment for screen Phase, Clock, Position) (RGB [PC] mode only) If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust C l o c k. It’s not available to use Phase, Clock function in COMPONENT (480i/480p/576i/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p).
PICTURE CONTROL Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of Resolution. This function works in the following mode: RGB-PC input mode. Picture 1 Press the M E N U button and then use D / P i c t u r e menu. 2 Press the G button and then use D / 3 4 E button to select the E button to select S c r e e n. Press the G button and then use D / Resolution E button to select Press the G button and then use D / desired Resolution.
SOUND CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; SRS TS XT, Clear Voice, Standard, Music, Cinema, Sport or Game and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
SOUND CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. 1 Press the M E N U button and then D / A u d i o menu. E button to select the 2 Press the G button and then D / V o l u m e. E button to select A u t o 3 Press the G button and then D / E Audio Sound Mode Auto Volume Balance TV Speaker 0 V Off On 0G ........... G button to select O n or O f f.
SOUND CONTROL I/II Stereo/Dual Reception When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Press the I / I I button and then D / E button. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. To switch back to stereo.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off timer function. If current time setting is erased by a power failure or the set is unplugged, reset the clock. 1 Press the M E N U button and then D / T i m e menu. 2 Press the G button and then D / E button to select C l o c k. 3 Press the G button and then D / E button to set the hour. 4 Press the G button and then D / E button to set the minute.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Time 1 Press the M E N U button and then D / T i m e menu. 2 Press the G button and then D / T i m e r. E button to select S l e e p 3 Press the G button and then D / E button to set the minute.
OPTION SETTING ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. Option 1 Press the D / E/ F / G button and then, O K button to select your desired language. Language Country PIP Key Lock Set ID DDC-CI Power Indicator Factory Reset DE F G G To Set G To Set O K RETURN * If you want to change Language/ Country selection 1 Press the M E N U button and then use D / select the O P T I O N menu.
OPTION SETTING KEY LOCK The set can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This set is programmed to remember which option it was last set to even if you turn the set off. Option 1 Press the M E N U button and then D / O p t i o n menu. 2 Press the G button and then D / E button to select K e y L o c k. 3 Press the G button and then D / E button to select O n or O f f.
OPTION SETTING POWER INDICATOR It helps you control LED when power is turned on. Option 1 Press the M E N U button and then D / O p t i o n menu. 2 Press the G button and then D / indicator. 3 Press the G button and then D / E button to select the E button to select P o w e r E button to select O n or O f f.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 2 3 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
TELETEXT SPECIAL TELETEXT FUNCTIONS A TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, P R D / E or NUMBER buttons. Press again to exit this function. A SIZE Selects double height text.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR, etc. A Install new batteries.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the product Press the VOL F / G button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust B a l a n c e in menu option.
APPENDIX ‘Unknown Product’ message appears when the product is connected. A Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) A See if the plug_&_play function is supported by referring to the video card user’s guide. Did you install the driver? After-image appears on the product. After-image appears when the product is turned off. A If you use a fixed image for a long time, the pixels may be damaged quickly.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new set. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 To keep the dust off your screen for a while, wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dishwashing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS LCD Panel Video Signal Screen Type 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 546.86 mm Pixel Pitch 0.248 mm (H) x 0.248 mm (V) Max.
APPENDIX PRODUCT SPECIFICATIONS LCD Panel Video Signal Screen Type 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max.
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
APPENDIX (Hexa) Code Function Note Code Function 79 ARC R/C Button 09 MUTE R/C Button 0B INPUT R/C Button 53 LIST R/C Button 08 POWER R/C Button (Power On/Off) 10 to 19 Number Key 0 - 9 R/C Button 43 MENU R/C Button 1A Q.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel.RS-232C connection cables are not supplied with the TV. RS-232C Setup N HDMI IN RS-232C IN (CONTROL) N Type of Connector; D-Sub 9-Pin Male No.
APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC SET 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) PC SET 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID - Use this function to specify a set ID number. - Refer to ‘Real Data Mapping 1’. See page 69. 1 Press the M E N U button and then use D / O p t i o n menu.
APPENDIX Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) 14. Colour Temperature k u Refer to p.68 15. Red Adjustment k v 00 to 3C 00 to 01 16. Green Adjustment k w 00 to 3C 00 to 01 17. Blue Adjustment k $ 00 to 3C 00 to 64 18. Abnormal Status k z FF 00 to 64 19. Auto Configure j u 01 h 00 to 64 20. Equalize j v Refer to p.69 i 00 to 64 21. Tune Command m a Refer to p.69 01. Power k a 02. Aspect Ratio k c 03.
APPENDIX 0 5 . Volume Control (Command: k f) 0 1 . Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] To show Power On/Off. To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Refer to ‘Real data mapping 1 ’. See page 69.
APPENDIX 10. Sharpness (Command: k k) 15. Red Adjustment (Command: k v) To adjust the screen sharpness. To adjust red in colour temperature. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 3C Data Min : 00 to Max : 64 Refer to ‘Real data mapping 2’. See page 69. Refer to ‘Real data mapping 1 ’. See page 69.
APPENDIX 19 . Auto Configure (Command: j u) 22. Channel Skip(Command: m b) To adjust picture position and minimize image G To set skip status for the current Programme. shaking automatically. It works only in RGB (PC) mode. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip Transmission [j][u][ ][Set ID][ ][Data][Cr] 01 : Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 23.
Make sure to read the Safety Precautions before using the product. Keep the User’s Guide(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.
