User manual

Owner's Manual 13

ENGLISH

Energy-Saving Cooling Mode (Optional)

Operating Instructions

The Display Luminosity can be adjusted by using the remote control.

Open the door of the remote controller, and press the LCD LUMINOSITY button.

Display will be dark. Press the button again to set bright display.

Forced operation

Operation procedures when the remote control can't be used. The operation will be started if the ON/OFF button

is pressed. If you want to stop operation, re-press the button.

Energy-saving cooling mode can save energy in cooling and healthy dehumidification operation, because it

can operate efficiently by setting body-adaptation time according to the change of time and temperature and

adjusting automatically desired temperature.

1. Press the ON/OFF BUTTON to start the unit.

2. Open the door of the remote controller. Select cooling

operation or healthy dehumidification operation.

3. Press the ENERGY-SAVING COOLING MODE BUTTON.

4. To cancel the energy-saving cooling mode, press the ENERGY-SAV-

ING COOLING MODE BUTTON again and unit will operate in previous

mode(Cooling or healty dehumidification mode).

Heat pump Model

Cooling Model

Room Temp. ≥ 24°C 21°C ≤ Room Temp. < 24°C Room Temp. < 21°C

Operating mode Cooling Cooling Healthy Dehumidification Heating

Indoor FAN Speed

High High High High

Setting Temperature

22°C 22°C 23°C 24°C

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature

and resets in 18 minutes.

During test operation, if remote controller signal is received, the unit operates as remote controller sets.

If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep".

If you want to stop the operation, re-press the button.

Display Luminosity (Optional)

ON/OFF

button

Power

button

Power

button

Because Energy-Saving Cooling Mode is optional function, some product will not operate.

Because Display Luminosity is optional function, some product will not operate.