ESPAÑOL MANUAL DEL PROPIETARIO Altavoz activo de 300 W Por favor, lea este manual detenidamente antes de utilizar su equipo y guárdelo para referencias futuras. NB3530A (NB3530A, S33A1-D) www.lg.com NB3530A-NB_DMEXLLK_SPA.
1 Comenzando 2 Comenzando Información de seguridad 1 Comenzando PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO QUITE LA CUBIERTA (O RESPALDO) DE ESTE PRODUCTO. NO HAY PARTES INTERNAS QUE PUEDAN SER REPARADAS POR EL USUARIO, PARA EL MANTENIMIENTO SOLICITE PERSONAL DE SERVICIO CALIFICADO.
Comenzando 3 Este dispositivo está equipado con una batería o acumulador portátil. Forma segura de retirar la batería del equipo: Retire la batería o pilas antiguas siguiendo el orden inverso al de instalación. Para evitar la contaminación ambiental y las posibles amenazas a la salud humana o animal, coloque la batería anterior en un contenedor adecuado en el punto de recolección designado. no se deshaga de las baterías con la basura normal.
Tabla del Contenido Tabla del Contenido 1 Comenzando 3 Operación 2 6 6 6 6 6 6 6 6 7 8 8 9 11 11 Información de seguridad Características exclusivas – Apagado automatico – Entrada de portátil – Configuración sencilla del altavoz – Sincronización de Sonido LG Introducción – Símbolos utilizados en este manual Accesorios Mando a distancia Panel Frontal Panel Posterior Montaje mural de la unidad principal Configuración – Vinculación al subwoofer inalámbrico 14 14 14 14 2 Conectando 12 12 Conexión
Tabla del Contenido 4 Solución de problemas 21 Solución de problemas 5 Apéndice 22 22 22 23 Marcas y Licencias Mantenimiento – Manipulación de la unidad Especificaciones 5 1 2 3 4 5 NB3530A-NB_DMEXLLK_SPA.
Comenzando Características exclusivas 1 Accesorios Por favor, verifique e identifique los accesorios suministrados. Comenzando Apagado automatico Esta unidad admite el apago automatico para ahorrar consumo de energía. Entrada de portátil Control remoto (1) Baterías (2) Plantilla de instalación para montaje en pared (1) Soporte de pared (1) Cable óptico (1) Bridas para arreglar los cables (2) Escuche música desde un dispositivo portátil.
Comenzando Mando a distancia 7 • • • • • • • • • • a • • • • • • • • • • 1 (Encendido) : Interruptor para ENCENDER y APAGAR. FUNCTION : Escoge la función y la fuente de entrada. Comenzando W/S FOLDER : Busca una carpeta de archivos MP3/WMA. Cuando se reproduce un USB que contiene archivos MP3/WMA en diversas carpetas, pulse W/S FOLDER para seleccionar la carpeta que desea reproducir. 1 OPTICAL : Cambia la fuente de entrada a óptica directamente. MUTE @ : Silencia el sonido.
Comenzando Panel Frontal 1 A B C D E Comenzando G H F A 1/! B - / + (Volumen -/+) Ajusta el nivel de volumen. C T (Reproducción/Pausa) D I (Detener) E F (Función) Seleccione la función y la fuente de entrada. F Altavoces G Ventana de visualización H Puerto USB ,,Nota Abra la cubierta USB con el dedo para conectar USB. F >>Precaución Precauciones al utilizar los botones táctiles yy Utilice los botones táctiles con las manos limpias y secas.
Comenzando Montaje mural de la unidad principal 9 Wall Mount Brac ket Installation Template 1 Comenzando 2. Para el montaje mural (hormigón), utilice tacos de pared (no incluidos). Deberá taladrar algunos orificios. Se suministra una ficha guía (GUÍA DE INSTALACIÓN DEL SOPORTE MURAL) para taladrar. Use dicha guía para verificar el punto a taladrar. Puede montar la unidad principal sobre una pared. Prepare los tornillos y los soportes.
Comenzando 3. Retire la GUÍA DE INSTALACIÓN DEL SOPORTE MURAL. 1 4. Fíjelo con tornillos (no incluidos) como se muestra en la figura inferior. >>Precaución yy No instale la unidad boca abajo. Se puede dañar las partes de esta unidad o sea causa de lesiones personales. Comenzando yy No se cuelgue de la unidad instalada y evite cualquier impacto a la unidad. yy Asegure la unidad firmemente a la pared de modo que no se caiga. Si la unidad se cae, puede ocasionar una lesión o daño al producto.
Comenzando Configuración Indicador LED del subwoofer inalámbrico Color del LED Estado Amarillo El subwoofer inalámbrico recibe señal de la unidad. Amarillo (Destellos) El subwoofer inalámbrico está intentando realizar la conexión. Rojo El subwoofer inalámbrico está en modo de espera. Apagado (Sin pantalla) El cable de alimentación del altavoz de graves está desconectado. Configuración inicial del subwoofer inalámbrico 1.
2 12 Conectando Conectando Conexión opcional de equipos Conexión de entrada OPT. IN Conecte la salida óptica del dispositivo externo a la toma del conector OPTICAL IN 1 o OPTICAL IN 2. Conexión de PORT.IN (Portátil Entrada) 2 Conectando A la conexión de salida óptica digital del dispositivo externo Reproductor MP3, etc... Configuración sencilla del altavoz Escuche sonidos de la TV, del DVD o del Dispositivo Digital con modo 2.1 o 2ch.
