User Guide and Instruction Manual LG Network Storage N2B1 / N2R1
Safety warning Safety warning Note 1 2 3 4 Do not place any objects within 15cm of the unit. The unit reaches high temperatures creating the risk of burn injuries. Only use compatible devices with the system ports, or the system and devices risk being damaged. Do not use damaged disks. Product can be damaged. Do not dismantle or change the structure of the system in any way. This may cause electric shock. When dealing with system components, strictly abide by the instruction manual.
Safety warning Related to damage to the HDD and data: - during installation or disconnection of the system, ensure that the system does not experience any external physical shocks. - During the operation of the HDD, short surges and stoppages of power may cause the system to turn off and on quickly. - there may be a sudden stoppage of electricity during operation - avoid moving the system during operation of the HDD, which may cause 8 external physical shock - during the configuration of new volumes.
Safety warning Warning 1 2 3 4 5 6 7 8 Do not use damaged electrical cords. This may cause electric shock, and is a fire hazard. Use a grounded cord and grounded socket to avoid electric shock and damage to components. Do not handle the electrical cord with wet hands, as this may cause shock and injury. When removing the plug from the socket, ensure that the plug is handled and not the cord. Otherwise this may cause damage to the plug and even fire.
Safety warning In the event of dropping the system, contact the service centre for advice and 15 possible service. Not doing this creates the risk of damage, fire and electric shock. 16 17 18 Keep the system away from direct sunlight to avoid overheating, and melting of the case, which may eventuate in fire and injury.
Contents Contents Safety warning...................................................... 2 1. Introduction.....................................................10 LG Network Storage Introduction.........................................10 Supported OS...................................................................11 Package Contents.............................................................12 Name of Each Part.............................................................13 2.
Contents 4. L G Network Storage Web Menu Use (for LG Network Storage administrators).....................................46 System Settings.................................................................46 Network.................................................................................. 46 Host.................................................................................................47 Interface...........................................................................................
Contents LG Network Storage Share Management...............................76 User....................................................................................... 76 Group..................................................................................... 78 Folder.................................................................................... 80 Blu-ray / DVD...................................................................82 Burning.........................................................
Contents 5. L G Network Storage web menu usage (Regular users)............................................... 127 Blu-ray / DVD................................................................. 127 Burning..................................................................................127 Top menu ...................................................................... 131 My Information........................................................................131 6. LG Network Storage via network drive..
1. Introduction 1. Introduction LG Network Storage Introduction Thank you for purchasing the LG Network Storage. 1) Now the LG Network Storage basic data-save and share functions can be used in Windows, Mac and Linux operating systems. 2) Similarly, the internal Blu-ray / DVD rewriter can be used to efficiently save data securely for long periods. 3) Furthermore, the Blu-ray / DVD drive can be used when directly copying data from discs to LG Network Storage.
1. Introduction 4) The LG Network Storage also allows for mobile synchronization, without the use of a PC, as mobile devices can be directly synchronized to the LG Network Storage. This user manual contains express installation information as well as detailed options and functions. Supported OS LG Network Storage ∙ Windows XP, Server 2003, Vista ∙ Mac OS 10.x or later ∙ Linux (Redhat, Suse, Ubuntu) PC S/W PC S/W Supported OS NAS Detector Windows XP, Server 2003, Vista, Mac OS 10.
1. Introduction Package Contents ∙ LG Network Storage ∙ Product warranty ∙ ‘LG Network Storage PC Software Installer’ ∙ Quick install guide Quick install guide LG Network Storage N2B1 / N2R1 ∙ Power cord and adaptor ∙ LAN cable ∙ Hard disk fastening screw (x8) – enclosure only * Photographs of images from the manual may differ depending on model components.
1. Introduction Name of Each Part ② ⑤ ⑥ ⑦ ⑧ ③ ④ ① ② ① ⑨ ⑪ ③ ④ ⑦ ⑤ ⑩ ⑥ ① USB port: USB 2.0 interface ② LAN port: LAN cable connection. ③ e-SATA: External SATA II device support ④ DC jack: Power adaptor connection ⑤ Fan ⑥ Kensington lock: Antitheft lock ⑦ Adaptor cable holder: Prevents the adaptor cable from unplugging. ① Power button: power on, off (to turn off power, hold button in for 3 seconds without release). ② SET (S) button: selects mode.
2. LG Network Storage Installation 2. LG Network Storage Installation Follow these instructions to install the LG Network Storage. If the LG Network Storage is internal, go to , otherwise go to Hard disk installation and setup The LG Network Storage hard disk rack is shown below. Refer to each part while installing the HDDs. Components of Hard Disk Rack Hard Disk Rack Lever Hard Disk Rack Lock Button Hard Disk Rack Label No.
2. LG Network Storage Installation ① First, ensure that the power is off. ② Open the front cover of the LG Network Storage main system. ③ Unlock the hard disk rack by pushing the lock button upward. ④ Hold down the hard disk rack lever and pull the hard disk rack to separate it from the main system. ⑤ Insert the hard disk into the hard disk rack, and with a screw driver, screw the four screws into place. * If the Hard disk has been in use, all the data on it will be lost.
2. LG Network Storage Installation ⑥ Match the hard disk rack label number and the LG Network Storage front panel number, to insert the hard disk rack into the slot. ⑦ Push the hard disk rack into the LG Network Storage main system until it makes a click.
2. LG Network Storage Installation ⑧ To prevent accidental detachment of the hard disk rack, push down the lock button. ⑨ Similarly repeat the installation procedure for all the hard disks, one by one.
2. LG Network Storage Installation ‘LG Network Storage Installer’ installation (LG Network Storage system file installation,volume and RAID configuration) ① Connect the enclosed power adaptor to the DC jack. Plug the “power cord” into an electrical outlet. Once the power adaptor is connected to the DC jack, connect the power cord to the outlet. ② While holding down both ‘<-‘ and ‘->’ buttons, press the POWER button once. Once the “Enclosure_Mode” message pops up, let go of the arrow buttons.
