ENGLISH OWNER’S MANUAL 100 W 2.1 ch Built-in Subwoofer Sound Bar Please read this manual carefully before operating your set and retain it for future reference. NB2530A www.lg.com NB2530A-NB_DUSALLK_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 11. Only use attachments/accessories specified by the manufacturer. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
1 Getting Started FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: Getting Started (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Table of Contents 5 Table of Contents 1 1 Getting Started 3 Operating 2 6 6 6 6 6 6 6 6 7 8 8 9 Safety Information Unique features – Auto power down – Portable In – Speaker ez (easy) setup – LG Sound Sync Introduction – Symbols used in this manual Accessories Remote control Front panel Rear panel Mounting the main unit on a wall 13 13 13 13 13 13 13 14 14 14 15 16 17 2 Connecting 11 11 11 12 12 12 12 Optional equipment connection – PORT(Portable).
Getting Started Unique features 1 Auto power down Accessories Please check and identify the supplied accessories. Getting Started This unit supports to power off by itself for saving energy consumption. Portable In Listen to music from your portable device. (MP3, Notebook, etc) Remote control (1) Batteries (2) Wall bracket install guide (1) Wall brackets (2) Speaker ez (easy) setup Listen to audio from TV, DVD or Digital device with vivid 2.1 or 2.0 ch mode.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power): Switches the unit ON or OFF. FUNCTION: Changes input sources. OPTICAL: Changes input source to optical directly. MUTE : Mutes the sound. 1 Getting Started W/S FOLDER: Searches for a folder of MP3/ WMA files. When an USB containing MP3/ WMA files in several folders is being played, press W/S FOLDER to select the folder you want to play. -/+ VOL: Adjusts speaker volume.
Getting Started Front panel A 1 B C D E Getting Started F >>Caution A 1/! (Standby/On) Precautions in using the touch buttons B – / + (Volume) Adjusts speaker volume. yy Use the touch buttons with clean and dry hands. - I n a humid environment, wipe out any moisture on the touch buttons before using. C T (Play / Pause) D I (Stop) E F (Function) Press it repeatedly to select other function. yy Do not press the touch buttons hard to make it work.
Getting Started Mounting the main unit on a wall 9 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. TV 1 Getting Started You can mount the main unit on a wall. Prepare screws and brackets. Unit Wall bracket install guide 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Getting Started 3. Remove the Wall bracket install guide. 4. Fix it with screws (not supplied) as shown in the illustration below. 1 >>Caution yy Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury. Getting Started yy Do not hang onto the installed unit and avoid any impact to the unit. yy Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.
Connecting Optional equipment connection 11 OPTICAL In connection Connect optical output of external devices to the OPT. IN 1 or OPT. IN 2 connector. PORT(Portable). IN connection 2 Connecting To the digital optical output jack of external device MP3 player, etc... Speaker ez (easy) setup Listens to sound from TV, DVD or Digital Device with 2.1 or 2ch mode. Listening to music from your portable player The unit can be used to play the music from many types of portable player or external devices. 1.
Connecting USB connection Playable file Insert USB memory device to the USB port on the unit. MP3/WMA file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) 2 Connecting yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.wma” yy A protected file by DRM(Digital rights management) cannot be played on the unit.
Operating 13 Basic operations Other operations USB operation DRC (Dynamic range control) 1. Connect the USB device to the USB port. Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC. 2. Select the USB function by pressing FUNCTION. To Stop Playback Pause Press Z. Press d/M. Press d/M during playback. During playback, press C or V to go to the next file or to return to the beginning of the current file.
Operating AUTO POWER On/Off Auto power down Before operating this function, make sure that you have selected OPTICAL IN and turn on the AUTO POWER. This unit will turn off itself to save electric consumption in the case where main unit is not connected to external device and is not used for 25 minutes. This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc.) connected to this unit by the optical cable.
Operating LG Sound Sync 15 With wired connection 1. Connect your LG TV to the unit by using an optical digital cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute Refer to the TV's instruction manual for the details of LG Sound Sync.
Operating With wireless connection 1. Set up LG Sound Sync (Wireless) on the TV. Refer to the TV's instruction manual. 2. Turn on the unit by pressing 1 (Power) on the remote control. 3. Select LG TV function by pressing FUNCTION on the remote control. "PAIRED" appears on the display window for about 3 seconds and then you can see "LG TV" on the display window if connecting normally between this unit and your TV.
Operating Listening to music stored on the Bluetooth devices Pairing this unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using the FUNCTION. Appears “BT” and then “BT READY” in display window. ,,Note XX:XX means the last four digits of BT address.
Operating Sound adjustment ,,Note Setting the surround mode yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. yy You may need to reset the surround mode, after switching the input, sometimes even after the sound file changed.
Operating Controlling a TV with the supplied remote control You can control your TV using the buttons below. AV/INPUT VOL + PR/CH VOL - PR/CH Operation MUTE Turn the TV’s volume on or off AV/INPUT Switch the TV’s input source between the TV and other input sources. 1 (TV POWER) Turn the TV on or off. VOL +/– Adjust the volume of the TV. PR/CH W/S Scan up or down through memorized channels. Setting up the remote to control your TV You can operate your TV with the supplied remote control.
Troubleshooting Troubleshooting PROBLEM No Power No sound Display window is dark. CAUSE & CORRECTION yy The power cord is unplugged. Plug in the power cord. yy Check the condition by operating other electronic devices. yy Incorrect input source is selected. Check the input source and select the correct input source. yy The mute function is activated. Press MUTE or adjust the volume level to cancel the mute function. yy The Dimmer or the Sleep function is activated. Press SLEEP to cancel the function.
Appendix Trademarks and licenses 21 Maintenance Handling the unit When shipping the unit Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Manufactured under license under U.S.
Appendix Specifications General Power requirements AC 120 V, 60 Hz Power consumption 18 W Dimensions (W x H x D) 950 mm x 99 mm x 57 mm (37.4" x 3.9" x 2.2") Net Weight (Approx.) 3.5 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs Optical input 3.0 Vrms (p-p), Optical jack x 2 Portable input 0.5 Vrms (3.5 mm stereo jack) USB USB Version USB 1.
NB2530A-NB_DUSALLK_ENG.
LG Customer Information Center 1-800-243-0000 1-888-865-3026 USA, Consumer USA, Commercial Register your product Online! www.lg.com Printed in china NB2530A-NB_DUSALLK_ENG.
