Digital Signage Media Player NC1000 WARNING -This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Temporary noise is normal when powering ON or OFF this device.
Contents Digital Signage Media Player Introduction of SuperSign............................................................................................1 Characteristics of the product (What is SuperSign?)...........................................................................1 Minimum System Requirement............................................................................................................1 Files supported by SuperSign.............................................................
UPDATE ..............................................................................................................................................31 Massage..............................................................................................................................................33 Log Report............................................................................................................................................33 E-mail Configuration...................................
Introduction of SuperSign Characteristics of the product (What is SuperSign?) LG SuperSign is a solution to allow users to transmit media and information files stored on a computer installed with SuperSign Software using LAN. Differentiated special feature VAR(SI: System Integration), a software that can be easily used by system operators as well as private users. SuperSign Software provides convenient User Interface(UI) and various functions for management of contents.
Introduction of SuperSign Installation of universal codec and S/W 1. Microsoft Office -T o support Microsoft Office Word, PowerPoint or Excel documents, MS Office (2000, XP, 2003, 2007) must be installed on the Manager and Player. -S lide show viewing is possible if ‘Show’ configuration is configured on the Microsoft PowerPoint document. 2. Unified Codec Package : A bundle of Direct Show Filters gathered for play of Microsoft Windows Videos http://www.codecguide.com http://shark007.net http://www.
Introduction of SuperSign Multi I/O Port Chip Set Nvidia MCP7A-ION Serial Port One external RS-232 Serial port USB Port Hi-Speed USB 2.0 port 480 Mbps rate (x 5) LAN Port Realtek RTL8103E 10/100 Mbyte Ethernet controller VGA / HDMI Nvidia MCP7A-ION integrated Graphic chipset 4-in-1 Card Secure Digital(SD) / MultiMedia Card(MMC/MMC4.0) / Memory Stick(MS/MS-Pro) / xD Memory Card PCI Express Card Slot Supported LINE OUT Supported SPDIF 5.
Composition of SuperSign Parts !!! Thank you very much for purchasing our product !!! Case Power Cable Handle x 2 NOTE Setup program/ User Manual RS-232C Cable M3, L8 x 4 (For attachment of handle) Box Guide Rail x 2 M3, L12 x 4 (for attachment of Box Guide on the monitor) Parts may look different than the pictures shown here.
Composition of SuperSign Name of each part 1 2 3 4 5 6 4 7 8 9 10 4 11 12 1 Power cable input terminal 6 LAN/USB connection terminal 2 Power Switch 7 4 IN 1 Multi-card Slot 3 RS-232C output terminal 8 D-SUB output terminal 4 USB input terminal 9 OPTICAL Operation and program installation can be carried out using USB Memory, USB 10 SuperSign Power Button Hard-disk, USB CD-ROM, Keyboard (wired/wireless), Mouse (wired/ 11 Line-Out Connection Terminal wireless), etc.
Composition of SuperSign Installation procedure of the product 1. Please insert the handle into the groove on the side of product as shown in the picture. 2. Please secure the handle using screws as shown in the picture. 3. Please insert rails into the groove on the side of the product. 4. Please attach Box Guide on four hole on the back of monitor as shown in the diagram using screws. 5. Please attach the case on the Box Guide as shown in the diagram. 6.
Composition of SuperSign Cable connection procedure of the product A B C D E F Connect using D-SUB input cable (Check monitor RGB input) LINE-OUT Cable should be connected for Audio output during D-SUB connection Power Cable RS-232C Cable Provided RS-232C cable is to connect the SuperSign to the monitor. HDMI Cable (Check monitor HDMI input) * When connecting a HDMI device 1) Connection for audio output is not necessary as HDMI terminal outputs both audio and video.
Usage of the SuperSign Manager Software In order to use SuperSign program, install the SuperSign Manager Software from the included CD and connect to user’s monitor and SuperSign. Installation of SuperSign program 1. Installation window appears automatically when you click on ‘SuperSign Manager’ from main screen of the CD Please Install SuperSign Manager Software in the order shown below.
Usage of the SuperSign Manager Software Install SuperSign Manager Software in the order shown below. *My Computer > SuperSign > SuperSign > SuperSign Software > Application > SuperSign Manager > SuperSignManager_setup.