2. LG Network Storage Installation ④ System loads system files as it reboots. LG Network Storage shall not be accessed during the system reboot process. ⑤ After approximately 60 seconds, system reboot is completed with a light alarm sound. (In the case that network connection has been activated) ⑥ All basic installation required for running the LG Network Storage has been completed.
2. LG Network Storage Installation LG Network Storage Connection In an environment with a DHCP server, selecting automatic IP search after connecting the LG Network Storage to the IP router/switch/hub will acquire the network information from the DHCP server. For a particular IP address allocated from the Network IP administrator, installation using an IP address, subnet mask, default gateway and allocated DNS information is simple.
2. LG Network Storage Installation * If the LG Network Storage is directly connected to the PC through a LAN cable, the PC’s local internet will not be accessed In this case, PC Internet may be disconnected. ② After checking that the LG Network Storage power cable has been connected, press the power button in the front to activate the LG Network Storage.
2.
2. LG Network Storage Installation PC application program installation ① Insert the “LG Network Storage PC Software Installer” CD in the PC’s optical drive (CD/DVD/BD drives). After a short while, the following menu will appear. * Installation on PCs without a fiber optic drive may be processed using the iSCSI function of LG Network Storage. Please refer to 4 Service – iSCSI. 그림 2-19 ② Flash Player Installation is required to fully utilize the LG Network Storage web menu.
2. LG Network Storage Installation PC Application Program Usage This explains how to use “NAS Detector” For a detailed explanation for the bundle program, please refer to the built-in manual after installing the program. (Comnso back-up/Photo DVD Album/CyberLink group) <”NAS Detector” usage> ① After checking that the PC network is intact, double click the “NAS Detector” icon on the desk top to open the program.
2. LG Network Storage Installation * If the desired LG Network Storage is not found, click again on the ‘Search Network’ button to restart the search. If the search on the ‘NAS Detector’ is unsuccessful, re-check the Network connection. For manual setup see section .
2. LG Network Storage Installation ④ ‘Change Network Info’ can be selected to change the IP address. The DHCP selection option appears if a router is used or if there is a DHCP server on the network. * I f no IP address is allocated, use the IP address “NAS Detector” or check the DHCP option and automatically assign an IP address ⑤ If the ‘Open Web Menu’ button is clicked, the web menu of the selected LG Network Storage can be accessed.
2. LG Network Storage Installation ⑥ If the ‘Open Network Folder’ button is clicked, the LG Network Storage network folder can be accessed. ⑦ In selecting “Open Web Menu” or “Open Network Folder”, a pop up message appears with “Yes”, which when selected will produce a shortcut icon on the desk top, and after which the LG Network Storage web menu and network folder can be easily accessed.
2. LG Network Storage Installation < Using the LG Network Storage web menu > The web menu offers LG Network Storage management features such as Network Information, Share management, and Service management. It also offers menus to setup data storing using Blu-ray/DVD drives and synchronized storage of mobile devices. ① ② Double click on the LG Network Storage web menu shortcut button. The LG Network Storage web menu can be used, after inputting user ID and password.
2. LG Network Storage Installation File share and store can be performed, similar to the internal or external HDDs connected to the PC. ① Double click the LG Network Storage network folder shortcut. ② The LG Network Storage Blu-ray/DVD drive under folder name “cdrom” and “service” / “volume” will appear.
2. LG Network Storage Installation The NAS Monitor offers various functions for the user to easily utilize the LG Network Storage. For example, user can access the network folder or web pages by simply clicking the MAS Monitor menu. The NAS Monitor basically obtains an IP address through automatic connection with LG Network Storage. This allows the user to easily access the network folder or the web even after a change of IP address without changing the settings.
2. LG Network Storage Installation Web menu is used to access the web page. Network folder is used to open the network folder. Double-clicking the left button of the mouse will open the network folder. This is used to log on to the FTP server. The NAS Detector program is run to change the IP address of the LG Network Storage. This menu will properly function only after the NAS Detector has been completely installed.
3. LCD panel and front button usage 3. LCD panel and front button usage Once the booting is complete, the default LG Network Storage screen will be as follows. * I f the LAN cable is unplugged, the network icon ( ) will not appear on the LCD window. If the network connection is unstable or in the middle of acquiring the IP address, the network icon ( ) may blink.
3. LCD panel and front button usage Icon Description ① ② ③ ④ ⑤ ① Icon shows the status of the network connection. It is deactivated if the LAN cable is disconnected and blinking if connected. The icon will also blink if the IP address has been set up to be acquired automatically (DHCP) or in the process of acquiring IP address. ② Icon is activated when user has logged on to LG Network Storage by opening the network folder. ③ Icon is activated when the memory card/USB/e-SATA devices are connected.
3. LCD panel and front button usage Action set-up (‘←’, ‘→’ buttons) Pressing the ‘←’, ‘→’ buttons in the front will allow access to various functions of LG Network Storage. Action modes activated by using the arrow keys are as follows: Action modes comprises 6 modes of [Stand-by Screen] – [Information Mode] – [IP Setting Mode] – [USB Back-Up Mode] – [ODD Back-Up Mode] – [Hibernation Mode] in order and user may navigate through the modes by using either ‘←’ or ‘→’ button.
3. LCD panel and front button usage Information Mode Information Mode shows the current status and information of LG Network Storage. Once in the [Information Mode], user may use the arrow keys to move through [IP Address Information] – [System Firmware Version] – [HDD Usage Capacity] – [Date and Time] – [Fan RPM Information]. [IP Address Information] Mode allows user to check the IP address set up.
3. LCD panel and front button usage [HDD Usage Capacity] This shows the hard disk’s used-up capacity in comparison to its total capacity in percentage (%). * If the volume is not configured in advance, ‘HDD Config First’ will appear. [Date and Time Information] This shows the current date and time set up in the LG Network Storage. [FAN RPM Information] This allows to check the current Fan rotation per minute of LG Network Storage.
