ENGLISH OWNER’S MANUAL Sound Bar Please read this manual carefully before operating your set and retain it for future reference. NB2030A www.lg.com NB2030A-N0.DUSALLK.130108.
1 Getting Started 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 11. Only use attachments/accessories specified by the manufacturer. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
1 Getting Started Getting Started FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Table of Contents 5 Table of Contents 1 1 Getting Started 3 Operating 2 6 6 6 7 8 8 9 9 Safety Information Accessories Introduction – Symbols Used in this Manual Remote control Top panel Rear panel Installing the sound bar Installing the cover foot 12 12 12 12 12 12 13 14 Operations – DRC (Dynamic Range Control) – AV Sync – AUTO POWER DOWN – AUTO POWER On/Off – Turn off the sound temporarily – LG Sound Sync Controlling a TV with the Supplied Remote Control 2 Connecting 4 Troubleshooting 10 11
Getting Started Accessories Introduction Please check and identify the supplied accessories. Symbols Used in this Manual 1 Getting Started ,,Note Indicates special notes and operating features. >>Caution Remote control (1) Batteries (1) Wall Mount Bracket Installation Template (1) Wall mount bracket (2) Optical cable (1) Cover foot (2) Indicates cautions for preventing possible damages from abuse. Cable ties for arranging cables(2) NB2030A-N0.DUSALLK.130108.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power): Switches the unit ON or OFF. DRC (ON/ OFF) : Sets the DRC. • • • • • • • • • • b • • • • • • • • • • VOL -/+ : Adjusts speaker volume. AV SYNC -/+ : Synchronizes the audio and video. ,,Note 1 Getting Started : Mutes the sound.
Getting Started Top panel 1 Getting Started A 1 (Standby/On) B – / + (Volume) Adjusts speaker volume. Rear panel A Software Download Connector - Only for service. NB2030A-N0.DUSALLK.130108.
Getting Started Installing the sound bar Installing the cover foot You can hear the sound by using optical cable connect the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can extend the height of the unit. 9 1 Getting Started Place the unit in front of the TV and connect it to the device. (Refer to page11) 1. Turn the unit upside down. 2. Peel off a sticker attached to the cover foot. Then place it on the existing foot of the unit. 3.
Getting Started Mounting the main unit on a wall 1 Getting Started You can mount the main unit on a wall. Prepare screws and brackets. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill holes. A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill. Wall Mount Brac ket Installation Unit Wall Mount Bracket Installation Template Template Wall mount bracket ,,Note 1.
2 Connecting Connecting 3. Remove the Wall Mount Bracket Installation Template. 11 ,,Note Detach the unit from the bracket as shown below. 4. Fix the brackets with screws (not supplied) as shown in the illustration below. 2 Connecting Optional Equipment Connection OPTICAL In connection 5. Hang the main unit onto the bracket as shown below. Connect an optical output of external devices to the OPTICAL IN connector.
Operating Operations DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down (Dolby Digital only). Set to DRC by pressing DRC ON. To cancel DRC, press DRC OFF. AV Sync 3 When receiving audio signals from TV, sound and images may not match. In that case, this function can adjust the delay time. Operating Use AV SYNC -/+ to scroll up and down through the delay amount, which you can set between 0 and 300 ms.
Operating LG Sound Sync 13 With wired connection 1. Connect your LG TV to the unit by using an optical digital cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Optical digital cable Controllable function by LG TV's remote control : Volume up/down, mute. Refer to the TV's instruction manual for the details of LG Sound Sync.
Operating Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. (LG TV only.) 3 Operating Button Operation MUTE Turn the TV’s volume on or off INPUT Switch the TV’s input source between the TV and other input sources. 1 (TV POWER) Turn the TV on or off. VOL +/– Adjust the volume of the TV. PR/CH w/s Scan up or down through memorized channels.
Troubleshooting 15 Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power No sound Check the condition by operating other electronic devices. Check the OPTICAL IN connection. The remote control is too far from the unit. The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. Remove the obstacle. The battery in the remote control is exhausted. Replace the batteries with new one.
Appendix Trademarks and Licenses Maintenance Handling the Unit When shipping the unit Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Manufactured under license under U.S.
Appendix 17 Specifications General Power requirements AC 120 V, 60 Hz Power consumption 11 W Dimensions (W x H x D) 899.2 mm x 58.4 mm x 83.8 mm (35.4 inches x 2.3 inches x 3.3 inches) Net Weight (Approx.) 2.6 kg (5.7 lbs) Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 1 Amplifier Stereo mode 20 W + 20 W (6 Ω at 1 kHz) Designs and specifications are subject to change without prior notice.
LG Customer Information Center 1-800-243-0000 1-888-865-3026 USA, Consumer USA, Commercial Register your product Online! www.lg.com Printed in China NB2030A-N0.DUSALLK.130108.