Usage of the SuperSign Manager Software 1. It is registered to Start menu after program installation automatically. 2. Remove Supersign Manager : Removal of installed SuperSign Manager Software. 3. Supersign Manager : SuperSign Manager Software is operated. Removing SuperSign Software Select remove Supersign Manager removal of installed SuperSign Manager Software. Uninstall 1 2 Finish * When deleting from the control panel 1.
Usage of each item on SuperSign Manager Software SuperSign Login 1. Following login window appears when SuperSign Manager Software is executed. 2. Default ID is “Administrator”. ID and password is stored as the values input during initial login. Password can be changed from File Menu. ID is fixed as value input during initial login and it cannot be changed. 3. SuperSign Manager Software closes automatically when not logged in by pressing "Cancel" button.
Usage of each item on SuperSign Manager Software Canvas Setting 2. Select “OK” after selecting desired template and layout setting. 1. Select “OK” after selecting desired resolution. 3.
Usage of each item on SuperSign Manager Software CONTENTS EDIT MENU Main Window Time Line is closed when 1 is clicked Property screen of each Zone appears when 2 is clicked 2 1 zone Canvas TimeLine Media Library * Media Library : Desired video, image, sound, flash and documents can be imported. ( : Import files by clicking on the icons.) * Canvas : Zone of respective files are created when files registered on Media Library dragged and dropped on Canvas or Time Line.
Usage of each item on SuperSign Manager Software 1. Preview : Previews the contents of current Canvas. 2. Save : Creates Contents by storing details of current Canvas. 3. Send To Player : A function to play current contents of the Player by immediately distributing them. (Contents information and Player information can be viewed by selecting a Player to play back and clicking on “OK” button.) * Player Scan pop-up window appears if there are no connected Player and Players can be scanned. 4.
Usage of each item on SuperSign Manager Software Registering Media Library 1. Click on Media icon on “Library tab " to open the popup window. 2. Select the file to upload from the popup window. 3. “File Uploading” popup window will be displayed while the file is being uploaded, and it will automatically disappear when the upload is completed. 4. The uploaded file will be displayed in the tab of each corresponding file format. 5.
Usage of each item on SuperSign Manager Software Creation of Contents 1. Zone of respective file is created when a file registered on Media Library is dragged and dropped on Canvas or Time Line. * It is added to one single Zone if several files are selected, dragged and dropped simultaneously. 2. Zone : Only a Zone is created when Canvas is clicked after selecting this button. Files can be inserted into the created Zone by dragging and dropping files onto the Zone.
Usage of each item on SuperSign Manager Software Configuration of TimeLine 1 2 3 4 5 6 7 1. Gap of time axis on Time Line can be adjusted. Intervals are 1,10,30 minutes and ‘upper time limit’ is 12 hours. 2. : Function to display/hide each color properties and icon information from the screen for classification of Zones. 3. Zone name can be changed by double-clicking on the Zone. Zone name is created depending on the type of media by default. 4.
Usage of each item on SuperSign Manager Software Contents Properties Media File Displays connected Player or group information. Nothing is displayed when there is no connected Player. Displays connected Player or group information. Nothing is displayed when there is no connected Player. It shows media information selected. Name, resolution, size, play time Resolution information A Function to adjust size, location and transparency of background color of a Zone. Background Color assignment.
Usage of each item on SuperSign Manager Software Displays connected Player or group information. Nothing is displayed when there is no connected Player. Displays connected Player or group information. Nothing is displayed when there is no connected Player. It shows media information selected. Name, size, play time It shows media information selected. Name, resolution, size, play time Set media play time selected Set media play time selected.
Usage of each item on SuperSign Manager Software Service Displays connected Player or group information. Nothing is displayed when there is no connected Player. Displays connected Player or group information. Nothing is displayed when there is no connected Player. Information of URL to be linked. Set media play time selected. Set media play time selected. Setting for text condition. Font : text form Size : text size Color : text color Style : Bold, Italic, Underline.
