ENGLISH OWNER'S MANUAL NETWORK MONITOR Please read the safety information carefully before using the product. Network Monitor Models N195WU N225WU www.lg.
Table of Contents ENGLISH ENG TABLE OF CONTENTS 3 ASSEMBLING AND PREPARING 25 TROUBLESHOOTING 3 Unpacking 4 Parts and buttons 27 PRODUCT SPECIFICATION 7 Lifting and moving the Monitor set 29 Preset Mode 7 Setting Up the Monitor set 29 Power Indicator 7 - Attaching the Stand Base 8 - Detaching the stand base 8 - Adjusting the stand body 30 PROPER POSTURE 9 - Adjusting the angle 30 Proper posture for using the monitor 9 - Mounting on a table 10 - Using the Kensington lock
ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. User Manual/ Software Installation CD/ Card Power Cord Stand Base 15-pin D-SUB Signal Cable AC/DC adaptor A-B Type USB Cable CAUTION Only use an approved LG power adapter.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG N195WU Power Indicator y yLED On : Power is on y yLED Off: Power is off (Power Button) Input Connectors (See p.15) Front Buttons Input Connectors (See p.13 to 14) NOTE Keep radio away 10 cm from the front side buttons and power button.
ASSEMBLING AND PREPARING 5 ENG ENGLISH N225WU Power Indicator y yLED On : Power is on y yLED Off: Power is off (Power Button) Input Connectors (See p.15) Front Buttons Input Connectors (See p.13 to 14) NOTE Keep radio away 10 cm from the front side buttons and power button.
ASSEMBLING AND PREPARING Button ENGLISH ENG MENU Description Activates the main menu. OSD Lock/Unlock Functions Locks/unlocks the OSD screen. y y To lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked. y y To unlock the OSD screen, press and hold the MENU button again for several seconds. The "OSD UNLOCKED" message will be displayed and the screen will be unlocked.
ASSEMBLING AND PREPARING When moving or lifting the Monitor set, read the following to prevent the Monitor set from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION Avoid touching the screen at all times, as this yy may result in damage to the screen or some of the pixels used to create images. Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down.
ASSEMBLING AND PREPARING ENGLISH ENG Detaching the stand base Adjusting the stand body 1 Place the monitor's screen face down. 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body. Stand Body Stand Base CAUTION The components appearing in the illustrayy tions may look different from the actual product.
ASSEMBLING AND PREPARING Mounting on a table 1 Place the monitor mounted on the stand base 1 Lift the monitor and place it on the table in an in an upright position. 2 Adjust the angle of the screen. The angle of the upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. screen can be adjusted up to 15° forwards and 5° backwards for a comfortable viewing experience.
ASSEMBLING AND PREPARING ENGLISH ENG Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table with the Kensington lock cable. NOTE Using the Kensington lock is optional. The yy accessories can be purchased at your local electronics store.
ASSEMBLING AND PREPARING 11 Installing the wall mount plate 1 Place the monitor's screen face down. To This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. 2 Using a screwdriver, Remove the Cover and 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. detach from the monitor. protect the screen from scratches, cover the surface with a soft cloth.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a wall Model Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.
USING THE MONITOR SET 13 Using Primary Station CAUTION This monitor supports the *Plug and Play yy feature. *Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-SUB IN connection - PC D-SUB IN transfers analog video signals from the PC to the monitor. Connect the monitor to the PC using the provided 15-pin D-SUB signal cable as illustrated below.
USING THE MONITOR SET Using Standard Stations ENGLISH ENG USB cable connection - PC The digital signal is transmitted from the PC to the monitor through the USB cable. Connect the PC and the monitor using the A-B type USB cable provided as shown in the picture below. USB cable connection to Daisy Chain The digital signal is transmitted from the PC to the monitor through the USB cable. Connect monitors using the A-B type USB cable provided as shown in the picture below. Back of the product.
