Guía del usuario y manual de instrucciones LG Network Storage N2B1 / N2R1
Advertencia de la seguridad Advertencia de seguridad Nota 1 2 3 4 No ponga ningún objeto dentro de los 15cm de la unidad. La unidad alcanza temperaturas altas que crean riesgo de heridas por quemaduras. Utilice solamente los dispositivos compatibles con los puertos del sistema, en caso contrario el sistema y los dispositivos corren el riesgo de ser dañados. No utilice los discos dañados. Puede dañar al producto. No desarme ni cambie la estructura del sistema bajo ninguna forma.
Advertencia de la seguridad Con respecto a los daños al HDD y a los datos - Durante la instalación o la desconexión del sistema, asegúrese de que el sistema no sufra ningún golpe físico externo. - Durante la operación del HDD, asegúrese de que no ocurran las sobrecargas y interrupciones en el suministro de energía que provoquen el prendido y el apagado repentino del sistema. - Interrupción repentina de la electricidad durante la operación.
Advertencia de la seguridad Advertencia 1 2 3 No utilice cables eléctricos dañados. Estos puede causar una descarga eléctrica, y hay riesgo de incendio. Utilice cables y enchufes con conexiones a tierra para evitar descarga eléctrica y daño a los componentes. No maniobre el cable eléctrico con las manos mojadas ya que puede causar descarga eléctrica y lesión. Al quitar el enchufe del zócalo, asegúrese de que sea agarrando el enchufe y 4 no el cable.
Advertencia de la seguridad 14 En caso de que haya relámpagos y truenos, desconecte físicamente el sistema de cualquier fuente de energía, para evitar daño al sistema. En caso de la caída el sistema, contáctese con el centro de servicio para recibir 15 los posibles consjeos y servicios. En caso contrario corre el riesgo de provocar daño, incendio o descarga eléctrica. 16 17 18 Mantenga el sistema lejos de la luz directa del sol para evitar el recalentamiento que puede provocar un incendio y lesión.
Contenido Contenido Advertencia de seguridad...................................... 2 1. Introducción.....................................................10 Introducción al LG Network Storage.....................................10 SO (Sistema Operativo) de soporte ......................................11 Contenido del paquete.......................................................12 Denominación de cada parte...............................................13 2. Instalación de LG Network Storage..............
Contenido 4. U so del menú de la web del LG Network Storage (para los administradores de LG Network Storage) 45 Configuración del sistema...................................................45 Network.................................................................................. 45 Anfitrión............................................................................................46 Interfaz.............................................................................................
Contenido Administración de compartimiento del LG Network Storage .....76 Usuario................................................................................... 76 Grupo..................................................................................... 78 Carpeta.................................................................................. 80 Blu-ray / DVD...................................................................83 Grabación (Burning)...................................................
Contenido 5. U so del menú de la web de LG Network Storage (usuarios regulares) ....................................... 128 Blu-ray / DVD................................................................. 128 Grabación (Burning)................................................................128 Menú superior ....................................................................................132 Mi información .......................................................................132 6.
1. Introducción 1. Introducción Introducción al LG Network Storage Gracias por comprar el LG Network Storage con Built-in Blu-ray Rewriter. 1) Ahora usted puede usar las funciones básicas de almacenamiento e intercambio de datos en los sistemas operativos de Windows, Mac y Linux. 2) Al mismo tiempo, el rewriter interno de Blu-ray / DVD puede ser utilizado para guardar eficientemente los datos con seguridad durante largos periodos.
1. Introducción 4) El LG Network Storage también permite la sincronización móvil, sin el uso de una PC, pues los dispositivos móviles se pueden sincronizar directamente al LG Network Storage. Este manual del usuario contiene la información expresa sobre la instalación así como las opciones y funciones detalladas. SO (Sistema Operativo) de soporte LG Network Storage ∙ Windows XP, Server 2003, Vista ∙ Mac OS 10.
1. Introducción Contenido del paquete ∙ LG Network Storage ∙ Garantía de producto ∙ Software de instalación del LG Network Storage ∙ Guía de instalación rápida Instalación rapida de la guía LG Network Storage N2B1 / N2R1 ∙ Cable eléctrico y adaptador ∙ Tornillo de ajuste del disco duro (x8) – sólo para el cerramiento ∙ Cable de LAN * Las fotografías de las imágenes del manual pueden diferir según los componentes del modelo.
1. Introducción Denominación de cada parte ⑤ ② ⑥ ⑦ ⑧ ⑨ LED del estado de HDD/ ODD: - Azul : funcionamiento correcto - Rojo : estado anormal ⑩ Botón de apertura del disco: abre y cierra la bandeja de la unidad de discos ópticos. ⑪ Blu-ray/DVD Drive ③ ④ ① ⑨ ⑪ ② ① ⑩ ① Botón de encendio: Encendido y apagado (Para apagar, mantener pulsado el botón durante 3 segundos sin soltar). ② Botón SET(S): Selecciona el modo.
2. Instalación del LG Network Storage 2. Instalación de LG Network Storage Siga estas instrucciones para instalar su LG Network Storage. Si su LG Network Storage es interno, por favor empiece por la sección , en caso contrario, por la sección . Instalación y disposición del disco duro El rack del disco duro del LG Network Storage es como se muestra abajo. Refiérasee a cada parte durante la instalación del disco duro.
2. Instalación del LG Network Storage ① Asegúrese de que el aparato esté apagado. ② Abra la cubierta frotal del sistema principal del LG Network Storage. ③ Destrabe el rack del disco duro presionando la palanca de la misma. ④ Mantenga presionado las palancas del rack del disco duro y tire hacia adelante para separarlo del sistema principal. ⑤ Coloque el disco duro en el rack y con un destornillador, coloque los 4 tornillos en sus lugares.
2. Instalación del LG Network Storage ⑥ Asegúrese de que el número del panel delante del LG Network Storage coincida con el número del rack. ⑦ Empuje el estante completamente hacia el interior del sistema principal de LG Network Storage hasta que haga un sonido click.
2. Instalación del LG Network Storage ⑧ Presione el botón de seguridad para prevenir que el rack se separe del aparato. ⑨ De la misma manera, repita los procedimiento de la instalación para todos los discos duros.
2. Instalación del LG Network Storage Instalación del programa “LG Network Storage PC Software Installer ” (Instalación y del archivo del sistema LG Network Storage, la configuración del volumen y del RAID) ① Conecte el adaptador de corriente al enchufe DC. Conecte el “cable de energía” a una toma eléctrica Una vez que el adaptador de corriente esté conectado al enchufe DC, conecte el cable de enertía a una toma eléctrica.
2. Instalación del LG Network Storage ④ El sistema carga los archivos del sistema al reiniciarse. No se podrá acceder al LG Network Storage durante este procedimiento. ⑤ Luego de aproximadamente 60 segundos se completará el reinicio del sistema con un sonido de alarma de luces. (En caso de que la conexión a la red haya sido activada) ⑥ Toda la instalación básica para el funcionamiento del LG Network Storage está completada.
