ENGLISH OWNER’S MANUAL DIGITAL SIGNAGE MEDIA PLAYER (Hardware) Please read this manual carefully before operating your set and retain it for future reference. DIGITAL SIGNAGE MEDIA PLAYER NC1000 NC1100 NA1000 NA1100 NC2000 NC2100 NA2000 NA2100 www.lgsupersign.com www.lgsolutions.
CONTENTS NC1000 Specifications.....................................................................................................4 General Specifications................................................................................................... 4 Multi I/O Port.................................................................................................................. 4 Operational Specifications.............................................................................................
NC1100/NA1000/NA1100 Specifications...................................................................................................20 General Specifications................................................................................................. 20 Multi I/O Port................................................................................................................ 20 Operational Specifications...........................................................................................
NC1000 Specifications Attention NC1000 General Specifications ● Product specifications may change without prior notice to improve performance. Dimensions 250 mm (W) x 220 mm (H) x 45 mm (D) (only Set) Weight 1.43 kg (only Set) CPU Intel ATOM Processor 330 1.
NC1000 Included in the Box Basic Components The NC1000 with the following components. Please check that these components have been included prior to installation. NC1000 NC1000 User Manual / Cards Box Guide Power Cable RS-232C Cable Rail x 2 Handle x 2 (for attachment of handle) M3, L8 x 8 M3, L12 x 4 (for attachment of Box Guide on the monitor) Attention ● These illustrations may differ from your product and are subject to change.
NC1000 Connections Back Panel D C B F G M E E NC1000 A H Number I J K E L Connection Description A Power Cable In For the power cable. B Power Switch Provides power to the NC1000. C RS-232C Out For the RS-232C cable. D USB Wireless Modem In For a USB-type wireless modem. E USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. F HDMI Out For an HDMI-compatible monitor. G LAN Connector For a LAN cable.
NC1000 Installation We recommend you to use the items provided with your NC1000 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention The illustrations shown are to guide your integration and may differ from your product. Place the handle into the slots on the side of the product. 2 Use screws to secure the handle. 3 Place the rail in the slots on the side of the product.
NC1000 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor. 5 Attach the Box Guide to the rail slots, and press it upward. 6 Use screws to secure the player and the Box Guide as shown below.
NC1000 In/Out Cable Connection In order to watch video on a monitor, you need to use a D-sub cable or an HDMI cable to connect the NC1000 to a monitor. Attention Note When using the SuperSign Manager software: ● The monitor SET ID is a unique number used to identify the monitor. You can choose a number from 1 to 25. The SET ID allows the SuperSign Manager software to identify the monitor. ● In order to directly connect the monitor to NC1000, its SET ID must be set to 1.
NC1000 In/Out Cable Connection Connect the D-sub port of NC1000 and RGB-IN port of the monitor with a D-sub cable. 3 Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable.
NC1000 In/Out Cable Connection Connect the NC1000 to the monitor with a LINE-OUT cable. 5 Connect a LAN cable to the NC1000.
NC1000 In/Out Cable Connection Connecting a Monitor with an HDMI Cable HDMI connections allow digital video and audio signals to be transferred with one cable. HDMI cable connections do not require an additional audio in cable. NC1000 Attention 12 ● The monitor to connect with NC1000 should have the HDMI in for the HDMI connection. ● To use the HDMI device, you need to activate the HDMI device in Microsoft Windows Embedded Standard, the operating system of the NC1000.
NC1000 In/Out Cable Connection Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable. 4 Connect a LAN cable to NC1000.
NC1000 Connecting/Disconnecting HDMI Audio Device in Windows Connecting HDMI Audio Device NC1000 Move to the desktop of the monitor connected to the NC1000. 1 Click the button in the lower left of the screen. 2 Select Start > Control Panel > Sounds and Audio Devices > Audio. 3 Select Play Sounds > NVIDIA High Definition Audio from the list and click OK. Disconnecting HDMI Audio Device Move to the desktop of the monitor connected to the NC1000.
NC1000 Connection to Multiple Monitors Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25) You can set the tile mode by connecting multiple monitors. Connect the NC1000's D-sub OUT to the D-sub IN of the first monitor, which has SET ID = 1. 2 Connect other monitors with D-sub cables as shown below (IN/OUT separated). 3 Connect the NC1000's RS-232C OUT to the RS-232C IN of the first monitor, which has SET ID = 1.
NC2000 Specifications Attention NC2000 General Specifications ● Product specifications may change without prior notice to improve performance. Dimensions 99.8 mm (W) x 183.3 mm (H) x 28.4 mm (D) (only Set) Weight 0.215 kg (only Set) CPU Intel ATOM Processor 330 1.
