Owners manual

Controlling Multiple Products
RS-232C
A6
Transmission / Receiving Protocol
04. Brightness (Command 1: k, Command 2: h)
► To adjust screen brightness.
Transmission Acknowledgement
Data Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : RGB, HDMI, AV, Component
[k][h][ ][Set ID][ ][Data][Cr] [h][ ][Set ID][ ][OK/NG][Data][x]
05. Contrast (Command 1: k, Command 2: g)
► To adjust screen contrast.
Transmission Acknowledgement
Data Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : RGB, HDMI, AV, Component
[k][g][ ][Set ID][ ][Data][Cr] [g][ ][Set ID][ ][OK/NG][Data][x]
06. Color (Command 1: k, Command 2: i)
► To adjust the screen color.
Transmission Acknowledgement
Data Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : AV, Component
[k][i][ ][Set ID][ ][Data][Cr] [i][ ][Set ID][ ][OK/NG][Data][x]
07. Tint (Command 1: k, Command 2: j)
► To adjust the screen tint.
Transmission Acknowledgement
Data Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : AV
ex) 00H : R50
64H : G50
If the screen tint is set to 0 in the menu, it becomes a hexademical code (0 x 32) in the transfer
protocol.
[k][j][ ][Set ID][ ][Data][Cr] [j][ ][Set ID][ ][OK/NG][Data][x]