2. Instalación del LG Network Storage Conexión de LG Network Storage En un ambiente con un servidor DHCP, la selección de búsqueda automática de IP luego de conectar el LG Network Storage a un enrutador/switch/hub de IP traerá la información de la red desde el servidor DHCP. Para una dirección IP particular asignada por el administrador del IP de la red, la instalación usando una dirección IP, el subnet mask, el gateway por defecto y la información asignada del DNS es más simple.
2. Instalación del LG Network Storage Cable LAN PC de escritorio LG Network Storage ② *S i se conecta el LG Network Storage directamente a la PC a través del cable LAN, no se podrá ingresar al Internet local de la PC. En ese caso, se debe desconectar el Internet de la PC. Luego de verificar que el cable de energía de LG Network Storag esté conectado, presione el botón de encendido en la parte frontal para activar el LG Network Storage.
2. Instalación del LG Network Storage Los programas que pueden ser instalados dependen del ambiente del sistema operativo del usuario.
2. Instalación del LG Network Storage Instalación del programa de aplicación de la PC ① Inserte el CD del “LG Network Storage PC Software Installer” en el drive óptico de su PC(drive de CD, de DVD o de BD). Inmediatamente aparecerá el siguiente menú. * La instalación en una PC sin un drive de fibra óptica puede ser realizada usando la función iSCSI del LG Network Storage. Vea el Capítulo 4 - iSCSI. ② Se necesita instalar un Flash Player para usar todos los menúes del LG Network Storage.
2. Instalación del LG Network Storage Uso del programa de aplicación de la PC Aquí se explica cómo usar el programa “NAS Detector”. Para una explicación detallada del programa, consulte el manual que está dentro del programa después de la instalación. (“Comnso back-up”/ “Photo DVD Album”/ “CyberLink”) ① Después de comprobar que la red de la PC está intacta, haga doble click en el ícono “NAS Detector” en la parte superior de la pantalla para abrir el programa.
2. Instalación del LG Network Storage * Si no se encuentra el LG Network Storage deseado, haga click otra vez en el botón de ‘Search Network’ para volver a empezar la búsqueda. Si la búsqueda de el ‘NAS Detector’ fracasa, vuelva a verificar la conexión de red. Para la configuración manual vea la sección .
2. Instalación del LG Network Storage ④ Se puede seleccionar “Change Network Info” para cambiar la direccion IP. La opción de selección del DHCP aparece si se usa un enrutador o si hay un servidor DHCP en la red. *S i no se asigna una dirección IP, use el “NAS Detector” de dirección IP o verifique la opción DHCP y se asignará automáticamente una dirección IP. ⑤ Si hace click en el botón “Open Web Menu”, se podrá ingresar al menú de la web del LG Network Storage seleccionado.
2. Instalación del LG Network Storage ⑥ Si hace click en el botón `Open Network Folder’; se podrá ingresar a la carpeta de la red del LG Network Storage. ⑦ En “Open Web Menu” u “Open Network Folder” seleccionado, aparecerá un mensaje pop-up con “Yes” que cuando sea seleccionado hará aparecer un shorcut en la parte superior de la pantalla y luego se podrá acceder fácilmente al menú de la web de LG Network Storage y a la carpeta de la red.
2. Instalación del LG Network Storage El menú de la web ofrece características de la administración del LG Network Storage tales como la información de la red, la administración de compartimiento y la administración del servicio. También ofrece menúes para configurar el almacenamiento de los datos usando los drives de Blu-ray / DVD y el almacenamiento sincronizado de dispositivos móviles.
2. Instalación del LG Network Storage El compartimiento y el almacenamiento de archivos puede ser realizado igual al HDD interno o externo conectado con la PC. ① Haga doble click en el shorcut de la carpeta de la red del LG Network Storage. ② Aparecerá el drive Blu-ray / DVD del LG Network Storage con el nombre de ‘cdrom’ y “service” / “volume”.
2. Instalación del LG Network Storage *S i el contenido del ‘cdrom’ no aparece correctamente, presione el botón de reinicio. * El ID y la contraseña por defecto del LG Network Storage es ‘admin’ y ‘admin’. *L as carpetas ‘volume’ / ‘service’ aparecen únicamente después de que el usuario haya configurado completamente a través del menú del web. El NAS Monitor tiene muchas funciones útiles para el uso del LG Network Storage.
2. Instalación del LG Network Storage [Web Menu] Este menú se usa para acceder a la página web. [Network Folder] Se usa para abrir la carpeta en la red. Con un doble click en el botón izquierdo del mouse abrirá la carpeta en la red. [FTP Server] Es usado para conectarse al servidor FTP. [NAS Detector] El programa NAS Detecto es operado para cambiar la dirección IP del LG Network Storage.
3. Uso del panel LCD y los botones delanteros 3. U so del panel LCD y los botones delanteros Una vez completado el encendido, la pantalla por defecto de LG Network Storage es como a continuación. *S i se desenchufa el cable LAN, no aparece el ícono de la red ( ) en el panel LCD. Si la conexión de la red es inestable o está en proceso de obtención de la dirección IP, el ícono de la red ( ) puede parpadear.
3. Uso del panel LCD y los botones delanteros Descripción de los íconos ① ② ③ ④ ⑤ ① Este ícono muestra el estado de la conexión con la red. Si el cable LAN está desconectado el ícono no se activa. y parpadea si está conectado. Este ícono también parpadea si la dirección IP ha sido configurada para ser obtenida automáticamente(DHCP) o durante el proceso de obtención de la dirección IP. ② Este ícono se activa cuando el usuario se ha conectado al LG Network Storage abriendo la carpeta de la red.
3. Uso del panel LCD y los botones delanteros Configuración de acciones (Botones ‘←’, ‘→’) Presionando los botones “←” “→” situados en la parte frontal del aparato se puede acceder a diversas funciones del LG Network Storage.
3. Uso del panel LCD y los botones delanteros Modo de Información Este modo mustra el estado actual y las informaciones del LG Network Storage.
3. Uso del panel LCD y los botones delanteros [Capacidad usada del HDD] Muestra la capacidad usada del disco duro en comparación a su capacidad total en porcentaje (%). * Si el volumen no esta configurado aparecerá ‘HDD Config First’. [Fecha y hora] Muestra la fecha y hora programada en LG Network Storage. [Información del RPM del ventilador] Permite verificar la rotación por minuto actual del ventilador del LG Network Storage.
3. Uso del panel LCD y los botones delanteros Modo de configuración de IP La IP del LG Network Storage puede ser configurada usando la tecla Set e ingresando a [IP SETTING MODE]. Usando los botones direccionales se puede navegar a través de los menúes [Configuración manual de IP] – [Configuración automática de IP] – [Volver a la pantalla principal] y activar cada configuración con el botón Set.
3. Uso del panel LCD y los botones delanteros ④ Presionando la tecla direccional derecha hacia el último dígito moverá el cursor al próximo valor a configurar. ⑤ Presione el botón Set. ⑥ Configure el valor mask de la red siguiendo el procedimiento para la configuración de la dirección IP. ⑦ Presione el botón Set. ⑧ Configure la dirección del gateway siguiendo el procedimiento para la configuración de la dirección IP.
3. Uso del panel LCD y los botones delanteros Modo de copia de seguridad USB LG Network Storage provee funciones para guardar fácilmente los datos desde USB, tarjeta de memoria u otros discos removibles a LG Network Storage con un simple click de un botón. Nota: Algunas tarjetas de memoria pueden necesitar adaptadores. (Podrá buscar http:// www.lg.com una lista de tarjetas de memoria compartibles con LG Network Storage.