3. LCD panel and front button usage IP SETTING MODE The LG Network Storage IP can be set up by using the Set key and entering [IP SETTING MODE]. The arrow keys may be used to navigate through menus [Manual IP set-up] – [Automatic IP set-up] – [Return to stand-by screen], and the Set key may be used to enter any of the menus. [1] Static IP G [2] D HCP IP G [3] C ancel Se tup G For Manual IP set-up, please follow the following orders: ① Press the Set button once [1] Static IP appears.
3. LCD panel and front button usage ④ Pressing the right arrow key from the last digit will move the cursor to the next setup value. ⑤ Press the Set key. ⑥ Set up the network mask value following the procedure for the IP address set-up. ⑦ Press the Set key. ⑧ Set up the gateway address following the procedure for the IP address set-up.
3. LCD panel and front button usage USB Back-up Mode LG Network Storage provides functions to easily store data from USB, memory card, or other removable disks to the LG Network Storage with a simple click of a button. Note: Certain memory cards may require an adaptor. (A list of memory cards compatible with LG Network Storage may be found on http://www.lge.com. LG Network Storage may not function properly if a memory card, not listed on the website, is to be used.
3. LCD panel and front button usage Folder names will be set up automatically as follows: Saved in Folder name Service/back-up/ Manufacture company name_Serial No./ File back-up USB format /Date folder created ※ I n the case of simple back-ups, if one storage device is backed up several times, the data from the final back-up will be saved under the Last Backup folder. If one device is backed up more than once on one day, a serial number will follow the date.
3. LCD panel and front button usage ODD Backup Mode Backup data on discs using LG Network Storage (ODD Backup) LG Network Storage provides functions to back up data saved in optic disks such as CD/DVD/Blu-Ray on to LG Network Storage with a simple click of a button. ① Insert the optic disk to be backed up in the LG Network Storage BD/DVD drive. ② Once the system reads the optic disk, the optic disk type will appear in the front of the LCD.
3. LCD panel and front button usage ⑦ Pressing ‘←’ button will cancel the job at any time. ⑧ Once back-up is completed, the following message will pop up: [Data Copy] This is a function to back up the content of the disk on to LG Network Storage just as it was originally in the disk. Selecting the Data Copy function will back up user’s data in subfolders created by back-up date under service/back-up/disc-data folders.
3. LCD panel and front button usage [Image Copy] This backs up contents in the disk in iso image file formats. Once back-up is complete, user’s data is saved in subfolders created by back-up date under service/back-up/disc-image folders. If back-up takes place more than once on one day, a serial number will follow the date.
3. LCD panel and front button usage Hibernation Mode Hibernation Mode shuts down all services of NAS and minimizes the energy used in the overall system including the HDD to run NAS in maximum energy save mode. In the maximum energy save mode, all of the above icons will disappear. To change from the Hibernation Mode to normal mode, press any one of the keys except the Power button. Logging on to the webpage and entering the administrator’s password will also change the setting to normal mode.
3. LCD panel and front button usage Tray open / close (DISC OPEN button) Pressing the “DISC OPEN” button in the bottom front will open the tray on which the disc can be placed. Pressing the “DISC OPEN” button or softly pushing the tray when the tray is open will close the tray.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) 4. L G Network Storage Web Menu Use (for LG Network Storage administrators) System Settings Network In the Network setting menu, an important set-up needs to be made to connect the LG Network Storage to the network. If the set up is not performed correctly, connection problems will arise at later stages, hence care must be taken.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Host ① Designate an LG Network Storage host name. The server name has a limit of 12 characters, this can be a combination of letters, digits, underscores and hyphens; the first characters though must be a letter or a number. Names permitted: LG-NAS, LGNAS-123 Names not permitted: LG_NAS, -LGNAS,123-LG, LG-#, LG/N ② Type in host description.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ∙ IP address: Enter desired IP address. ∙ Subnet Mask: Enter the subnet mask that suits the current network environment. ∙ Default Gateway: Define the outgoing route. If no gateway exists on the network, enter the IP address. ∙ Default DNS server address: The DNS handles conversions between domain names and IP addresses. If the DNS is not correctly configured, e-mails, DDNSs or domains will not function normally.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Ethernet Frame Size Set-up] Configure ethernet frame size. If frame size is unknown, set it to 1500. * Ethernet Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified files can be sent quickly and with ease. In this case, the LG Network Storage alone does not change, but so do the PC and home router/router/hub/switch frame sizes. Otherwise performance will be reduced.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Workgroup/Domain Set up a workgroup and domains that the Windows network supports. This will allow for access to the LG Network Storage shared folder in Windows. In addition to this, the LG Network Storage domain service supports a Windows Active Directory, enabling the import of existing user information, with ease and speed.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Remote Access DDNS (Dynamic DNS) Using DDNS and connecting the LG Network Storage externally by domain name is possible. (Example: http://myname.lgnas.com or ftp://myname.lgnas.com). To record and connect the server IP address to the in the case of using a fixed IP is possible, though the DDNS allows for a convenient connection in a dynamic IP environment, where IP changes in time.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [UPnP] The UPnP port forwarding is used for LG Network Storage to directly receive requests from the router connected to the LG Network Storage.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Date & Time Set up the system time. In order for the files uploaded in the shared folder to display the accurate time and log times, the system time should be properly set up. Date and Time Setup ① To manually set the date and time, click on the ‘Edit’ button. Use ‘standard time zone’ to designate the current local region for LG Network Storage.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) NTP Set-up The Network Time Protocol (NTP) periodically aligns itself with an external time server to obtain and synchronize itself with accurate time. This accurate time should continuously activate the NTP. To use the Default Time Server, refer to pool.ntp.org server time. Mail Notification To use Mail Notification, the LG Network Storage usage amount can be periodically checked.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② To use it check ‘Enable’ if ‘Disable’ is not used. If ‘Enable’ is checked, proceed with the following steps: ③ SMTP Server Address: Input the Mail Server address. Refer to the information page in the network administrator Mail Service, and input the accurate SMTP Server Address value. (e.g. smtp.mail.yahoo.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Volume Set-up In order for data to be saved on to LG Network Storage, volume must be set up. If the volume is configured the hard disk icon will appear on the far right side of the LCD in the front, but if the volume is not configured, the disk icon does not appear and the network drive connection, USB back-up, ODD back-up among other functions will not be available.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② On the top are the current volume array and a detailed description. If the volume has not yet been configured, there will not be any detailed description. ③ The “new volume configuration” menu under “change volume configuration” below comprises “RAID 1 (striping)”, “RAID 1 for important data (mirroring)”, “linear (JBOD) volume”, “RAID 1 (mirroring) + linear (JBOD) volume”, and single disks (disk 1, disk 2).