NC2000 Included in the Box Basic Components The NC2000 consists of the following components. Please check that these components have been included prior to installation. NC2000 NC2000 User Manual / Cards screw x 2 Attention ● These illustrations may differ from your product and are subject to change. Attention The NC2000-**A*/**B* model, as shown in the image, is compatible with the following models.
NC2000 Connections Back Panel B D C C NC2000 A Number 18 Connection Description A HDMI Out For an HDMI-compatible monitor. B LAN Connector For a LAN cable. C USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. D PCI MINI EXPRESS Card Slot Provided for PCI Mini Express Cards.
NC2000 Installation We recommend you to use the items provided with your NC2000 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention The illustrations shown are to guide your integration and may differ from your product. Remove the screw and Metal cover. 2 Attach the Box Guide to the rail slots, and press it upward. NC2000 1 Note If card does not become fully inserted into the insertion direction.
NC1100/NA1000/NA1100 Specifications Attention General Specifications NC1100/NA1000/ NA1100 Dimensions Weight CPU Chip Set Main Memory Secondary Storage Device O/S ● Product specifications may change without prior notice to improve performance. 250 mm (W) x 220 mm (H) x 45 mm (D) (only Set) SSD 1.590 kg (only Set) HDD 1860 g (only Set) NC1100 Intel Celeron Processor P4500 (2M Cache, 1.86 GHz) NA1000 Intel Core™ i7-620M Processor (4M Cache, 2.66 GHz) NA1100 Intel Core™ i5-520M Processor (3M Cache, 2.
NC1100/NA1000/NA1100 Included in the Box Basic Components The NC1100/NA1000/NA1100 with the following components. Please check that these components have been included prior to installation. User Manual / Cards Box Guide Power Cable RS-232C Cable Rail x 2 Handle x 2 (for attachment of handle) M3, L8 x 8 NC1100/NA1000/ NA1100 NC1100/NA1000/NA1100 M3, L12 x 4 (for attachment of Box Guide on the monitor) Attention ● These illustrations may differ from your product and are subject to change.
NC1100/NA1000/NA1100 Connections Back Panel A NC1100/NA1000/ NA1100 B D E F G P/W MIC IN DP H Number 22 C I J E L K Connection Description A Power Cable In For the power cable. B RS-232C Out For the RS-232C cable. C Power Button Turns the power on for NC1100/NA1000/NA1100's. D LINE-OUT Connector For a LINE-OUT cable for analog audio transfer. E USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse.
NC1100/NA1000/NA1100 Installation We recommend you to use the items provided with your NC1100/NA1000/NA1100 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention The illustrations shown are to guide your integration and may differ from your product. Place the handle into the slots on the side of the product. 2 Use screws to secure the handle. 3 Place the rail in the slots on the side of the product.
NC1100/NA1000/NA1100 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor. 5 Attach the Box Guide to the rail slots, and press it upward. 6 Use screws to secure the player and the Box Guide as shown below.
NC1100/NA1000/NA1100 In/Out Cable Connection To view images on the monitor, you need to connect NC1100/NA1000/NA1100 to the monitor via a D-SUB, HDMI or DP cable. Attention Note When using the SuperSign Manager software: ● The monitor SET ID is a unique number used to identify the monitor. You can choose a number from 1 to 25. The SET ID allows the SuperSign Manager software to identify the monitor. ● In order to directly connect the monitor to NC1100/NA1000/NA1100, its SET ID must be set to 1.
P/W P/W MIC IN DP NC1100/NA1000/NA1100 MIC IN DP In/Out Cable Connection Connect the D-sub port of NC1100/NA1000/NA1100 and RGB-IN port of the monitor with a D-sub cable. NC1100/NA1000/ NA1100 2 P/W MIC IN DP P/W MIC IN DP P/W P/W MIC IN DP MIC IN DP 3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable.
P/W MIC IN DP MIC IN DP NC1100/NA1000/NA1100 P/W In/Out Cable Connection MIC IN DP 4 Connect the NC1100/NA1000/NA1100 to the monitor with a LINE-OUT cable. NC1100/NA1000/ NA1100 P/W MIC IN DP P/W P/W MIC IN DP MIC IN DP P/W MIC IN DP 5 Connect a LAN cable to the NC1100/NA1000/NA1100.
P/W NC1100/NA1000/NA1100 MIC IN DP In/Out Cable Connection Connecting a Monitor with an HDMI Cable HDMI connections allow digital video and audio signals to be transferred with one cable. HDMI cable connections do not require an additional audio in cable. NC1100/NA1000/ NA1100 Attention ● The monitor to connect with NC1100/NA1000/NA1100 should have the HDMI in for the HDMI connection.