3.
3. Uso del panel LCD y los botones delanteros Modo de copia de seguridad ODD Crear copias de seguridad en discos usando por LG Network Storage (Copia de seguridad ODD). LG Network Storage provee las funciones para guardar los datos en copias de seguridad en discos ópticos como CD/ DVD/Blu-Ray dentro del LG Network Storage con un simple click de un botón. ① Coloque el disco óptico a crear la copia de seguridad en la unidad BD/DVD del LG Network Storage .
3. Uso del panel LCD y los botones delanteros ⑦ Se puede cancelar la operación presionando el botón ‘←’ en cualquier momento. ⑧ Una vez finalizada la copia de seguridad, aparecerá el siguiente mensaje. [Copia de datos] Esta es una función para hacer la copia de seguridad de los contenidos del disco en el LG Network Storage tal como era originalmente en el disco.
3. Uso del panel LCD y los botones delanteros [Copia de imágenes] Esta función crea una copia de seguridad de los contenidos en formato de archivo de imagen iso. Una vez que se finaliza la copia de seguridad, los datos del usuario son guardados en las subcarpetas creada por los datos de la copia de seguridad dentro de las carpetas /service/Backup/disc-data. Si se ejecuta esta función más de una vez en un día, un número de serie seguirá a la fecha.
3. Uso del panel LCD y los botones delanteros El modo de ahorro de energía apaga todos los servicios de NAS y minimiza la energía usada en todos los sistemas incluyendo el HDD para operar el NAS en el modo de máximo ahorro de energía. En este modo, todos los siguientes íconos desaparecerán. Para volver al modo normal desde el modo de ahorro de energía, presione cualquier botón excepto el botón de encendido. También se puede volver al modo normal si entra a la web e ingresa la contraseña del administrador.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) 4. U so del menú de la web del LG Network Storage (para los administradores de LG Network Storage) Configuración del sistema Network En el menú de configuración de la red, se debe hacer una configuración importante para conectar el LG Network Storage a la red. Si la configuración no se realiza correcamente, aparecerán problemas de conexión en las etapas posteriors por lo que se deben tomar las precauciones.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Anfitrión ① Designe un nombre del anfitrión del LG Network Storage. El nombre de servidor tiene un límite de 12 caracteres, éste puede ser una combinación de letras, de dígitos, de rayas y de guiones; los primeros caracteres deben ser una letra o un número.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ∙ Dirección IP: Ingrese la dirección del IP que desee usar. ∙ Subnet-mask: Ingrese el subnet-mask adecuado para el ambiente actual de la red. ∙ Gateway por defecto: Defina la ruta de salida. Si no existe un gateway en la red, ingrese la dirección IP. ∙ Dirección del servidor DNS por defecto: El servidor DNS maneja las conversiones entre los nombres del dominio y las direcciones IP.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Configuración del tamaño del marco de ethernet] Configura el tamaño de marco de ethernet. Si el tamaño de marco es desconocido, se configura a 1500. * Tamaño del marco de ethernet: Si el tamaño de marco de Ethernet es por lo menos 1500 gigabites, los archivos específicos pueden ser enviados rápida y fácilmente.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Grupo de trabajo /Dominio Configure un grupo de trabajo y los dominios que la red de Windows apoye. Esto permitirá el acceso a la carpeta compartida de la LG Network Storage en Windows. Además de esto, el servicio del dominio de LG Network Storage apoya un directorio activo de Windows, permitiendo la importación de la información de usuario existente, con facilidad y velocidad.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Acceso remoto DDNS (DNS Dinámico) Es posible el uso de DDNS y la conexión del LG Network Storage externamente a trravés del nombre del dominio. (Ejemplo : http://myname.lgnas.com o ftp:// myname.lgnas. com) es posible registrar y conectar la dirección de IP del servidor en el caso de usar un IP fijo, aunque el DDNS permite una conexión conveniente en un ambiente de IP dinámico, donde el IP cambia a tiempo.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [UPnP] El ‘Envío del puerto UpnP’ se usa para recibir directamente por LG Network Storage las solicitudes que entran por el enrutador conectado con el LG Network Storage.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Fecha & Hora Configura la hora del sistema. Para que los archivos cargados en la carpeta de compartimiento muestre la hora exacta y la hora de activación, la hora del sistema debe estar configurada apropiadamente. Configuración de la fecha y de la hora ① Para configurar manualmente la fecha y hora, haga un click en el botón ‘Editar”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Configuración del NTP El Network Time Protocol (NTP) se alinea periódicamente por sísolo con un servidor externo de hora para obtener y sincronizarse con la hora exacto. Esta hora exacta activa continuamente el NTP. Para utilizar el servidor de hora por defecto, tenga en cuenta el servidor de hora pool.net. org.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ② Para usarlo, marque en “Permitido” si no se usa el “No permitido”. Si se marca en “Permitido”, prosiga con los siguientes pasos: ③ Dirección del servidor SMTP: Ingrese la dirección del servidor del mail. Refierase a la página de la información en el servicio de correo del administrador de red e ingrese el valor exacto de ladirección del servidor del SMTP. (ej.: smtp. mail.yahoo. com).
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑧ Activador de la notificación: Configure la información referente al uso periódico del HDD. En caso de que no desee recibir el mensaje periódicamente, la opción puede ser desactivada. ⑨ Tiempo de envío del estado del HDD: Se puede determinar la frecuencia de salida del mail de información del uso de HDD (diario/semanal/mensual).