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑦ If either “RAID 1 (mirroring)” or “RAID 1 (mirroring) + linear (JBOD)” is selected, the synchronization progress for the RAID 1 portion may be viewed on the web screen. Add disk In the case that “single disks” is being used, new disks may be added by following the below procedures. ① Press the End button in the web, system → power → end. ② Insert the second disk in the LG Network Storage and turn the power on.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Remove disk Forced removal of the hard disk without following the remove disk functions provided in this screen may cause future complications with system performance and loss of user’s important data. Therefore, it is strongly recommended that user uses the remove disk button on the web when removing hard disks. In the case that “single disks” is being used, existing disks may be removed by following the below procedures.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Trahsbox Removing a file or folder when the network drive is still connected creates a trashbox and all deleted files are temporarily moved here. If user were to recover the deleted data, user may find the file or folder from the trashbox and move them to the intended location. However, trashbox is created for each highest level folder and there will be as many trashboxes as the number of user’s folders.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Selective Mirror (Selective data protection for folders) The Selective Mirror function automatically generates copies of certain folders, which allows data recovery even after the loss of source data. Add Selective Mirror List ① Choose Selective Mirror activation. ② Pressing the add button will move the screen to add a new list.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Edit Selective Mirror List ① Checkbox the item to be edited and press the ‘edit’ button. * Only one item can be edited at a time. ② Edit the “source path” and the “destination path” and press “OK” to confirm the edited set-up. Delete Selective Mirror List ① Checkbox the item to be deleted. * More than one item at a time can be deleted. ② Press the “delete” button to confirm the deleted set-up.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Conditions ① The source folder and the destination folder cannot be the same folder. ② One source folder may have up to 4 destination folders. ③A folder designated as a source folder cannot be designated as a destination folder in another setting. ④ A subfolder of a source folder cannot be designated a destination folder. ⑤A folder designated as a destination folder cannot be designated as a source folder in another setting.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Hibernation Setup This allows all LG Network Storage hard disks to transition into stand-by to minimize energy consumption after a certain period of no data transfer. Reading or writing LG Network Storage data during the hibernation mode will gradually reactivate the LG Network Storage hard disks and fully activate after 3-15 seconds.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) UPS Power Setting An external UPS is effective for sudden power stoppages. When connecting an external UPS to the LG Network Storage, confirm the actions of the UPS. ① ② Click on the ‘Edit’ button to configure UPS. Check ‘Enable’ to activate UPS, or ‘Disable’ to deactivate. When selecting ‘Enable’, proceed to the next step. * LG Network Storage supports APC Style USB UPS only.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ④ Decide whether to maintain UPS power when LG Network Storage shuts down due to unexpected power cut. * I f another device is connected to UPS, Please do not turn off UPS but keep the power on. ⑤ Click on the ‘Apply’ button to enter changes to the LG Network Storage. Click on the ‘Cancel’ button to discard changes.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Once it reaches the beginning time set up, the system automatically transitions into max energy save mode and on the LCD will appear a message, “Now Working. . .” ⑥ Once the system is fully in max energy save mode, the following message will appear on the LCD. At this stage, it is no longer possible to connect the network drive and various functions provided by LG Network Storage will be unavailable.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Shutdown Do not go directly to the LG Network Storage, as LG Network Storage can be turned on and shut down via the web. ① Restart - Ends all current operations and restarts the LG Network Storage. - A warning will appear when clicking the button, and the system can be restarted by clicking on the ‘OK’ button. - During restart web access is not available.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Activating the System Remotely Once LG Network Storage has entered its max energy save mode, it can be activated through remote internet access. The screen accessible through the internet is slightly different from the log –in screen in the normal mode, and only the administrator can use the password to activate the system. Synchronization may take approximately a minute.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Language Setting The web menu indicates a language selection capability. ① ② Click on the ‘Edit’ button to set language. Select a desired language out of Korean, English, French, Spanish, and German and click on the ‘Apply’ button. *T he language of selection will be the default language used when the user first accesses the web.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Firmware LG Network Storage firmware settings can be changed (Upgrade, Initialization, Configuration and Backup/Restore). Upgrade LG Network Storage system and Blu-ray/DVD Driver firmware can be downloaded from the product web site, and can be used for upgrading.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [System Firmware Upgrade] ① Verify connection to the Internet and download system firmware for the LG Network Storage from the product site linked below. ☞ http://www.lge.com ② Press the “find” button to select the system firmware downloaded from the product site. ③ Press the “upgrade” button to Install the selected system firmware to LG Network Storage. The upgrade progress may be viewed on the LCD in the front.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Blu-ray/DVD Drive Firmware Upgrade] ① Verify connection to the Internet and download the firmware for the Blu-ray/DVD drive attached to the LG Network Storage from the product site linked below. ☞ http://www.lge.com ② Select the Blu-ray/DVD drive firmware downloaded from the product site. ③ Install selected Blu-ray/DVD drive firmware.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Configuration Back-up This allows the back-up/recovery of settings for LG Network Storage at a certain time. Network settings (host name, IP address, workgroup), time setting (date/time, NTP), mail notification service setting, share administration (user, group, folder security), service setting values may be backed up but user data requires separate back-up. [Backup] Save the current user configuration.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Save Settings to PC and Restore] During initialization of NAS, configuration files can be saved to PC for later restoration. [Save Configuration Files to PC ] Choose configuration files to be saved to PC and click on the ‘Save’ button to save them to PC. [Restore NAS User Settings Saved on PC] NAS settings can be restored using configuration files saved on the PC. 1.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) LG Network Storage Share Management This function allows you to create users and groups as well as folders, and hence change settings for their access authorization. User Current registered users appear, so new users can be created and registered user information can be modified or deleted. [Create User] ① Click on the ‘Create User’ button. ② Enter user ID. User ID cannot be overlapped.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter user password. ④ Enter user password again for confirmation. ⑤ Enter user’s name. ⑥ User description can be added. ⑦ Enter user e-mail As long as mail server settings are correct, the registration result will be sent to he entered e-mail address. For details concerning mail server settings, refer to .