USING THE MONITOR SET Peripheral device connection Right NOTE Peripheral devices are sold separately. yy The USB ports on the bottom of the moniyy tor can be used to connect the keyboard, mouse, and other USB devices. But, USB ports on the right of the monitor can't be used to connect the keyboard. Headphones, speakers or microphone may yy not work normally, depending on the server PC settings. Virtual solutions may affect the functions or yy speed of the specific USB storage device.
CUSTOMIZING SETTINGS ENGLISH ENG CUSTOMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 To change the settings of the selected item press the buttons on the front of the monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. N195WU N225WU Front Side Buttons AUTO (See p.24) Optimizes the resolution.
CUSTOMIZING SETTINGS 17 MENU Settings MENU ENG ENGLISH Picture PICTURE 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the BRIGHTNESS CONTRAST SHARPNESS front of the monitor. 4 Select EXIT to leave the OSD menu. EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Color ENGLISH ENG MENU COLOR 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. COLOR TEMP PRESET RED GREEN BLUE GAMMA PRESET WARM GAMMA 1 4 Select EXIT to leave the OSD menu. EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Display MENU 19 DISPLAY ENG ENGLISH 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the HORIZONTAL VERTICAL CLOCK PHASE front of the monitor. 4 Select EXIT to leave the OSD menu. EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Volume MENU VOLUME ENGLISH ENG 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. 4 Select EXIT to leave the OSD menu. EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Others MENU 21 OTHERS ENG ENGLISH 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. LANGUAGE POWER OFF OSD POWER INDICATOR BUTTON INDICATOR WHITE BALANCE FACTORY RESET English ON ON ON NO NO 4 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS SMART+ Settings ENGLISH ENG Auto Bright (Only N195WU model) SMART+ AUTO BRIGHT 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. ON 2 Press the SMART+ button to display the op- OFF tions in the OSD menu. EXIT 3 Set the options by pressing the buttons on the front of the monitor. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Original Ratio SMART+ 23 ORIGINAL RATIO ENG ENGLISH 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the SMART+ button to display the options in the OSD menu. WIDE ORIGINAL 3 Set the options by pressing the buttons on the front of the monitor. EXIT 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS AUTO Settings : D-SUB Input ENGLISH ENG 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the AUTO button to automatically adjust the screen. 3 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( N195WU PROCESSING AUTO IMAGE ADJUSTMENT FOR OPTIMAL DISPLAY CHANGE RESOLUTION TO 1366 x 768 ) button.
Troubleshooting 25 Nothing is displayed on the screen Is the monitor's power cord y y Check if the power cord is correctly plugged in to the outlet. plugged in? Is the power indicator on? y y Check the power indicator. Is the power indicator displaying y y Adjust the brightness and the contrast. as purple? Is the power indicator blinking? y y If the monitor is in power saving mode, move the mouse or press any key on the keyboard to switch the display on. y y Check if the computer is turned on.
Troubleshooting ENGLISH ENG The image is displayed abnormally. Does the display area appear Pressing the AUTO button will automatically optimize the screen to the uncentered? current display mode. If you are not satisfied with the optimized screen, you can manually adjust the POSITION option in the OSD menu. Does the screen exhibit vertical Pressing the AUTO button will automatically optimize the screen to the lines? current display mode.
Product Specification N195WU LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector Power AC/DC Adapter Dimension Weight (Without Packaging) Stand Angle Adjustment Environment Condition 470.1 mm (18.51 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 470.1 mm 0.30 mm x 0.
Specifications ENGLISH ENG N225WU LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector Power AC/DC Adapter Dimension Weight (Without Packaging) Stand Angle Adjustment Environment Condition 546.8 mm (21.53 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 546.8 mm 0.248 mm x 0.
Product Specification 29 Preset Mode ENG ENGLISH N195WU Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.363 60 -/- 1360 x 768 47.712 60 +/+ 1366 x 768 47.712 60 +/+ Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.
Proper Posture ENGLISH ENG PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every yy hour. The stand is designed to best support the monitor when the optimal conditions are selected. yy Adjust the angle of the monitor from -5° to 15° to obtain the best view of the screen. You should be looking slightly down at the screen.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