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Configuración del volumen Para configurar el volumen siga los siguientes pasos. Este procedimiento eliminará todos los datos existentes en el disco duro y no serán recuperados. ① Inicie la sesión en el web y presione sistema -> volumen. ② En la parte superior aparecerá la selección acutal del volumen y una descripción detallada. Si el volumen no está configurado todavía, no aparecerá ninguna descripción.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ④ En el modo ‘RAID 1(Mirroring) + Volumen Lineal (JBOD)’ aparecerá abajo una barra deslizante para seleccionar el tamaño. Mueva esta barra para determinar el tamaño y presione ‘Aplicar’. ⑤ Para usar sólamente un disco seleccione “Disco Individual”. ⑥ En el proceso de configuración del volumen, no se pueden usar los menúes de la web y los botones del frente del aparato.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Agregar disco En caso de usar un solo disco en modo “Disco Individual”, se puede agregar nuevos discos con los siguientes pasos. ① Presione el botón Finalizar en la web, Sistema -> Encender -> Apagar. ② Coloque el segundo disco en el LG Network Storage y encienda el aparato. Para agregar un nuevo disco duro, vea el Capítulo 2 ‘Instalación del LG Network Storage’.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Eliminar disco Eliminar un disco duros en forma forzada sin seguir las funciones de eliminación del disco provistas en esta pantalla puede causar futuras complicaciones con el funcionamiento del sistema y la pérdida de datos importantes del usuario. Por eso, se recomienda que el usuario use el botón de remoción del disco en la web cuando remueva los discos duros.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Trashbox Cuando elimina un archivo o una carpeta cuando la unidad de la red está aún conectado, automáticamente se crea un ‘trashbox’ donde todos los archivos eliminados son transferidos aquí temporariamente. Si desea recuperar los datos eliminados inmediatamente, puede buscar el archivo o la carpeta en el ‘trashbox’ y trasladarlos a la ubicación deseada.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Selective Mirror (Protección de datos selectivos para carpetas) Si usa la función ‘Selective Mirror’, se crean copias de las carpeta seleccionada que permiten la recuperación de datos en caso de pérdida de datos de origen. Agragar lista de ‘Selective Mirror’ ① Active la función ‘Selective Mirror’. ② Si presiona ‘Agregar’ aparecerá una pantalla para aregar una nueva lista.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Editar la lista de ‘Selective Mirror’ ① Marque el item que desee editar y presione el botón ‘Editar’. * Sólo un item por vez puede ser editado. ② Edite la “ruta de origen” y la “ruta de destino” y pulse “Aceptar” para confirmar la configuración editada. Eliminar la lista de ‘Selective Mirror’ ① Marque el ítem que desee eliminar. * Se puede eliminar más de un item al mismo tiempo.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Condiciones ① La carpeta de origen y la carpeta de destino no puede ser la misma carpeta. ② Una carpeta de origen puede tener hasta 4 carpetas de destino. ③U na carpeta designada como una carpeta de origen no puede ser designada como una carpeta de destino en otra configuración. ④U na subcarpeta de una carpeta de origen no puede ser designada como una carpeta de destino.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ① ② Para configurar la función de ahorro de energía, haga click en el botón ‘Editar’. Marque en “Activar” para seleccionar el modo de ahorro de energía, o “Desactivar” para desactivar. Al seleccionar el ` Permitido ‘, proceda al paso siguiente. ③ ④ Configure el tiempo de espera. Si no hay tráfico de datos durante el tiempo dado dentro del LG Network Storage, entrará en modo de ahorro de energía.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Configuración de la energía UPS Un UPS externo es eficaz para los cortes repentinos de la energía. Al conectar un UPS externo con el LG Network Storage, confirme las acciones de la UPS. ① ② Haga click en el botón ‘Editar’ para configurar el UPS. Marque en `Permitido’ para activar el UPS, o el `No permitido’ para desactivar. Al seleccionar en `Permitido’, siga con el próximo paso.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ④ Decida si desea desconectar el UPS después de un intervalo de tiempo designado o cuando el LG Network Storage se apaga debido al corte inesperado de energía. *S i otro dispositivo está conectado con el UPS, por favor no apague el UPS y manténgalo encendido. ⑤ Haga click en el botón de ‘Aplicar’ para incorporar cambios al LG Network Storage. Haga click en el botón ‘Cancelar’ para desechar los cambios.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ④ ⑤ Para guardar la configuración actual, presione “Aplicar”. Cuando llega hora del inicio configurado, el sistema cambiará automáticamente al modo de ahorro máximo de energía y en la pantalla aparecerá el mensaje, “Now Working . . . ⑥ Una vez que el sistema esté totalmente en el modo de ahorro máximo de energía, aparecerá el siguiente mensaje en la pantalla LCD.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Apagado El LG Network Storage puede ser encendido y apagado a través de la web sin ir directamente al LG Network Storage. ① Reiniciar - Termina todas las operaciones actuales y reinicia el LG Network Storage. - Una advertencia aparecerá cuando hace click en el botón y el sistema puede ser reiniciado haciendo un click en el botón de `OK’. - Durante reinicio, el acceso de Internet no estará disponible.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Activar el sistema de forma remota Si el LG Network Storage ha entrado en su modo de ahorro máximo de energía, puede ser activado en forma remota a través del acceso al internet. La pantalla de acceso a través de Internet es un poco diferente a la pantalla de inicio en el modo normal, y sólo el administrador puede utilizar la contraseña para activar el sistema.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Configuración del idioma El menú de la web indica la capacidad de la selección del idioma ① ② Haga click en el botón de Editar para configurar el idioma. Seleccione el idioma deseado entre el idioma coreano, inglés, francés, español y alemán y haga click en el botón “Editar”. *E l idioma de selección será el idioma por defecto usado cuando el usuario acceda por primera vez a la web.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Firmware Se puede modificar la configuración del firmware del LG Network Storage (actualización, inicialización, configuración y copia de seguridad/restauración). Actualización El firmware del sistema del LG Network Storage yl de la unidad Blu-ray / DVD puede ser descargado desde el sitio web del producto y puede ser usado para la actualización.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Actualización del firmware del sistema] ① Verifique la conexión al Internet y descargue el firmware del sistema para el LG Network Storage desde el sitio del producto enlazado a continuación. http://www.lg.com ② Presione el botón “Find” para seleccionar el firmware del sistema a descargar desde el sitio del producto.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Actualización de firmware de la unidad Blu-ray / DVD] ① Verifique la conexión al Internet y descargue el firmware para la unidad Blu-ray / DVD del LG Network Storage desde el sitio del producto enlazado a continuación. ☞ http://www.lg.com ② Seleccione el firmware de la unidad Blu-ray /DVD a descargar desde el sitio del producto. ③ Instale el firmware seleccionado de la unidad Blu-ray / DVD.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) *S e deben tomar las precauciones durante el cambio de las configuraciones ya que después de la inicialización se eliminarán todas las informaciones y los datos del usuario. * La inicialización demorará aproximadamente 10 minutos. Copias de seguridad de la configuración Esta función permite hacer la copia de seguridad/recuperación de las configuraciones de LG Network Storage en un cierto momento.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Guardar las configuraciones a la PC y restaurar] Durante la inicialización del NAS, los archivos de configuración pueden ser guardados en la computadora para una restauración posterior. [Guardar los archivos de configuración a la PC] Elija los archivos de configuración a ser guardadas a la PC y haga click en “Guardar” para guardarlos en la PC.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Administración de compartimiento del LG Network Storage Esta función le permite crear tanto los usuarios y los grupos como carpetas y por lo tanto cambiar las configuraciones para sus autorizaciones de acceso. Usuario Aparecen los usuarios actuales registrados, así que se pueden crear nuevos usuarios y modificar o eliminar las informaciones de los usuarios registrados.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Ingrese la contraseña de usuario. ④ Ingrese la contraseña de usuario otra vez para la confirmación. ⑤ Ingrese el nombre de usuario. ⑥ Se puede agregar la descripción del usuario. ⑦ Ingrese el email del usuario. Si las configuraciones del servidor del mail son correctas, el resultado del registro será enviado a la dirección de email ingresado.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Grupo Se muestran los grupos registrados actualmente. Los grupos pueden ser creados y seliminados, así como la adición o la eliminación de usuarios en los grupos registrados. [Crear a un grupo nuevo] ① Haga click en el botón ` Crear grupo nuevo’. ② Ingrese el nombre de grupo.