Usage of each item on SuperSign Manager Software Displays connected Player or group information. Nothing is displayed when there is no connected Player. Displays connected Player or group information. Nothing is displayed when there is no connected Player. Set media play time selected. Set media play time selected. Setting for text condition. Font : text form Size : text size Color : text color Style : Bold, Italic, Underline Setting for text condition.
Usage of each item on SuperSign Manager Software Configuration of service function 1. URL : Add = Web Zone is created when clicked after entering a URL. Reset = Stored URL disappears. 2. RSS Feed Add = RSS Zone is created when clicked after entering a URL. Reset = Stored URL disappears. 3. Widget Add = Widget Zone is created when clicked after entering a URL. Reset = Stored URL disappears. 4. Date/Time : Date Add = Date Zone is created. Time Add = Time Zone is created 1 2 3 4 * Widget Usage Guide.
Usage of each item on SuperSign Manager Software PLAN MENU Main Plan Window 1 3 2 4 5 1. Information of connected Player can be viewed. 2. List of created contents and media files can be viewed from ‘Contents edit’. 3. Units of displayed time can be selected. (10minutes/ 30minutes/ 1hour are supported.) 4. Contents and media files can be input into desired date. * Schedule input into past dates is not possible and therefore, it is disabled. 5. Plan related property screen is displayed. 6.
Usage of each item on SuperSign Manager Software Plan configuration 1 3 2 1. Create Time Cell by drag & drop after selecting contents or media files. Play back time of Time Cell can be adjust by selecting a Time Cell and dragging each corner of the Time Cell. 2. It is name of selected content for media file. 3. Time cell deletion function. (Warning Pop-up window appears when deletion is selected) 4. Week View : Shown on the screen as 7 day units.
Usage of each item on SuperSign Manager Software Contents Copy 1. Select a Time Cell 2. Shape of mouse point is changed and enters into copy mode when Ctr l + C is pressed. 3. Paste copied Time Cell by clicking on desired location. 4. Exit from copy mode by pressing “ESC” key. 5. Changed schedule is applied when ‘Save’ is clicked after changes are made to schedule.
Usage of each item on SuperSign Manager Software MANAGEMENT MENU Main Management Screen 5 4 1 2 3 1. Shows currently connected Players. 2. Contents and media file lists created from ‘Contents Edit’ can be viewed. 3. Information and Control function. However, information is not shown in case of a group. * : Group : Player : Display Device 4. Scan : Rescans Players. Add Group : Creates a new group. Release : Deletes selected group. Tree : Tree view mode.
Usage of each item on SuperSign Manager Software Management configuration 1. Select a Player. 2. Drag & drop by selecting contents or media files. 3. Contents and Player information to be played back can be viewed. * Time Setting - Infinite Repeat Time: Repeated play back until a newly scheduled content is executed. - Duration Time : Play back of contents from current time for configured duration. 1. A function for combined management of Players and Displays included in the Group. 2.
Usage of each item on SuperSign Manager Software Tile Mode Control Cable 2 1 1. Tile mode can be configured when several monitors are connected to one SuperSign 2. Connect ‘RS232C Out’ of SuperSign to ‘RS232C In’ of the monitor. 1 3. For connection between monitors, connect ‘RS232C In’ and ‘RS232C Out’ as shown in 2 4. To set the Tile Mode, you must separately purchase the RS-232C cable.
Usage of each item on SuperSign Manager Software Control Tile Configuration Please execute the “Display Search for Daisy Chain” of option in advance when you configure the Tile Mode. 1 Tile size can be configured with mouse drag and clicks. Can go to the next step. A tab to configure Tile Mode of the display connected to a Player. 2 Button to go to the next step is positioned. Display is arranged by configured Tile Size Button to configure each input is positioned.
Usage of each item on SuperSign Manager Software 4 * Attention If select input source after selecting one display, the display sets its tile size as 1x1. After selecting display areas to be set as a tile, you can select the input source 5 Monitor location can be configured by Drag & Drop. 6 Complete configuration of Tile Mode using ‘Apply’ button Cancel configuration of Tile Mode using ‘Cancel’ button Initialize configuration of create Tile using ‘Reset’ button Shows the configured Tile image.