DP P/W MIC IN DP NC1100/NA1000/NA1100 In/Out Cable Connection P/W MIC IN DP 3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable. NC1100/NA1000/ NA1100 P/W P/W MIC IN DP MIC IN DP P/W MIC IN DP 4 Connect a LAN cable to NC1100/NA1000/NA1100.
NC1100/NA1000/NA1100 Connecting/Disconnecting HDMI Audio Device in Windows Connecting HDMI Audio Device NC1100/NA1000/ NA1100 Move to the desktop of the monitor connected to the NC1100/NA1000/NA1100. 1 Click the button in the lower left of the screen. 2 Select Start > Control Panel > Sounds and Audio Devices > Audio. 3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.
NC1100/NA1000/NA1100 P/W MIC IN Connecting a Monitor with DP Cable DP Attention 1 Connect the appropriate power cables to a monitor and NC1100/NA1000/NA1100 respectively. P/W MIC IN DP NC1100/NA1000/ NA1100 To enable DP connection, the monitor that will be connected to NC1100/NA1000/NA1100 must support the DP input port. P/W MIC IN DP P/W P/W DP MIC IN 1 MIC IN DP Connect NC1100/NA1000/NA1100 to the monitor via a DP cable.
MIC IN DP P/W NC1100/NA1000/NA1100 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable. NC1100/NA1000/ NA1100 3 MIC IN DP P/W P/W MIC IN DP MIC IN DP P/W MIC IN DP P/W MIC IN DP 4 Connect the NC1100/NA1000/NA1100 to the monitor with a LINE-OUT cable.
NC1100/NA1000/NA1100 P/W MIC IN DP 5 Connect a LAN cable to NC1100/NA1000/NA1100. P/W MIC IN DP NC1100/NA1000/ NA1100 P/W DP MIC IN P/W Attention DP MIC IN ● NC1100/NA1000/NA1100 prioritizes video output in the following order: RGB → DP → HDMI. If you connect multiple cables simultaneously and turn the product on, video output is prioritized accordingly.
NC1100/NA1000/NA1100 Connection to Multiple Monitors NC1100/NA1000/ NA1100 Each NC1100/NA1000/NA1100 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25) 1 Connect the NC1100/NA1000/NA1100's D-sub OUT to the D-sub IN of the first monitor, which has SET ID = 1. 2 Connect other monitors with D-sub cables as shown below (IN/OUT separated). NC1100/ NA1000/ NA1100 3 Connect the NC1100/NA1000/NA1100's RS-232C OUT to the RS-232C IN of the first monitor, which has SET ID = 1.
NC2100/NA2000/NA2100 Specifications Attention General Specifications ● Product specifications may change without prior notice to improve performance. 99 mm (W) x 179 mm (H) x 28.5 mm (D) (only Set) Weight CPU(NC2100) CPU(NA2000) CPU(NA2100) Chip Set 0.288 kg (only Set) Intel® Celeron® Processor P4500 (2M Cache, 1.86 GHz) Intel® Core™ i7-620M Processor (4M Cache, 2.66 GHz) Intel® Core™ i5-520M Processor (3M Cache, 2.
NC2100/NA2000/NA2100 Included in the Box Basic Components NC2100/NA2000/ NA2100 The NC2100/NA2000/NA2100 consists of the following components. Please check that these components have been included prior to installation. NC2100/NA2000/NA2100 User Manual / Cards screw x 2 Attention These illustrations may differ from your product and are subject to change. Attention The NC2100/NA2000/NA2100 model is compatible with the following models.
NC2100/NA2000/NA2100 Connections Back Panel A B C NC2100/NA2000/ NA2100 D Number Connection Description A USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. B HDMI Out For an HDMI-compatible monitor. C LAN Connector For a LAN cable. D PCI MINI EXPRESS Card Slot Provided for PCI Mini Express Cards.
NC2100/NA2000/NA2100 Installation We recommend you to use the items provided with your NC2100/NA2000/NA2100 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention NC2100/NA2000/ NA2100 The illustrations shown are to guide your integration and may differ from your product. 1 Remove the screw and Metal cover. 2 Attach the Box Guide to the rail slots, and press it upward.
Appendix Limitations of Microsoft Windows Embedded Standard The following are potential errors that may occur due to internal limitations of Microsoft Windows Embedded Standard, which is the OS of SuperSign Player. ● If you press Alt + Enter on the DOS window, text other than English may be shown corrupted. ● If you use Save As function in the Print window, the menu window name will be displayed in English.
Make sure to read the Important Precautions before using the product. Keep the User’s Guide(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.