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Group Current registered groups are displayed. Groups can be created and deleted, as well as the addition or removal of users in registered groups. [Creating a New Group] ① Click on the ‘Create New Group’ button. ② Enter group name.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter group description. ④ Select user to be added to the group by clicking on the corresponding checkbox. To remove a user from the group, deselect the user by clicking on the the checkbox again. ⑤ When user selection is done, click on the ‘Save’ button to create the group. [Editing Groups] By clicking on the ‘Group Name’ link in the registered group list, group attributes can be altered.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Folder Current registered folders are displayed. A folder can be created/changed/deleted for file sharing and/or authorization settings access changed to the created folder. [Create New Folder] ① Click on the ‘Add Folder’ button. ② Enter the shared folder name.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter folder description. ④ Set the volume where the folder will be created if there is more than one. ⑤ Decide whether to permit folder sharing through SMB, AFP, FTP or Webday protocol. - Windows: Activates folder sharing through SMB protocol on Windows/Mac/ - AFP (Mac): Activates folder sharing through AFP on Mac client. - FTP: Activates folder sharing through FTP.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Blu-ray / DVD The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient. Burning Burning the LG Network Storage data to disc is possible using the Blu-ray/DVD drive. Burn Disc Burning LG Network Storage files to disc is possible. [Button functions] : Moves to upper folder.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the button begins the burning process. The burning process is accompanied by a progress bar display. To cancel the process, click on the ‘Cancel’ button, which appears with the progress bar.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ At the end of the burning process, the tray ejects and the disc can be removed.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Service DLNA(Digital Living Network Alliance) DLNA, which stands for Digital Living Network Alliance, allows sharing multimedia data such as music, video, or images saved in other devices through connecting digital devices such PC, hard disks, or digital TVs through the home network. DLNA comprises DMS (Digital Media Server), which sends images, music and movie data, and DMP (Digital Media Player), which receives data.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ The source path refers to the location the multimedia data is currently saved. In order to utilize the multimedia data through DLNA, locations of the saved data must be determined. DLNA service will only be applicable to pre-set DLNA source folders. ④ To activate, please press the “apply” button. To deactivate, please select “Do not apply” and press the “apply” button.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Playing DLNA server contents on PS3™] Once PS3™ is turned on, the DLNA server within the network will automatically be searched and the found server icon will appear on ( images) / (music) / ( images) / (music) / (video). ① Select the DLNA server icon for log-in from (video) of the home menu. All applicable folders and files supported by PS3™ will be displayed. ② Select the file to play.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Manually search DLNA server in PS3™] DLNA server within the same network may be manually located. This may be useful when DLNA server does not appear automatically after PS3™ has been turned on. Select (Media server search) from (images) / (music) / (video). Results should appear and returning to home menu will list available DLNA server.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Using DLNA as AV Device] Use contents by activating the DLNA function connected to the network. Set-up procedure may vary depending on connected device. For detailed instructions, refer to the relevant device user manual. Network Server Access to the LG Network Storage through FTP/FTPs or AFP is configured with this function. *F or router use, the router settings need to be changed.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) *U sing the DDNS service offered by LG Network Storage will log on to ftp:// myname.lgnas.com:port number. For more details, please refer to system remote control . *T o use the default port value 21, user may log on without inputting the port number through ftp://IP address or ftp://myname.lgnas.com. ② Input the user name and password and login ③ Look at the sharing folder.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) *L G Network Storage supports FTPS with advanced security on the existing FTP for better protection of the user’s data traveling through the internet. To use FTPS, an FTP connection program that supports FTPS must be used. The explorer program supported by the Windows operating system does not support FTPS. Generally most commercial FTP connection programs support FTPS and more details may be found in the relevant program manual.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Network Printer The network printer can be used by connecting the USB printer to the LG Network Storage. ① Select Service > Network Printer from the administrator’s web menu. ② Check “Enable”, click the “Apply” button. [Windows users] ① In the web menu go to “Enable” to connect the network printer, after which an LG Network Storage printer icon appears.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac users] ① Click on Go/ Utilities in the tool menu. ② Click on the Printer Setup Utility.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Click on Add. ④ Hold the alt key down while clicking on More Printers.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ In the pop up window: i. Select Advanced. ii. Select Windows Printer via SAMBA.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) iii. Input the printer URI. The form name is smb: /LG Network Storage IP/printer. The printer name can be found in the Device Configuration(device config)/ USB Printer page. iv. In Printer Model, select Generic. v. Click Add. * B y pressing the alt key while clicking on More Printers, a range of printers can be seen. There are no other options. vi. The printer appears in the printer list. Now the printer is ready for use.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① For required use, select ‘Enable’ for iTunes Streaming Service. ② Set Music Library Update Frequency. - Forced update (manual): Activate once the music file service for Streaming to begin the service. To create a music file, time is needed hence manual updates are recommended.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Time Machine The Time Machine service is the automatic back-up function built in Mac OS X and allows the Mac data copies to be stored in LG Network Storage in their latest version. ♣T his service is available in only Mac OS X version 10.5 Leopard or later versions. [Web Set-up] ① Enter the host name. The host name is the local host name after deleting “.local” found under “System Environment Set-up” → “Shared” → “Edit”.