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Ingrese la descripción del grupo. ④ Seleccione al usuario que debe ser agregado al grupo haciendo click en la caja de verificación correspondiente. Para eliminar a un usuario del grupo, desactive al usuario haciendo click en la caja de verificación nuevamente. ⑤ Luego de seleccionar al usuario, haga click en el botón de ‘salvar’ para crear el grupo.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Carpeta Se muestran las carpetas registradas actualmente. Una carpeta puede ser creada/ cambiada/ eliminada para el compartimiento de archivo y/o el acceso de configuración de la autorización puede ser cambiado para la carpeta creada. [Crear nueva carpeta] ① Haga click en el botón ` Agregar carpeta’. ② Ingrese el nombre de la carpeta compartida.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ③ Ingrese la descripción de la carpeta. ④ Configuree el volumen donde la carpeta será creada si hay más de una. ⑤ Decida si permitirá compartir la carpeta a través de SMB, AFP, FTP o protocolo Webday. - Windows: Activa la carpeta que comparte con protocolo de SMB en Windows/l - AFP (Mac): Activa la carpeta que comparte con AFP en cliente del Mac.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑨ Asigne el usuario/grupo para utilizar la carpeta. Las aplicaciones no asignadas no tienen acceso a la carpeta. * Cuando un directorio está activado al menú ‘red > Grupo de trabajo/dominio’ menu a la izquierda, aparecerán los usuarios y los grupos adicionales.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Blu-ray / DVD La unidad Blu-ray / DVD incorporada permite la copia directa de datos desde los discos al LG Network Storage. Además, la copia de seguridad secundaria de datos usando la unidad de Blu-ray permite una administración más segura y eficiente de los datos. Grabación (Burning) La grabación(burning) de los datos de LG Network Storage al disco es posible usando la unidad de Blu-ray.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ① Mueva la carpeta o el archivo desdeado a la ubicación destinada. ② Seleccione una carpeta o un archivo para grabar y trasládelo a la derecha elaborando una lista de datos de configuración.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ④ Haga click en el botón y confirme que la escritura del disco es posible según lo indicado en la caja del estado del disco. ⑤ Presionando el botón , comienza el proceso de grabación. El proceso de grabación es acompañado por una vista de la barra del progreso. Para cancelar el proceso, haga click en el botón ‘Cancelar’ que aparece con la barra del progreso.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑥ Al final del proceso de grabación, se expulsa la bandeja y el disco puede ser quitado.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Servicio DLNA(Digital Living Network Alliance) DLNA, que significa Digital Living Network Alliance, permite un fácil acceso a los datos de multimedia como música, vídeo o imágenes por PC, disco duro o Televisión Digital a través de la red doméstica. EL DNLA se puede dividir en DMS(digital media server) que envía datos de imágenes, música y película y en DMP(digital media player) que los recive.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ La ruta de origen se refiere a la ubicación de los datos de multimedia que están guardado. Con el fin de utilizar los datos de multimedia a través de DLNA, se debe determinar la ubicación de los datos guardados. Los servicios DLNA sólo serán aplicables a las carpetas DLNA preconfiguradas. ④ Presione el botón “Aplicar” para activar. Para desactivar, marque en “Desactivar” y presione el botón “Aplicar”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Reproducir los contenidos del servidor DNLA en PS3™.] Si enciende el PS3™, se procede una búsqueda automática de servidores para DLNS señalando los resultados con íconos (Fotos) / (Músicas) / (Videos). ① Seleccione el servidor del DLNS para conectar en el menú con los íconos (Fotos) / (Músicas) / (Videos). Se muestran todas las carpetas aplicables que pueden ser reproducidos en PS3™.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Buscar un servidor DLNA manualmente en PS3™.] Se puede buscar manualmente un servidor DLNA dentro de la misma red. Esto puede ser útil cuando el servidor DLNA no aparezca automáticamente después de que PS3™ se haya encendido. En los íconos (Fotos) / (Músicas) / (Videos), seleccione (Búsqueda del Servidor de Multimedia).
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Uso del DLNA como un dispositivo AV] Use los contenidos activando la función DLNA conectado a la red. El procedimiento de configuración puede variar dependiendo del dispositivo conectado. Para las instrucciones detalladas, vea el manual del usuario del dispositivo correspondiente. Servidor de red El acceso al LG Network Storage a través de FTP / FTPs o AFP está configurado con esta función.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) *U sando el servicio DDNS ofrecido por LG Network Storage se conectará a ftp:// myname.lgnas.com: número de puerto. Para más detalles, consulte el sistema de control remoto . *P ara usar el valor del puerto por defecto 21, el usuario puede iniciar la sesión sin introducir el número de puerto a través de la dirección ftp://dirección IP o ftp://myname.lgnas.com.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) *L G Network Storage apoya FTPS con seguridad avanzada en FTP ensistentes para la mejor protección de los datos del usuario que navega a través del Internet. Para utilizar FTPS, se debe usar una programa que soporte a FTP. El programa explorer sopoetado por el sistema operativo Windows no soporta FTPS.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Impresora de red La impresora de red puede ser utilizada conectando la impresora del USB al LG Network Storage. ① Seleccione el “Servicio > Impresora de red” en el menú de la web del administrador. ② Marque en “Permitido”, haga click en el botón “Aplicar”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Usarios del Mac] ① Pulse “ Ir > Utilidades” en el menú de herramienta. ② Haga click en “Utilidad Configuración Impresoras’.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Haga click en ‘Añadir’. ④ Mantenga presionada la tecla “ alt” mientras hace click en en ‘Más impresoras...’.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑤ En la ventana pop-up: i. Seleccione ‘Avanzado’. ii. Seleccione ‘Impresora Windows por SAMBA’.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) iii. Ingrese el URI de la impresora. El nombre de la forma es smb: /dirección IP de LG Network Storage/nombre de impresora El nombre de la impresora puede ser encontrado en el configuración de dispositivo (device config)/ página de la impresora USB. iv. En el modelo de la impresora, seleccione ‘Genérica’ v. Haga click en “Añadir”. * P ulsando la tecla alt mientras hace clidk en ‘Más impresoras...
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) iTunes Es posible el uso de los servicios de iTunes y la recreación de los archivos de música guardados en el LG Network Storage con programas de los iTunes de PC/Mac. La música no afecta al espacio de almacenaje del PC/Mac ya que la transferencia se hace a través del streaming. ① Para el uso requerido, seleccione el `Permitido’ para el servicio de streaming del iTunes.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Máquina del tiempo El servicio de Máquina del Tiempo es la función de copia de seguridad automática incorporada en Mac OS X que permite guardar copia de datos de Mac en LG Network Storage en su última versión. ♣E ste servicio está disponible sólo en Mac OS X versión 10.5 Leopard o versiones posteriores. [Configuración de la web] ① Introduzca el nombre del anfitrión.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ② Ingrese la dirección MAC. La dirección MAC puede ser verificado usando el comando “ifconfig” en “Programas de aplicaciones” -> “Utilidades” -> “Terminal”. Ingrese la dirección “ether” bajo en0.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Mac OS] ① Vaya a “Ir” -> “Conectarse al servidor” y escriba “afp://dirección IP de LG Network Storage” en “Dirección del servidor” y a continuación, haga click en “Conectar”. * La función AFP debe ser activada en la configuración de servidor de red. ② Si aparece la ventana de registro, introduzca el nombre y la contraseña y haga click en “Conectar”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Cuando se abra la ventana del montaje de volumen, seleccione “Timemachine” y presione “OK”. ④ Vaya a “Configuración” -> “Time Mchine” y pulse en “Cambiar disco ...”, seleccione LG Network Storage “Timemachine” y presione “Activar copia de seguridad”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) iSCSI Esto le permite al usuario utilizar la unidad Blu-ray / DVD del LG Network Storage como una unidad de CD. El servicio iSCSI de LG Network Storage permite el acceso y el uso de múltiples usuarios. [Instalación del iSCSI Iniciator] Para poder utilizar el iSCSI, el programa Iniciator debe estar instalado en el ordenador. A. Instalación del programa Iniciator en una PC con Windows.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) C. Instalación del Iniciator en un Mac Instale el iniciador iSCSI Globalsan. Este puede ser descargado desde la página del sitio “studio network solutions”. ☞ Sitio de web http://www.studionetworksolutions.com [Sincronización del servidor] En la página web, haga click en “Permitido” y haga click en “Aplicar”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ② Busque el objetivo iSCSI (LG-NAS). Haga click en el tab ‘Discovery’ en la parte superior del programa Iniciador del iSCSI. Luego haga click en el botón “Add” en la parte inferior. Entonces aparecerá una nueva ventana para agregar Meta Portal (imagen inferior). Introduzca la dirección IP del destino(LG Network Storage).
