ENGLISH OWNER’S MANUAL CINEMA 3D TV / LED LCD TV Please read this manual carefully before operating the your TV and retain it for future reference. CINEMA 3D TV MODEL LED LCD TV MODEL DM2382D M2382D M2482D www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 4 LICENSES 5 INSTALLATION PROCEDURE 6 ASSEMBLING AND PREPARING 6 7 8 9 10 11 11 12 13 14 15 Unpacking - CINEMA 3D TV - LED LCD TV Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the Stand - Mounting on a table - Tidying cables - Detaching the Stand - Mounting on a wall 17 WATCHING TV 17 Turning the TV on for the first time 19 MAKING CONNECTIONS 19 20 Connecting an antenna Connecting to a HD receiver, DVD, VCR player or
TABLE OF CONTENTS SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 50 51 52 52 53 RS-232C Setup RS-232C configurations Communication Parameters Command reference list Transmission / Receiving protocol ENGLISH 50 EXTERNAL CONTROL DEVICE 3
LICENSES LICENSES ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
INSTALLATION PROCEDURE 5 INSTALLATION PROCEDURE 2 Attach the stand to the TV. 3 Connect an external device to the TV. NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are yy using. New features may be added to this TV in the future. yy ENGLISH 1 Open the package and make sure all the accessories are included.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. NOTE The accessories supplied with your product may vary depending on the model.
ASSEMBLING AND PREPARING CINEMA 3D TV 7 DM2382D ENGLISH Remote control / Batteries (AAA) CD (Owner's Manual) / Cards (See p.32) RGB Cable (See p.31) Power Cord AC-DC Adapter Cable Tie (See p.12) (See p.12) (See p.13) Stand Base Stand Body Screws for Assembly 2 EA (See p.11) (See p.11) (See p.11) TriDef 3D Game Software CD / Quick Installation Guide 3D Glasses(Normal type / Clip type) The number of 3D glasses may differ depending on the model or country.
ASSEMBLING AND PREPARING LED LCD TV M2382D M2482D ENGLISH Remote control / Batteries (AAA) CD (Owner's Manual) / Cards (See p.34) RGB Cable (See p.31) Power Cord AC-DC Adapter Cable Tie (See p.12) (See p.12) (See p.13) Stand Base Stand Body Screws for Assembly 2 EA (See p.11) (See p.11) (See p.
ASSEMBLING AND PREPARING 9 Parts and buttons ENGLISH PCMCIA Card Slot Standby Light yyLighting On: Turned off yyLighting Off: Turned on Remote Control Sensor Touch Buttons 2 AV IN 2 (MONO) AV 1 1 Connection panel (See p.19) Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source.
ASSEMBLING AND PREPARING Lifting and moving the TV ENGLISH When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. When holding the TV, the screen should face yy away from you to prevent the screen from scratches. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING Setting up the TV 11 3 Secure the TV and the Stand Body with the Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 Place the TV with the screen side down on a flat and cushioned surface. WARNING If you don`t fasten the screw tightly, TV will fall down and get damaged. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage.
ASSEMBLING AND PREPARING Mounting on a table WARNING ENGLISH 1 Lift and tilt the TV into its upright position on a table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold yy the buttom of the TV frame as shown on the following illustration, as may injure your fingers. 10 cm 10 cm 10 cm 10 cm This TV does not have a swivel function. Do yy not turn the TV screen to the left or right. Doing so may cause damage.
ASSEMBLING AND PREPARING 13 Using the Kensington security system NOTE -5 +20 The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the TV and a table. Front Rear Tidying cables Gather and bind the cables with the supplied cable tie.
ASSEMBLING AND PREPARING Detaching the Stand ENGLISH 1 Place the TV with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When detaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body.
ASSEMBLING AND PREPARING Mounting on a wall 15 5 Please use VESA standard as below. 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws.
ASSEMBLING AND PREPARING CAUTION ENGLISH Disconnect the power cord first, and then yy move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury. Use an authorized LG wall mount and yy contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the TV and void your warranty. Use the screws and wall mounts that meet yy the VESA standard.
WATCHING TV 17 WATCHING TV When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 Press on the TV or power button on the remote control to turn the TV on. The Standby Light is turned off. NOTE When the TV is in Power saving mode, the Standby Light turns amber. 3 The initial setting screen appears if you access the TV for the first time.
WATCHING TV NOTE ENGLISH For those countries without confirmed DTV broadcasting standards, some DTV features might not yy work, depending on the DTV broadcasting environment. When France is selected for Country, the initial password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. yy To display images in the best quality for your home environment, select Home Use mode. yy Store Demo mode is suitable for the retail environment.
MAKING CONNECTIONS 19 MAKING CONNECTIONS NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input yy cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device. The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port.
