Owners manual

Controlling Multiple Products
RS-232C
A5
Transmission / Receiving Protocol
01. Power (Command 1: k, Command 2: a)
► To control Power On / Off of the Set.
Transmission Acknowledgement
Data 0 : Power Off 1 : Power On FF : Read Status
[k][a][ ][Set ID][ ][Data][Cr] [a][ ][Set ID][ ][OK/NG][Data][x]
02. Input List (Command 1: x, Command 2: b)
► To select input list for the Set.
Transmission Acknowledgement
Data (Hex)
03. Picture Mode (Command 1: d, Command 2: x)
► To adjust the picture mode.
Transmission Acknowledgement
Data (Hex)
[x][b][ ][Set ID][ ][Data][Cr]
[d][x][ ][Set ID][ ][Data][Cr]
[b][ ][Set ID][ ][OK/NG][Data][x]
[x][ ][Set ID][ ][OK/NG][Data][x]
Data Input List
60 RGB
A0 HDMI
20 AV
40 Component
Data / Input List RGB HDMI AV Component
05 User User User User
00 Vivid Vivid Vivid Vivid
01 Standard Standard Standard Standard
02 Cinema Cinema
04 Game Game Game Game