Usage of each item on SuperSign Manager Software OPTION 1. When Display is searched manually after connecting a monitor with RS232C cable, select Player and use ‘Display Search Control’ from "Control -> Option -> Daisy Chain Display". 2. When ‘Search’ button is clicked after selecting Daisy Chain, the Display is found and added. UPDATE It is a function to remotely update SuperSign Player Software of the selected Player. Setup values input by the user on the Player is maintained.
Usage of each item on SuperSign Manager Software 2 Select SuperSign Player installation file downloaded from SuperSign website (www.lge.com) by pressing on ‘Open’ button. 3 Execute update function of the selected Player by pressing on ‘Update Now’ button. Player on the remote site executes update with installation file selected by the user and automatically reboots once the update is completed.
Usage of each item on SuperSign Manager Software Massage A function to display messages in cases of situations such as notice, information and emergency. 1 2 3 2 4 5 1. It changes text attributes (size,color,etc). 2. It changes text messages to be displayed. 3. It adjust a message location to send. 4. It changes play time of message to be displayed.. Default Play time is 10 seconds. 5. Message is immediately transmitted to the Player when “Send” is input after writing the message.
Usage of each item on SuperSign Manager Software E-mail Configuration Log report can be sent by e-mail if you follow the procedure as below. 1) To set e-mail configuration, select ‘File menu>Option>Management‘ as shown. E-mail configuration menu 2) Pop-up window appears. Input an e-mail address and outgoing mail server in ‘Admin email’ and ‘SMTP Server’ textbox respectively. 3) If SMTP Server needs user authentication, Input user ID and password in the corresponding fields, then click ‘OK’ button.
Usage of each item on SuperSign Manager Software File Menu Edit Menu View Menu 35
Usage of each item on SuperSign Manager Software Option Menu Setup Menu Help Menu 36
Player Menu usage of SuperSign ※ You can enter the SuperSign Player Menu by selecting the Setup menu from the SuperSign Player TrayIcon menu from the desktop. (Refer to the screen on page 43 for location of Tray Icon). ※ When you press the ESC button from the SuperSign Player standby screen, you can exit to the desktop. Login Screen 1 Enter password. Default password is "0000" and it can be changed. Move the cursor with the mouse. 2 Screen that appears when an incorrect password is entered.
Player Menu usage of SuperSign Network Player IP Mode : A menu to configure network connection related information. Initial condition is Dynamic IP. 1 When setting as Dynamic IP, IP assigns automatically. 2 Player Name can be put in Dynamic IP Other items be arrangement disable state. 3 Player Name is able to put by number/English/special characters. 4 When input is done and click “Save”, setting condition is saved. 1 It is the same as Dynamic IP setting. 2 Default value of each item is "0.0.0.
Player Menu usage of SuperSign Manager Discovery : Menu for setting server IP. Initial condition is Auto Discovery. 1 IP assigns to Auto Discovery automatically. 2 Click “Save”, setting condition is saved. 1 “Manual Discovery” is a menu for setting server IP directly. 2 Default value of IP Address is "0.0.0.0" 3 Only numerical values can be entered. 4 When input value is larger than 255 and “Save” is clicked, value of ‘0’ is stored. 5 Click “Save”, setting condition is saved.
Player Menu usage of SuperSign Display Menu for setting display form. Submenu is Landscape and Portrait. Initial condition is Landscape.
Player Menu usage of SuperSign Password Setting 1 A function to configure password input requirement at initial entrance. 2 Submenu is ‘Disable’ and ‘Enable’ 3 It is saved when each category is selected. 4 Initial condition is 'Enable' 1 It is a menu to change password. 2 Password provided initially can be changed. 3 Enter desired password on ‘Change’ field and press “OK” to save. 4 Input the changed password at Verify menu to check the Change password.
Player Menu usage of SuperSign EWF It is a function to protect the product and file systems. When EWF is in Enable status, data saved on C drive is deleted when the system restart. 1 Initial condition is 'Enable'. 2 System must be restart after changes are made to settings from the menu. 3 Maintain EWF as Enable if possible to protect the system from virus or spywares. 4 If program installation or changes in the system such as changing windows settings are to be carried out, procedure is as follows.