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Entre a la sesión Vaya al tab ‘Targets’ de la parte superior del programa Iniciador del iSCSI. Si todos estos procedimientos fueron seguidos correctamente, el Iniciador del iSCSI encontrará y listará las informaciones del objetivo(LG-NAS). Seleccione el nombre del destino y pulse el botón “Log On...” y haga click en “OK” en la ventana pop-up.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑥ Salga de la sesión al terminar. Vaya al tab ‘Targets’ en la parte superior del programa Iniciador del iSCSI. Luego, haga click en el botón Details en la parte inferior. Seleccione el nombre de destino y haga click en “Log off. . . “ ※ Debido a problemas de compatibilidad entre Iniciador iSCSI y Windows Vista, el ODD con Windows Vista incorporado puede no estar disponible.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) B. Conexión en una PC con Linux ① Active el iniciador iSCSI. $ /etc/init.d/open-iscsi start ② Encuentre el destino iSCSI. Si la dirección IP del LG NAS(destino) es 192.168.10.2, el objetivo es: $ iscsiadm -m discovery -t sendtargets -p 192.168.10.2 Una vez que se encuentre el objetivo, ejecute el comando anterior, lo cual le mostrará el nombre del destino. El siguiente es un ejemplo: $ 192.168.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Conexión para certificación CHAP] ① Abra el archivo open-iscsi set-up “/etc/iscsi/iscsid.conf” y configure la certificación CHAP. Siga las instrucciones a continuación. (La contraseña de la certificación CHAP debe coincidir con la contraseña creada para el servicio de iSCSI en la página web de LG Network Storage). discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) C. Conexión con un Mac ① Active el iniciador iSCSI. Vaya a System Preference -> globalSAN iSCSI ② Busque el destino iSCSI. Si la dirección IP es 192.168.10.2, vea abajo. Vaya a globalSAN iSCSI -> Portals y pulse “+” y escriba 192.168.10.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Entre a la sesión Vaya a globalSAN iSCSI -> Targets, seleccione los nombres de objetivos correspondientes y haga click en “Log On...”. Luego haga click en “Connect” en la ventana pop-up. ④ Confirme que el objetivo esté conectado de la siguiente manera. Vaya a Utilities -> System Profiler y compruebe que “iSCSI” aparezca en interconexión de “Disc Burning”.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑤ Salga de la sesión al terminar. Vaya a globalSAN iSCSI -> Targets, seleccione los nombres de los objetivos correspondientes y haga click en “Log Off...”. Luego, haga click en “Disconnect” en la ventana pop-up.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Torrent Un programa P2P que comparte archivos que permite descarga simultánea de archivos desde múltiples ubicaciones. Torrent no tiene su propio motor de búsqueda, de modo que el usuario debe obtener un archivo en formato.Torrent, inscribirse en el programa de torrent y descargar el archivo. Para utilizar las funciones de Torrent, el usuario debe “Activar” Torrent desde el menú de servicio.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ⑤ Resume: Reanuda el proceso de descarga del archivo seleccionado que se detuvo temporalmente. ⑥ Pause all: Detiene temporalmente el proceso de descarga de todos los archivos. ⑦ Resume all: Reanuda el proceso de descarga de todos los archivos. ⑧ Filter: Oculta o hace aparecer el filtro. ⑨ Inspector: Oculta o hace aparecer la información del archivo seleccionado.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Sincronización de USB Esta función permite la transferencia de datos entre los dispositivos del USB, las tarjetas de memoria o los dispositivos externos del e-SATA y el LG Network Storage. *Nota: Algunos dispositivos particulares pueden requerir un adaptador. (Para una lista compatible de la tarjeta de memoria, por favor refiérase a la página, http://www.lg.com.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Seleccione el dispositivo para la copia de seguridad y haga click en el botón “Crear”. ④ Se enlistan las opciones específicas para la copia de seguridad. ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑤ Se guarda el nombre de tarea . (generado automáticamente) ⑥ Se especifica la descripción de la información de la tarea. ⑦ Se muestra la identificación única del dispositivo seleccionado.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Se indica la lista de tarea actual y las tareas pueden ser creadas, corregidas, suprimidas o sincronizadas. ① Haciendo click en el botón “Crear” permite crear una nueva tarea. ∙ Si se selecciona el nombre de la tarea, y se hace click en el botón ‘Borrar’, la tarea se suprime. ② Si se hace click en el nombre de tarea de la lista, es posible la edición.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) La copia de seguridad incremental creará una carpeta con la fecha para la copia de seguridad. También crea una copia de seguridad en la carpeta ‘Last Backup’ que contiene todos los archivos del USB. El sistema de estructura de carpetas es como a continuación: `-- USB_LG_XTICK |-- 20090101 | |-- a.txt | |-- b.txt | `-- c.txt `-- lastbackup |-- a.txt |-- b.txt `-- c.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Para la 3° copia de seguridad (enero 3, 2009), el e.txt se ha abierto, modificado y guardado. Sólo el archivo e.txt se guardará en la nueva carpeta. En la carpeta ‘Last Backup’, se guardará todos los archivos del USB, c.txt, d.txt y e.txt. `-- USB_LG_XTICK |-- 20090101 | |-- a.txt | |-- b.txt | `-- c.txt |-- 20090102 | |-- d.txt | `-- e.txt |-- 20090103 | `-- e.txt `-- lastbackup |-- c.txt |-- d.txt `-- e.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Información Esto muestra la red, el volumen, el estado del dispositivo del LG Network Storage y la información acerca del registro del sistema, la conexión de registro y auto-diagnosis. Estado Esto muestra la red, el volumen y los dispositivos externos del LG Network Storage.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Toda la información del disco duro conectado con el LG Network Storage se puede ver por la posición de Bay ④ Se puede ver la información referente a la unidad Blu-ray conectada con el LG Network Storage. ⑤ Se puede ver la información referente a los dispositivos del USB y de la tarjeta de memoria conectados con el LG Network Storage.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Log Se puede ver/guardar el historial del servicio del LG Network Storage. ① ② ③ ④ ⑤ ① Se puede ver el historial del uso del sistema. ② Se puede ver el historial del uso de la carpeta.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) ③ Se puede ver el historial del uso del FTP. ④ El diagnóstico es und y se puede ver el resultado. - El código del servicio para las funciones correctas se muestra como [SVC_CODE: 00_00]. ⑤ El registro del tab seleccionado se puede transferir a la PC del cliente.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Menú superior WebDAV LG Network Storage apoya la función WebDAV que permite arrastrar y soltar, abrir y guardar de modo remoto después de entrar al LG Network Storage desde la web. (“archivos de MS Office” solamente) *C on la función WebDAV, se pueden usar los archivos en LG Network Storage como si estuviera en su PC en conexión con el web.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) [Abrir] ① Seleccione el ícono de WebDAV en la parte superior. ② Vaya a la certificación de usuario. Esta es la misma que la certificación de usuario requerida para acceder a la carpeta de red. ③ Una vez certificado, aparecerá la siguiente pantalla y estarán disponibles las funciones arrastrar, soltar, abrir, editar y guardar . *E sta explicación está sólamente para los usuarios de Windows XP.