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② Enter the MAC address. The Mac address can be found by going to “Application Programs” → “Utilities” → “Terminal” and running the “ifconfig” command. Enter the “ether” address under en0. ③ Select “enable” and press “apply”.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac OS] ① Go to “Move” → “Connect to Server” and enter “afp://LG Network Storage IP address” under “Server Address”, then click “Connect”. * The AFP function must already be activated under network server settings. ② If the log-in window appears, enter the name and password and click “Connect”. Enter “admin” for name and the administrator’s password for password.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ When the mount volume window opens, select “Timemachine” and press the “OK” button. ④ Go to “Settings” → “Time Machine”, press “Change disk…”, select LG Network Storage “Timemachine” and press “Enable as back-up”. ⑤ When the log-in window appears again, repeat instruction (2) and the Time Machine will be “On” and back-up begins in LG Network Storage.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) iSCSI This allows for the user to use the LG Network Storage Blue-ray/DVD drive as a CD drive. The LG Network Storage iSCSI service allows multiple users’ log-in and usage. [iSCSI Initiator Installation] In order to use the iSCSI, the Initiator program must be installed in the computer A.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Initiator Installation on a Mac Install the globalsan iSCSI initiator. This can be downloaded from the “studio network solutions” homepage. ☞ Website http://www.studionetworksolutions.com [Server Synchronization] On the webpage, click “Enable” and then click “Apply”. Once the iSCSI is activated, certain functions such as web burning will be limited. [iSCSI Connection] A.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ② Find the iSCSI target (LG-NAS). Click on the Discover tap on the top of the iSCSI Initiator program. Then click the “Add” button on the bottom. Then a new window to Add Target Portal (picture below) should appear. Enter the target (LG Network Storage) IP address.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the above procedures have been followed properly, the iSCSI Initiator will find and list the information for the target (LG-NAS). Select the relevant target name and press the “Log On . . .” and click “OK” from the pop-up window. ④ Check that the target has been connected as follows.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ Log out when done. Go to the Targets tab on the top of the iSCSI Initiator program. Then click on the Details button on the bottom. Select the relevant Target Name and click “Log Off. . . “ ※ Due to compatibility issues between iSCSI Initiator and Windows Vista, the Windows Vista built-in ODD record functions, mastered or live file system, may not be available.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) B. Connection on a Linux PC ① Activate the iSCSI initiator. $ /etc/init.d/open-iscsi start ② Find the iSCSI target. If the LG NAS (target)’s IP address is 192.168.10.2, the target is: $ iscsiadm -m discovery -t sendtargets -p 192.168.10.2 Once target is found, execute the above command, which will display the target name. The following is an example: $ 192.168.10.2:3260,1 iqn.2009-01.com.lge:LG-NAS.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Connection for CHAP certification] ① Open the open-iscsi set-up file “/etc/iscsi/iscsid.conf”and set up the CHAP certification. Follow the below instructions. (The CHAP certificate password must match the password set up for the iSCSI service on the LG Network Storage webpage.) discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.username = inAdmin discovery.sendtargets.auth.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Connection on a Mac ① Activate iSCSI initiator. Go to System Preferences -> globalSAN iSCSIㄴ ② Find the iSCSI target. If the IP address is 192.168.10.2, see below. Go to globalSAN iSCSI -> Portals and press “+” and enter 192.168.10.2 and press “OK”.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to globalSAN iSCSI -> Targets, select the relevant target name and click “Log On. . . .” and then “Connect” on the pop-up window. ④ Confirm that the target is connected as follows. Go to Utilities -> System Profiler and check that “iSCSI” appears under “Disc Burning” interconnect. Tools such as Disc Utility/Finder can be used to utilize the NAS built-in ODD.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Log out when done. Go to globalSAN iSCSI -> Targets, select the relevant target name and click “Log Off. . . .” and then “Disconnect” on the pop-up window. * Notes Because the LG Network Storage Blue-ray drive network connection allows any logged-in user to use the program, it is important that other users are not interrupted.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Torrent A P2P file sharing program that allows simultaneous download of files from multiple locations, Torrent does not have its own search engine, so user must obtain a file in format .torrent, register to the torrent program and download the file. To use the Torrent function, user must “Enable” the Torrent from the service menu. Click on the Torrent icon on the top and open the Torrent program administration window.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑧ Filter: Hides or unhides the filter item. ⑨ Inspector: Hides or unhides the information for the selected file. [Set-up] ① Click on the set-up icon. ② Select Preferences and set up the port to be used, transfer speed limit, etc.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) USB Sync This function enables data transfer between USB devices, memory cards or external e-SATA devices and the LG Network Storage. *Note: Some particular devices may require an adapter. (For a compatible memory card list, please refer to the homepage, http://www.lge.com. Use of an incompatible device may cause malfunction of the LG Network Storage.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑤ The task name is saved. (automatically generated) ⑥ The task information description is specified. ⑦ The selected device’s unique ID is displayed. ID specific to the manufacturer information, product information, etc, are displayed. ⑧ The port with the device is displayed. ⑨ Each time the USB is plugged the USB is automatically recognized and back-up begins according to the settings.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) The current task list is indicated and tasks may be created, edited, deleted or synched. ① Clicking on the ‘Create’ button allows for a new task to be created. ∙ If the task name is selected, and the ‘Delete’ button is clicked, the task is deleted. ② If the list task name is clicked, editing is possible.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) The Incremental back-up will create a folder for the back-up date with the above files. It also creates a Last Backup folder containing all of the files in the USB. The system folder structure is as follows: `-- USB_LG_XTICK |-- 20090101 | |-- a.txt | |-- b.txt | `-- c.txt `-- lastbackup |-- a.txt |-- b.txt `-- c.txt For the 2nd back-up (Jan 2, 2009), a.txt and b.txt had been deleted and d.txt and e.txt had been added. c.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) For the 3rd back0up (Jan 3, 2009), e.txt has been opened, modified and saved. Only e.txt file will be saved in the new folder. In the Last Backup folder, all files in the current USB, c.txt, d.txt and e.txt, will be saved as is. `-- USB_LG_XTICK |-- 20090101 | |-- a.txt | |-- b.txt | `-- c.txt |-- 20090102 | |-- d.txt | `-- e.txt |-- 20090103 | `-- e.txt `-- lastbackup |-- c.txt |-- d.txt `-- e.