MAKING CONNECTIONS Connecting to a HD receiver, DVD, VCR player or Gaming device HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy Supported DTV Audio: MPEG, Dolby Digital.
MAKING CONNECTIONS 21 HDMI to DVI connection NOTE If you do not use an optional external speaker, connect the external device to the TV with the optional audio cable. DVI OUT AUDIO OUT DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) (Not Provided) 2 AV IN 2 (MONO) AV 1 1 ENGLISH Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the HDMI-DVI cable as shown in the following illustration.
MAKING CONNECTIONS Component connection NOTE If cables are installed incorrectly, it could case the image to display in black and white or with distorted yy color. Check to ensure the cable are matched with the corresponding color connection. yy VIDEO Y AUDIO PB PR L R DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) (Not Provided) 2 AV IN 2 (MONO) 1 AV 1 ENGLISH Transmits the analog video and audio signals from an external device to the TV.
MAKING CONNECTIONS 23 Composite connection NOTE Check to ensure the cable are matched with the corresponding color connection. 2 AV IN 2 (MONO) AV 1 1 (Not Provided) VIDEO (MONO) L AUDIO R DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration.
MAKING CONNECTIONS Euro Scart connection Output Type AV1 (TV Out1) Current input mode AV1 (When DTV scheduled recording is in progress using recording equipment.) Digital TV Digital TV O Analogue TV, AV Analogue TV O (The input mode is converted to DTV.) Component/ RGB HDMI NOTE Any Euro scart cable used must be signal shielded. yy When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART yy cable.
MAKING CONNECTIONS 25 Connecting to an audio system ENGLISH Use an optional external audio system instead of the built-in speaker. NOTE If you use an external audio device instead of the built-in speaker, set the TV speaker feature to off. Digital optical audio connection Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown on the following illustration. CAUTION Do not look into the optical output port.
MAKING CONNECTIONS Headphone connection NOTE AUDIO menu items are disabled when connecting a headphone. yy When changing AV MODE with a headphone connected, the change is applied to video but not to yy audio. Optical digital audio out is not available when connecting a headphone. yy Headphone impedance: 16 yy Max audio output of headphone: 10 mW to 15 mW yy Headphone jack size: 0.35 cm yy 2 AV IN 2 (MONO) 1 AV 1 ENGLISH Transmits the headphone signal from the TV to an external device.
MAKING CONNECTIONS 27 Connecting to a USB 2 AV IN 2 (MONO) AV 1 1 or USB (Not Provided) Connecting to a CI Module View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
MAKING CONNECTIONS Connecting to a PC ENGLISH Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that reproduces sound clearly with a rich bass. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE It is recommended to use the TV with the HDMI connection for the best image quality.
MAKING CONNECTIONS 29 HDMI connection NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy If you want to use HDMI-PC mode, you must set the input label to PC or DVI mode. yy Supported DTV Audio: MPEG, Dolby Digital. yy Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/ yy 192k, DTS Not supported.) HDMI OUT PC (Not Provided) 2 AV IN 2 (MONO) AV 1 1 Choose any HDMI input port to connect.
MAKING CONNECTIONS HDMI to DVI connection NOTE If you want to use HDMI-PC mode, you must set the input label to PC or DVI mode. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yy DVI OUT AUDIO OUT PC (Not Provided) (Not Provided) 2 AV IN 2 (MONO) 1 AV 1 ENGLISH Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations.
MAKING CONNECTIONS 31 RGB connection NOTE If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. 2 AV IN 2 (MONO) AV 1 1 (Not Provided) RGB OUT (PC) AUDIO OUT PC ENGLISH Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
REMOTE CONTROL REMOTE CONTROL ENGLISH CINEMA 3D TV DM2382D The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
4 7 SETTINGS Accesses the main menus or saves your input and exit menus. LIST (BACK) Allows the user to move return one step in an interactive application, EPG or other user interaction function. Coloured buttons These buttons are used for teletext (on TELETEXT models only) , Programme edit. Teletext buttons These buttons are used for teletext. For further details, see the ‘Teletext’ section. USB Menu control buttons USB menu(Photo List and Music List or Movie List). (User Guide)(See p.
REMOTE CONTROL LED LCD TV M2382D M2482D ENGLISH The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
4 7 LIST GUIDE Shows programme guide. 6 9 FAV INFO P Teletext buttons These buttons are used for teletext. For further details, see the ‘Teletext’ section. USB Menu control buttons USB menu(Photo List and Music List or Movie List). (User Guide)(See p.37) Accesses the User Guide menu. P A G E Q.MENU Accesses the quick menus. MUTE OK (BACK) Allows the user to move return one step in an interactive application, EPG or other user interaction function.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH Accessing main menus 1 Press SETTINGS to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press (BACK). AUDIO Adjusts the sound quality, effect,\ or volume level. PICTURE Adjusts the image size, quality or effect.