4. Uso del menú de la Web del LG Network Storage (para los administradores de LG Network Storage) Mi información ① Haga click en “Mi información” en la esquina superior izquierda. Esto muestra la información del usuario. ② Haga click en el botón “Editar” en la esquina inferior derecha. ③ Introduzca la nueva información, introduzca la contraseña existente en “Contraseña del usuario” y haga click en “Aceptar”.
5. Uso del menú de la tela de LG Network Storage (usuarios regulares) 5. U so del menú de la web de LG Network Storage (usuarios regulares) Blu-ray / DVD La unidad Blu-ray / DVD incorporada permite la copia directa de datos desde los discos al LG Network Storage. Además, la copia de seguridad secundaria de datos usando la unidad de Blu-ray permite una administración más segura y eficiente de los datos.
5. Uso del menú de la tela de LG Network Storage (usuarios regulares) [Funciones de los botones] : Se mueve a la carpeta superior. : Restaura la carpeta actual. : Los archivos o las carpetas seleccionados en la ventana izquierda se envían : Elimina los archivos o carpetas seleccionadas de la lista para grabar en la a la ventana derecha para organizar una lista para la grabación. vetana derecha. ① Mueva la carpeta o el archivo deseado a la ubicación destinada.
5. Uso del menú de la tela de LG Network Storage (usuarios regulares) ② Seleccione una carpeta o un archivo para grabar y trasládelo a la derecha elaborando una lista de datos de configuración. ③ Especifique el nombre del disco en la ventana ‘ Nombre del disco’ ④ Haga click en el botón y confirme que la escritura del disco es posible según lo indicado en la caja del estado del disco.
5. Uso del menú de la tela de LG Network Storage (usuarios regulares) ⑤ Presionando el botón , comienza el proceso de grabación. El proceso de grabación es acompañado por una vista de la barra del progreso. Para cancelar el proceso, haga click en el botón ‘Cancelar’ que aparece con la barra del progreso. ⑥ Al final del proceso de grabación, se expulsa la bandeja y el disco puede ser quitado.
5. Uso del menú de la tela de LG Network Storage (usuarios regulares) Menú superior Mi información ① Haga click en “Mi información” en la esquina superior izquierda. Esto muestra la información del usuario. ② Haga click en el botón “Editar” en la esquina inferior derecha. ③ Introduzca la nueva información, introduzca la contraseña existente en “Contraseña del usuario” y haga click en “Aceptar”.
6. Uso del LG Network Storage vía la impulsión de la red 6. U so del LG Network Storage a través de la unidad de red El servicio de compartimiento de archivos es la función más importante del LG Network Storage. Esta sección pertenece a OS Windows, Mac, Linux que explica en referencia a su uso con la unidad de la red de LG Network Storage. Acceso a los datos de LG Network Storage en OS Windows Para los usuarios de Windows, siga el siguiente procedimiento para tener acceso al LG Network Storage.
6. Uso del LG Network Storage vía la impulsión de la red Uso de la función “Ejecutar” del OS Windows Haciendo click en “Ejecutar “ en el OS Windows se puede comenzar un menú nuevo y se puede acceder al LG Network Storage con el ingreso de la dirección IP. Para la información referente a la dirección IP, vea o .
6. Uso del LG Network Storage vía la impulsión de la red Consejo: Conexión posterior del servidor y configuración de la unidad de la red Si hay una conexión al LG Network Storage, todos las carpetas compartidas están registradas. Si la configuración incluye a la unidad de la red usando “ Tool >Map Network Drive…” , la futura conexión al servidor de la LG Network Storage del LG será más conveniente.
6. Uso del LG Network Storage vía la impulsión de la red * Se puede configurar múltiples carpetas en diferendes unidades de la red de la misma manera.
6. Uso del LG Network Storage vía la impulsión de la red Conexión de OS MAC Los usuarios del MAC pueden conectarse al LG Network Storage a través de las siguientes formas. [Uso de la función del “Conectar el servidor”] El LG Network Storage que comparte la carpeta puede ser agregado a la lista del servidor del Mac en el escritorio. La orden de la conexión es la siguiente. ① Seleccione “Conectarse al servidor” después de hacer click en “ Ir” en la barra de menú.
6. Uso del LG Network Storage vía la impulsión de la red ③ Ingrese el ID de registración y la contraseña y haga click en el botón ‘OK’. Las configuraciones iniciales son: ID: admin, contraseña: admin. Para la seguridad, se aconseja que se cambie la contraseña luego de registrarse en la página web del administrador.
6. Uso del LG Network Storage vía la impulsión de la red ④ Seleccione el volumen a usar (ej: cdrom /service /volume1) en la lista de carpeta del LG Network Storage y haga click en el botón “OK”. ⑤ Se abrirá la carpeta compartida correspondiente y se mostrarán los contenidos.
6. Uso del LG Network Storage vía la impulsión de la red Acceso del OS Linux LG Network Storage provee soporte de OS Windows, MAC y Linux a través del servicio NFS. La conexión del sistema Linux es como a continuación. Se usará la versión Ubuntu como referencia. ① ② Haga click la barra del menú y seleccione `Network’. Haga click en “Red de Windows” y seleccione el “grupo de trabajo” para mostrar el LG Network Storage conectado. Seleccione el nombre del LG Network Storage a conectar.
6. Uso del LG Network Storage vía la impulsión de la red ③ Si se selecciona el LG Network Storage, aparecerá la lista de la carpeta de LG Network Storage. Seleccione el volumen para ser utilizado (ej: BD_Drive o n4b1). ④ Si se ingresa el ID y la contraseña, se permitirá la conexión al LG Network Storage. La información inicial por defecto es ID: admin, contraseña: admin. Para la seguridad, se aconseja cambiar la contraseña luego de registrase a la página web del administrador.
6. Uso del LG Network Storage vía la impulsión de la red ⑤ Después de iniciar la sesión, aparecerá la carpeta compartida del LG Network Storage.