Conectando 13 Conexión USB Dispositivos USB Compatibles Inserte el dispositivo de memoria USB al puerto USB de la unidad. yy Reproductor MP3 : Reproductor MP3 tipo Flash. yy Unidad Flash USB : Dispositivos compatibles con USB1.1. yy La función USB de esta unidad no acepta algunos dispositivos USB. Requerimiento de dispositivos USB yy No retire el dispositivo USB mientras está en operación. yy Para USB de gran capacidad, la búsqueda puede tomar más de unos cuantos minutos.
3 Operación 14 Operación Funcionamiento básico Otras funciones Funcionamiento del USB DRC (Dynamic Range Control, control de rango dinámico) 1. Conecte el dispositivo USB al puerto USB. 2. Seleccione la función USB presionando FUNCTION. 3. Para seleccionar el archivo que desea reproducir, presione C o V. Para Detener 3 Reproducción Operación Pausa Saltar al archivo siguiente/ anterior Hacer esto Presione Z. Presione d/M. Durante la reproducción, presione d/M.
Operación 15 ENC./APAG. AUTO POWER Aviso de Auto Apagado Antes de utilizar esta función, asegúrese de que seleccionó OPTICAL y activó el AUTO POWER. Esta función enciende o apaga automáticamente la unidad cuando enciende o apaga el dispositivo externo (TV, Reproductor DVD, Reproductor de discos Blu-ray, etc.) conectado a esta unidad a través del cable óptico.
Operación Sincronización de Sonido LG Con conexión por cable 1. Conectar su televisor LG a la unidad mediante un cable digital óptico. Usted puede controlar algunas funciones de esta unidad con el mando a distancia del televisor con Sincronización de Sonido LG. Es compatible con la TV LG que soporta Sincronización de Sonido LG. Asegúrese de que el logo de Sincronización de Sonido LG aparece en su televisor.
Operación Con la conexión inalámbrica 1. Configurar la Sincronización de Sonido LG (Inalámbrica) en el televisor. Consulte el manual de instrucciones del televisor. 2. Encender la unidad. 17 Cómo usar la tecnología inalámbrica Bluetooth® 3. Seleccionar la función TV LG. "PAIRED" aparecerá en la ventana durante unos 3 segundos y luego se podrá ver " LG TV " en la ventana de la pantalla si se conecta normalmente entre esta unidad y el televisor.
Operación Cómo escuchar música de un dispositivo Bluetooth Emparejar el dispositivo Bluetooth y la unidad Antes de iniciar el procedimiento de vinculación, asegúrese de que la función Bluetooth esté encendida en el dispositivo Bluetooth. Consulte la guía de usuario de su dispositivo Bluetooth. Una vez realizada la operación de vinculación no es necesario volver a realizarla. 3 ,,Nota yy Debe conectar el dispositivo Bluetooth a esta unidad de nuevo cuando se reinicie.
Operación Ajuste del sonido Configuración del modo envolvente Este sistema tiene un número de efectos de sonido envolvente predefinidos. Puede seleccionar un modo de sonido que desee, por medio de SOUND EFFECT. Los elementos mostrados para el ecualizador pueden ser diferentes dependiendo de las fuentes de sonido y los efectos. En Pantalla Descripción BYPASS Puede disfrutar el sonido sin efecto de ecualizador BASS El BASS es Estallido de Bajos.
Operación Control de la TV con el control remoto incluido Puede controlar su TV con los siguientes botones. AV/INPUT VOL + PR/CH VOL - PR/CH 3 Botón Operación Operación MUTE@ Apaga y enciende el volumen de la TV. AV/INPUT Cambia la fuente de entrada de entre la TV y otras fuentes de entrada. 1 (Enciendido de TV) Enciende y apaga la TV. VOL +/– Ajuste el volumen de la TV. PR/CH W/S Sube o baja en la lista de canales memorizados.
4 Solución de problemas Solución de problemas 21 Solución de problemas PROBLEMA No hay energía. CAUSA Y SOLUCIÓN yy El cable de alimentación está desconectado. Conecte el cable de alimentación. yy Verifique la condición operando otros dispositivos electrónicos. yy Se seleccionó el origen de entrada incorrecto. Revise el origen de entrada y seleccione el correcto. No hay sonido No hay sonido woofer yy No está conectado el cable de alimentación del woofer.
5 Apéndice 22 Apéndice Marcas y Licencias Mantenimiento Manipulación de la unidad Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de la doble D son marcas comerciales de Dolby Laboratories. Al transportar la unidad Fabricado con licencia de las patentes de EE.UU. nros.: 5,956,674; 5,974,380; 6,487,535 y otras patentes de EE.UU. y de otras partes del mundo aprobadas y en trámite. DTS, el símbolo y DTS junto con el símbolo son marcas registradas, junto con DTS 2.
Apéndice 23 Especificaciones Generales Requerimientos del adaptador de ca 120 V ~ 60 Hz Consumo de energía 40 W Dimensiones (An x Al x Pr) (950 x 71 x 47) mm Peso neto (aprox.) 2,5 kg Temperatura de funcionamiento 41 °F a 95 °F (5 °C a 35 °C) Humedad de operación 5 % a 90 % Suministro de Energía del Puerto DC 5 V 0 500 mA Entradas/ Salidas OPTICAL IN 3 V (p-p), Conector Óptico x 2 PORT.
Sor Juana Inés de la Cruz 555 Col. San Lorenzo Industrial Tlalnepantla de Baz Estado de México C.P. 54033 Tel. (55) 5321-1919 Lada sin costo 01 (800) 347 1919 LG Electronics México S.A. de C.V. NB3530A-NB_DMEXLLK_SPA.