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Information This shows network, volume, device status of the LG Network Storage and information about system log, connection log and self-diagnosis. Status Status of the LG Network Storage Network, Volume and external devices can be viewed. For more specific details or to make changes, clicking on the icons on the bottom will direct the users to the relevant webpage.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ All hard disk information connected to the LG Network Storage can be viewed by Bay position ④ The information pertaining to the Blu-ray drive connected to the LG Network Storage can be viewed. ⑤ The information pertaining to the USB device and memory card connected to the LG Network Storage can be viewed. ⑥ The information pertaining to the e-SATA device connected to the LG Network Storage canbe viewed.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Log The LG Network Storage service history can be displayed/saved. ① ② ③ ④ ⑤ ① The system use history can be viewed. ② The share folder use history can be viewed.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ The FTP use history can be viewed. ④ The diagnosis is und and the result can be viewed - The service code for proper functions is displayed as [SVC_ CODE: 00_00]. ⑤ Selected tab log can be downloaded to the client PC.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Top menu WebDAV LG Network Storage supports the WebDAV function which allows to remotely drag and drop, open and save functions after logging on to LG Network Storage from the web. (“MS Office file” only) *T he WebDAV function will allow the user logged in through the webpage to access files in the LG Network Storage as if they were files in the user’s PC.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ① Select the WebDAV icon on the top. ② Go through user certification. This is the same as the user certification required for network folder access. ③ Once certified, the following screen will pop up and file drag and drop, open, edit and save functions will be made possible. *T his information is for Windows XP users only. Other OS users should refer to the information found online.
4. LG Network Storage Web Menu Use (for LG Network Storage administrators) My Information ① Click the “My information” button on the left top corner. This displays the user information. ② Click on the “Edit” button on the right bottom corner. ③ Enter the modified information, enter the existing password in “User password” and click on “OK”. *T o change the password, enter the existing password in “User password” and enter the new password in “New password” and “Confirm new password”.
5. LG Network Storage web menu usage (Regular users) 5. LG Network Storage web menu usage (Regular users) Blu-ray / DVD The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient. Burning Burning the LG Network Storage data to disc is possible using the Blu-ray/DVD drive. Burn Disc Burning LG Network Storage files to disc is possible.
5. LG Network Storage web menu usage (Regular users) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list.
5. LG Network Storage web menu usage (Regular users) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the button begins the burning process. The burning process is accompanied by a progress bar display. To cancel the process, click on the ‘Cancel’ button, which appears with the progress bar.
5. LG Network Storage web menu usage (Regular users) ⑥ At the end of the burning process, the tray ejects and the disc can be removed.
5. LG Network Storage web menu usage (Regular users) Top menu My Information ① Click the “My information” button on the left top corner. This displays the user information. ② Click on the “Edit” button on the right bottom corner. ③ Enter the modified information, enter the existing password in “User password” and click on “OK”. *T o change the password, enter the existing password in “User password” and enter the new password in “New password” and “Confirm new password”.
6. LG Network Storage via network drive 6. LG Network Storage via network drive The file sharing service is the most important function in LG Network Storage. This section pertains to Windows, Mac, Linux OS, which are explained in reference to their use with the LG Network Storage network drive. Accessing the LG Network Storage data in Windows OS For Windows users, observe the following procedure to access the LG Network Storage.
6. LG Network Storage via network drive Windows OS “Execute” function use Clicking on “Execute” in the Windows OS can start a new menu with inputting the \\IP Address to the LG Network Storage can be accessed. If IP address is unknown, refer to
6. LG Network Storage via network drive Tip) Post server connection, network drive set-up If there is a connection to the LG Network Storage, all sharing folders are registered. If settings involve the network drive using the “Tools > Map Network Drive…”, future connection to the LG Network Storage server becomes more convenient.
6. LG Network Storage via network drive * Multiple folders can be set up in different network drives in the same way.
6. LG Network Storage via network drive MAC OS connection MAC users can connect to the LG Network Storage by methods such as explained below. [“Server connect” function use] The LG Network Storage sharing folder can be added to the Mac server list on the desk top. The connection order is as follows. ① ② Select “Connect to server” after clicking on “Go” at menu bar.
6. LG Network Storage via network drive ③ Input the log in ID and password and click on the ‘OK’ button. The initial settings are as follows: ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
6. LG Network Storage via network drive ④ Select the volume to be used (e.g. cdrom/service/volume1) in the LG Network Storage folder list and click “OK”. ⑤ The relevant shared folder will open and the contents displayed.
6. LG Network Storage via network drive Linux OS access LG Network Storage supports Windows, MAC, and Linux OS, through the SMB service. The Linux system connection is as follows. Ubuntu will be used as a reference. ① ② Click on the menu bar and then select ‘network’. Click on “Windows Network” and select “workgroup” to display the LG Network Storage connected. Select the name of the LG Network Storage to connect to.
6. LG Network Storage via network drive ③ Selecting LG Network Storage will display the folder list of LG Network Storage. Select the volume to be used (e.g. cdrom/service/volume1). ④ If the ID and passwords are inputted then connection to the LG Network Storage is allowed. Initial default information is ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
6. LG Network Storage via network drive ⑤ After logging in, the LG Network Storage share folder appears.
7. LG Network Storage Maintenance 7. LG Network Storage Maintenance This section explains about general LG Network Storage maintenance and selfdiagnosis. LG Network Storage shut down/restart The following steps pertain to server shut down/restart. ① Inform all connected users to save files in operation and stop use of the LG Network Storage. ② Open the administrator web page, and go to the ‘System > Power > Shutdown’ tab.