7. Mantenimiento del LG Network Storage 7. M antenimiento del LG Network Storage Esta sección explica sobre el mantenimiento general y autodiagnóstico del LG Network Storage. Apagar/reinicializar el LG Network Storage Los pasos siguientes son para apagar/reiniciar el servidor. ① Informe a todos los usuarios conectados que guarden los archivos y detengan el uso del LG Network Storage. ② Abra la página web del administrador y vaya al tab Sistema;>Energia> Apagado.
7. Mantenimiento del LG Network Storage Contraseña del administrador y la inicialización de la configuración de la red Abra el menú de la red de la administración y vaya al tab de Inicialización del Sistema > Menú de Firmware. Después de la explicación, presione el botón de Inicialización e inicialice los valores del sistema por defecto. Advertencia: En la información y datos de usuario registrados serán eliminados y no podrán ser recuperados.
7. Mantenimiento del LG Network Storage Verificación de la información de sistema y almacenamiento Abra el menú de la web de la administración y vaya al “Log” del menú “Información”, luego verifique y guarde las configuraciones en la ‘System Log’, ‘Samba Log’ y ‘FTP Log’. Ejecución del autodiagnóstico El LG Network Storage, en virtud del modo autodiagnóstico incorporado, ayuda a los usuarios a reconocer y manejar fácilmente los problemas del servidor.
7. Mantenimiento del LG Network Storage ② Incluso en el medio de uso, el administrador puede abrir el menú de la web del administrador y seleccionar el tab “Autodiagnóstico” en el menú “Información> Log” para realizar inmediatamente el autodianóstico del LG Network Storage funciona.
7. Mantenimiento del LG Network Storage Protección de la temperatura del sistema Si la temperatura de HDD dentro del sistema excede los 67 grados centígrados o 153 grados Fahrenheit, el sistema se apaga automáticamente para proteger el hardware.
8. Problemas del RAID 8. Problemas del RAID La configuración del LG Network Storage RAID es anormal cuando aparecen los mensajes de error, por lo tanto recurra a otra solución. Nota: Para evitar obstáculos de los datos, primero haga una copia de reserva de todos los datos importantes del LG Network Storage. 1.
8. Problemas del RAID 2. Soluciones del problema Extrayendo la unidad de disco duro con error y conectando un nuevo disco duro (por ejemplo HDD 2) se mostrará el estado del nuevo disco duro inactiva en la página del sistema/ volumen / agregar o remover HDD. Seleccione el disco duro y haga click en el botón Agregar y se reconfigurará el RAID. Esto eliminará todo el contenido del disco duro. La reconposición del RAID implica sólamente al RAID 1.
8. Problemas del RAID Apéndice A C onstrucción de volumen & configuración de RAID Esta sección describe la configuración de volumen y el nivel del RAID soportado. Cuando se configura el volumen utilizando RAID , se recomienda el uso de discos del mismo fabricante y capacidad para maximizar la estabilidad y la eficacia de la configuración. En el caso que los discos difieran en la capacidad y en la marca, los datos pueden perderse debido a la baja estabilidad y eficiencia del sistema.
8. Problemas del RAID ∙ Volúmenes del espejamiento (Mirroring) Los datos pueden ser copiados exactamente al disco a través esta técnica. Si un disco se daña en volumen, los datos pueden transferirse, salvarse y hacerse la copia de seguridad eficazmente a otro disco configurado. La capacidad de almacenamiento del volumen es igual a la del disco más pequeño en el RAID1, ya que se reproducen los datos de disco a disco. La copia de seguridad de los datos es una prioridad durante el RAID1.
8. Problemas del RAID ∙ Volumen del desglose (striping) del RAID0 Los discos se configuran en paralelo de modo que todos son usados al mismo tiempo para guardar los datos como si fueran un disco en suma. Debido a que los datos son salvados para cada disco en paralelo, muchos archivos de baja capacidad son leídos simultáneamente pero con eficiencia mayor.
8. Problemas del RAID ∙ Volumen lineal JBOD Los discos se configuran en seriepor lo que todos ellos son usados al mismo tiempo para guardar los datos como si fueran un solo disco en suma. La capacidad de almacenamiento del volumen puede maximisarse ya que los datos son guardados en los discos en secuencia. Los datos no deben ser escritos en caso de un disco dañado para salvaguardar la capacidad de almacenamiento. De esta manera, si un disco es dañado, se perderán los datos guardados en el volumen.
8. Problemas del RAID Apéndice B Soporte técnico LG Network Storage provee los soportes exclusivos online y el servicio al cliente por medio del messenger al instante Puede ponerse en contacto a través de las siguientes maneras: - Soporte online: http://www.lgservice.com LG Electronics U.S.A. Inc. 1000 Sylvan Ave. Englewood Cliffs NJ 07632 Ee.UU. o http://www.lgusa.com LG Electronics Deutschland GMBH Jakob-Kaiser-Strae 12, D-47877 Willich, Alemania Goldstar France E.U.R.
8. Problemas del RAID Apéndice C Aviso sobre software de código abierto Los siguientes ejecutables GLP y las librerías LGP usadas en este product están sujetos a los contratos de licencia GPL/LGPL: GPLv2.
8.
8. Problemas del RAID GPLv3.0 : ∙ binutils ∙ gnupg ∙ parted ∙ rsync ∙ samba ∙ wget LGPLv2.1 : ∙ acl ∙ Ajaxplorer ∙ attr ∙ avahi ∙ codepress ∙ confuse ∙ debmapper ∙ dialog ∙ glib2.
8. Problemas del RAID Las ofertas de LG Electronics para proveer el código fuente en el CD-ROM para una carga cubre el costo de realización de cada distribución, tales como el coste de medios, de embarque y de manejo a través de la solicitud de email a LG Electronics en: opensource@lge.com Esta oferta es válida por un período de tres (3) años a partir de la fecha de la distribución de este producto por LG Electronics. Puede obtener una copia de las licencias GPLv2.0, GPLv3.0, LGPLv2.1. en http://www.gnu.
8. Problemas del RAID Este producto utiliza los siguientes software de código abierto. ∙ bind9 : Copyright © 2004-2008 Internet Systems Consortium, Inc. (“ISC”) Copyright © 1996-2003 Internet Software Consortium. Copyright © 1996-2001 Nominum, Inc. ∙ cyrus-sasl2: Copyright © 1998-2003 Carnegie Mellon University ∙ debconf: Copyright © 1999-2006 Joey Hess . ∙ dhcp3: Copyright © Internet Systems Consortium (ISC)
8. Problemas del RAID ∙ Prototype JavaScript framework: Copyright © 2005-2008 Sam Stephenson ∙ Scriptaculous : Copyright © 2005-2008 Thomas Fuchs (http://script.aculo.us, http://mir.aculo.us) ∙ sudo: Copyright © 1994-1996,1998-2005,2007 Todd C. Miller Copyright © 1987, 1989, 1990, 1991, 1993, 1994 The Regents of the University of California ∙ tcp-wrappers: Copyright © 1995 by Wietse Venema ∙ Expat: copyright © 2006 expat maintainers.
8. Problemas del RAID Apéndice D Lista de dispositivo compatible/recomendado Para ver la última lista de dispositivos compatibles/ recomendados, por favor visite http://www.lg.com. Recomendación para la lista del disco duro Lo que sigue es una lista de discos duros posiblemente compatibles con el LG Network Storage. Se recomiendan los siguientes discos duros.