RATIO INPUT ENERGY TV/ RAD USING THE USER GUIDE SAVING 1 2 37 3 7 User 8 Guide 9 menu. Accessing 0 Using the TV menu LIST Q.VIEW Image shown may differ from your TV. yy User Guide 3 2 To use input device to access the main menus. 1 Press SETTINGS FAV P A G E 2 Press the RED button 3D to access P the Customer Support menus. to scroll to User 3 Press the Navigation button 3D OPTION 4 5 When you are finished, OK press EXIT. When you return to the previous menu, press (BACK).
3D IMAGING(ONLY CINEMA 3D TV) 3D IMAGING(ONLY CINEMA 3D TV) ENGLISH 3D Technology This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format. NOTE After powering on the TV, a few seconds may be needed for your TV to calibrate. yy When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART yy cable.
MAINTENANCE 39 MAINTENANCE Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth.
MAINTENANCE Preventing “Image burn” or “Burn-in” on your TV screen ENGLISH If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become yy a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the yy letterboxed area of the screen.
TROUBLESHOOTING 41 TROUBLESHOOTING ENGLISH General Problem Resolution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
SPECIFICATIONS SPECIFICATIONS ENGLISH DM2382D Panel Video Signal Screen Type 584.2 mm Wide (23 inch) IPS(In-Plane Switching technology) Panel. Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max.
SPECIFICATIONS ENGLISH M2382D Panel Video Signal Screen Type 584.2 mm Wide (23 inch) IPS(In-Plane Switching technology) Panel. Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max.
SPECIFICATIONS M2482D ENGLISH Panel Video Signal Screen Type 609.7 mm Wide (24 inch) LED(light-emitting diode) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 609.7 mm Pixel Pitch 0.276 mm (H) x 0.276 mm (V) Max.
SPECIFICATIONS RGB (PC) / HDMI (PC) supported mode Component supported mode Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.080 720 x 480 15.730 59.940 640 x 480 31.469 59.940 720 x 480 15.750 60.000 640 x 480 37.500 75.000 720 x 576 15.625 50.000 800 x 600 37.879 60.317 720 x 480 31.470 59.940 800 x 600 46.875 75.000 720 x 480 31.500 60.000 1024 x 768 48.363 60.004 720 x 576 31.
SPECIFICATIONS NOTE ENGLISH Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may yy become permanently imprinted on the screen. Use a screen saver when possible. There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. yy Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.
SPECIFICATIONS 47 3D video input format supported. (Only CINEMA 3D TV) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video format 720p 1280 x 720 89.9 90 59.94 60 Frame Packing 45 60 Side by Side(half), Top & Bottom 1080i 1920 x 1080 33.7 60 Side by Side(half), Top & Bottom 1080p 1920 x 1080 53.95 54 23.98 24 Frame packing 67.5 60 Side by Side, Top & Bottom, Single Frame Sequential 27 24 Side by Side(half), Top & Bottom 33.
IR CODE (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) ENGLISH IR CODE (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) This feature is not available for all models. yy Code (Hexa) 08 Function Note R/C BUTTON (POWER ON/OFF) 95 (POWER) Energy Saving ( 79 Ratio R/C BUTTON 0B Input R/C BUTTON F0 TV/RAD R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTTON 53 LIST R/C BUTTON 1A Q.
IR CODE (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 49 Only 3D Model Function Note DC 3D R/C BUTTON 45 Q.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the Control & Service jack on the product back panel.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 51 RS-232C configurations ENGLISH 3-Wire Configurations(Not standard) PC TV RXD 2 3 TXD L TXD 3 2 RXD R GND 5 5 GND GN DTR 4 6 DSR D DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 stereo jack Set ID Set ID number. "Real Data Mapping" on See p.57 1 Press SETTINGS to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press OK.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) Communication Parameters ENGLISH Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Command reference list DATA (Hexadecimal) COMMAND1 COMMAND2 01. Power k a 00 to 01 02. Aspect Ratio x c See p.54 03. Screen Mute k d 00 to 01 04. Volume Mute k e 00 to 01 05.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 53 Transmission / Receiving protocol [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired TV ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 01. Power (Command: k a) To control Power On/Off of the set. ENGLISH Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] To show Power On/Off.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping ’. See p.57 11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) ENGLISH 15. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Transmission [j][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping ’. See p.57 Data 01: To set Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 16.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 20. Programme Add/Skip (Command: m b) To set skip status for the current Programme. Data 00 : Skip 21. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 01 : Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 to Max : 64 * Data Key cod -See p.
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL) 24. 3D(Command: x t) (only 3D model) To change 3D mode for TV. 25. Extended 3D(Command: x v) (only 3D model) To change 3D mode for TV.
UK Only
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com .