Player Menu usage of SuperSign Others Composition of SuperSign Player Tray Icon Menu Open exported file : Exported canvas can be selected by creating a file open window. (Identical function when tray icon is double clicked) Play schedule : Returns to Signage mode and if a schedule exists, it is played according to preexisting schedule. Delete schedule : Deletes preexisting schedule. Setup : Shows the Setup Windows needed for Player setup. About the program : Displays program information.
Player Menu usage of SuperSign Setting Regional and Language Options Set the Windows Language to the SuperSign Manager and SuperSign Player by using the Regional and Language Options menu from Windows Control Panel. Windows language on SuperSign Manager should be identical to SuperSign Player. * How to change the Windows Language setting 1. Disable the EWF. 2. Click on Control Panel > Regional and Language Options. 3.
Program Restriction items Installation / Removal - All previously input data by the user are deleted during program removal. - Data preservation or initialization can be selected when the program is reinstalled without removal. - In the case of Windows Vista OS, approaching user system with administrator’s authority must be allowed during installation/ execution. Login - Password is managed as the input value of initial entry. - Password cannot be recovered if forgotten.
Program Restriction items Plan Manager - During transmission of prepared schedule through ‘Send to Player’, it may take some time depending of network status, and it can be stopped during transmission using ‘Cancel’ button. In this case, download of stopped contents cannot be resumed, and overwrite is carried out during retransmission. - Proper operation of the Player is not carried out of transmission is not completed to 100%.
Program Restriction items Preview Player Manager - When different codec is installed on the Manager and the Player, the Player may not play. (Install same type and version of codec on both the Manager and the Player.) - Install same version of Microsoft Office on both the Manager and the Player. Play form maybe displayed differently. (It is supported from MS OFFICE 2000, XP, 2003, 2007) - In the case of Office files, please close the office program before preview.
Q&A * Transmission stopped during ‘Send to Player’. - Cancel and retransmit after verifying that it is a proper media file. * Player cannot be found when scanned. - Verify power on/ off of the Player. - Verify the operation of SuperSign Player. - Verify the connection status of network cable which plugged in SuperSign Player. - Verify the IP address settings of SuperSign Player. - Try to connect with ‘Manual Discovery’ from the Player Menu during operation of SuperSign Player.
Q&A ※ They are information pop-up used in the Manager. Please use as “Solution Methods” Details Solution Method The file is not supported. It is already registered in Media Library of the file. Please check the Media Library. The file is not supported. It is an unsupported file. Please verify if it is an improper file. The file is not supported. The video file is invalid or its codec is not available. It is an improper file or a codec is not installed.
SuperSign network connection guide 1. Simple network connection (LAN) - Same network refers to the case of using the same Gateway and Subnet Address in IP communications. - SuperSign manager can find the SuperSign player in the same network through the scan function. - For 1:1 connection, you must use the cross cable made for direction connection without any network equipment.
SuperSign network connection guide 2. Hierarchical network connection (Internet) - SuperSign manager cannot find the SuperSign player in a different network through the scan function. - SuperSign player can connect to the SuperSign manager on another network using the manual discovery mode. - When the SuperSign manager is in a private network, it may not be connected properly to the SuperSign player.
SuperSign network connection guide 3. Wireless network connection - SuperSign manager and Supersign player supports both wired and wireless network connections. - SuperSign player may not work properly when both the wireless and wired network devices are used simultaneously. - When connecting to SuperSign manager using the wireless network, unplug the LAN cable. When connecting to the SuperSign manager using the wired network, do not connect the wireless network device.
Limitation of Windows embedded Microsoft Windows Embedded Standard limited element - When you run Full Screen (Alt+Enter) from the DOS window, the font can be broken. -W hen saving the file with a different name from the Print window, the name of the menu window is displayed in English -W hen moving to the detail menu item of Control panel etc., some menus are displayed in English (HyperTerminal, Language setting by country etc.
Restrictions of Nvidia Graphic chipset ※ Nvidia Graphic chipset included to NC1000 does not support change in main/sub screen of monitors from Display properties. ※ Main/sub screen of monitors can be changed from Control Panel/NVDIA Control Panel Menu.