7. LG Network Storage Maintenance Administrator password and network set up initialization Open the administration web menu and go to the ‘Initialization’ tab of the ‘System > Firmware’ menu. Following the explanation, push the ‘Initialization’ button and initialize the default system values. Warning: As this time all registered user information and data will be deleted, and cannot be recovered.
7. LG Network Storage Maintenance System information checking and saving Open the administration web menu and go to the ‘Log’ of the ‘Information’ menu then check and save settings in ‘System Log’, ‘Samba Log’ and ‘FTP Log’. Self-diagnosis execution The LG Network Storage, by virtue of built in self-diagnosis mode, helps users easily recognize and handle problems arising on the server. * The volume must first be constructed before running self-diagnosis.
7. LG Network Storage Maintenance System failure or malfunction If the LG Network Storage does not display SVC_CODE[00_00] which verifies normal status and seems to have encountered a problem after running a ‘Self-diagnosis’ on the administrator web as stated above in section 7.4, follow the steps below. ① For technician’s reference, write down the error code appearing on the LCD ‘[SVC_CODE xx_yy] and make a record on tasks done before the accident and messages you witnessed.
. RAID trouble shooting . RAID trouble shooting The LG Network Storage RAID configuration is abnormal when error messages appear, hence resort to another solution: Note: To avoid data obstacles, first perform a back-up of all important data from the LG Network Storage. 1. RAID configuration error checkup ∙ Confirm whether there is an error on the RAID configuration: ① On the Status Information/Volume page, the volume configuration state will show as ”degraded/destroyed”.
8. RAID trouble shooting 2. Problem solutions Removing the HDD with the error and connecting a new hard drive (e.g. HDD 2) will display the new hard disk status to be inactive on the system/volume/add or remove HDD page. Select the hard disk and click the Add button and RAID will reconfigure. This will delete all contents of the new hard disk. RAID reconstruction entails to RAID 1 only.
8. RAID trouble shooting Appendix A Volume Construction & RAID Configuration This section describes volume configuration and supported RAID level. When configuring volume using RAID, the use of Disks of the same manufacturer and capacity is recommended to maximize stability and efficiency of configuration. In the case that the Disks differ in capacity and trademark, data may be lost due to low system stability and efficiency.
8. RAID trouble shooting ∙ Mirroring volumes Data can be exactly replicated to the Disk through this technique. If one Disk becomes damaged in the volume, data can be efficiently transferred, saved and backed up to another configured Disk. The volume’s storage capacity is equal to that of the smallest Disk in the RAID1, as the data is reproduced from Disk to Disk. The data backup is a priority during RAID1. The saving of important data is recommended.
8. RAID trouble shooting ∙ RAID0 striping volume The Disks are configured in parallel so that they are all being used at once to store data, as if they were one Disk in summation. Because the data is saved to each Disk in parallel, many files of low capacity are read simultaneously but with superior efficiency. Many low capacity files are read because multiple blocks of data are stored to each Disk, though the performance is excellent at this time.
8. RAID trouble shooting ∙ JBOD Linear volume The Disks are configured in series so that they are all being used at once to store data, as if they were one Disk in summation. The volume’s storage capacity can be maximized, as the data is stored to the Disks in sequence. Data must not be written in the event of a damaged Disk to safeguard saving capacity. In this way, if a Disk is damaged, saved date in the volume will be lost.
8. RAID trouble shooting Appendix B Technical Support LG Network Storage provides dedicated online support and customer service via instant messenger. You can contact us by the following means: -. Online Support : http://www.lgservice.com LG Electronics U.S.A. Inc, 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A or http://www.lgusa.com LG Electronics Deutschland GMBH Jakob-Kaiser-Strae 12, D-47877 Willich, Germany Goldstar France E.U.R.L Paris Nord II 22, Avenue des Nations-B.P.
8. RAID trouble shooting Appendix C Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL/LGPL License Agreements: GPLv2.
8.
8. RAID trouble shooting GPLv3.0 : ∙ binutils ∙ gnupg ∙ parted ∙ rsync ∙ samba ∙ wget LGPLv2.1 : ∙ acl ∙ Ajaxplorer ∙ attr ∙ avahi ∙ codepress ∙ confuse ∙ debmapper ∙ dialog ∙ glib2.
8. RAID trouble shooting LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.com This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics. You can obtain a copy of the GPLv2.0, GPLv3.0, LGPLv2.1 licenses from http://www.gnu.org/licenses/old-licenses/gpl-2.0.
8. RAID trouble shooting This product includes other open source software. ∙ bind9 : Copyright © 2004-2008 Internet Systems Consortium, Inc. (“ISC”) Copyright © 1996-2003 Internet Software Consortium. Copyright © 1996-2001 Nominum, Inc. ∙ cyrus-sasl2: Copyright © 1998-2003 Carnegie Mellon University ∙ debconf: Copyright © 1999-2006 Joey Hess . ∙ dhcp3: Copyright © Internet Systems Consortium (ISC)
8. RAID trouble shooting ∙ Prototype JavaScript framework: Copyright © 2005-2008 Sam Stephenson ∙ Scriptaculous : Copyright © 2005-2008 Thomas Fuchs (http://script.aculo.us, http://mir.aculo.us) ∙ sudo: Copyright © 1994-1996,1998-2005,2007 Todd C. Miller Copyright © 1987, 1989, 1990, 1991, 1993, 1994 The Regents of the University of California ∙ tcp-wrappers: Copyright © 1995 by Wietse Venema ∙ Expat: copyright © 2006 expat maintainers.
8. RAID trouble shooting Appendix D Compatible/Recommended Device List For the latest compatible/recommended device list, please visit http://www.lge.com. Recommendation hard disk list The following is a list of hard disks possibly compatible with the LG Network Storage. The following hard disks are recommended. In the case of using hard disks not recommended by LG Electronics, malfunctions in the LG Network Storage can occur. For updated hard disk recommendations, go to the link http://www.lge.com.