Owners manual

Controlling Multiple Products
RS-232C
A14
Transmission / Receiving Protocol
35. Key (Command 1: m, Command 2: c)
► To send IR remote key code.
Transmission Acknowledgement
Data (Hex)
[m][c][ ][Set ID][ ][Data][Cr] [c][ ][Set ID][ ][OK/NG][Data][x]
Data IR Remote Key Data IR Remote Key
08 Power 00 Up
43 Menu 01 Down
5B Exit 02 Left
0B Source (Input list) 03 Right
44 Enter
33. Hysteresis (Command 1: g, Command 2: e)
► Sets the temperature difference between when the fan is operating and it stops.
Transmission Acknowledgement
Data Min : 00H to Max : 14H (*transmit by Hexadecimal code)
[g][e][ ][Set ID][ ][Data][Cr] [e][ ][Set ID][ ][OK/NG][Data][x]
34. Current Temp (Command 1: d, Command 2: n)
► Checks the internal temperature.
Transmission Acknowledgement
The data is always FF (in Hex) To read the temperature value
[d][n][ ][Set ID][ ][Data][Cr] [n][ ][Set ID][ ][OK/NG][Data][x]
36. Power Saving Mode (Command 1: f, Command 2: j)
► Set the DPM (Display Power Management) function.
Transmission Acknowledgement
Data 0 : Off, 1 : On
[f][j][ ][Set ID][ ][Data][Cr] [j][ ][Set ID][ ][OK/NG][Data][x]