ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SLOVENŠČINA ITALIANO OWNER’S MANUAL ESPAÑOL Wireless Speaker with Lightning Dock ΕΛΛΗΝΙΚΑ MUSIC IN STYLE PORTUGUÊS Please read this manual carefully before operating your set and retain it for future reference. ND2530 ND2530_01_130225_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; Getting Started The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Getting Started Disposal of your old appliance 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.
1 Getting Started Getting Started LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product: LG Electronics Inc.
Table of Contents 5 Table of Contents 1 Getting Started 3 Troubleshooting 2 6 6 6 7 8 8 9 9 Safety Information Main Features Accessories Introduction Remote Control Front Panel Rear Panel Connecting the AC Adapter How to Attach the Ferrite Core (For EMI Only) 17 Troubleshooting 4 Appendix 18 18 19 Trademarks and Licenses Handling the Unit Specifications 2 Operating 10 10 10 10 11 13 13 13 13 Basic Operations – Switch to Standby mode – Switch to Power Off – iPod/iPhone/iPad Operations – Comp
Getting Started Main Features 1 Made for iPod/iPhone/iPad Accessories Please check and identify the supplied accessories. Getting Started Enjoys music from iPod/iPhone/iPad with simple connection. Portable In Listens to music from your portable device. Remote control (1) Battery (1) Power cord(1) AC adapter(1) Bluetooth® Enjoys music from Bluetooth device with simple connection. BASS Reinforce BASS sound effect.
Getting Started Remote Control 7 Battery Installation You have two ways to open the battery cover. 1. Turn the battery cover counterclockwise by using a coin or your finger. Then take the battery cover. 1 Getting Started Coin 1 (Power): Switches the unit ON or OFF. PFUNCTION : Selects the function and input source. +/- (Volume) : Adjusts volume of speaker. Finger 2. Insert and fix the battery with the plus (+) facing in the same direction as the plus (+) on the battery cover.
Getting Started Front Panel 1 Getting Started a b c d iPod/iPhone Dock (Lightning Connector) Support for iPod/iPhone Speaker Display Window Displays each of functions. e 1/F (Power/Function) - Power on : Press 1/F to turn the unit on. - Power off : Press and hold 1/F for about 3 seconds to turn the unit off. - Selects the function and input source. +/- (Volume) Adjusts volume of speaker. Rear Panel BASS Reinforce BASS sound effect.
Getting Started >>Caution Precautions in using the touch buttons yy Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. yy Touch the button that you want to work in order to operate the function correctly. yy Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. >>Caution Only use the AC adapter supplied with this device.
2 10 Operating Operating Basic Operations Switch to Standby mode 2 2. Dock the iPod/iPhone(Lightning Connector) firmly. If you turn this unit on, your iPod/iPhone is automatically turned on and starts recharging . Press 1 or press and hold 1/F. The LED indicators light up and the last function you selected blinks.Then the unit switches to standby mode. Operating Switch to Power Off Press 1 or press and hold 1/F. The LED indicators light off and the unit switches to power off.
Operating Enjoying Music by Connecting Your iPod/iPhone/iPad(30 Pin/Lighting Connector) to the Unit 11 Compatible iPod/iPhone/iPad yy The unit supports the models as follows ; iPhone 5 iPhone 4S iPhone 4 iPhone 3GS iPad 3G, 4G iPad 2 2 Operating iPad iPad mini iPod touch 3G, 4G, 5G iPod nano 4G, 5G, 6G, 7G Depending on your iPod/iPhone/iPad’s software version, you may not control your iPod/iPhone/ iPad from the unit.
Operating ,,Note yy If iPod/iPhone/iPad operation has an error, check these problems as follows; - Your iPod/iPhone/iPad is not connected firmly. - This unit recognizes your iPod/iPhone/ iPad as an unknown device. - Your iPod/iPhone/iPad is exceptionally low in power. 2 Operating / The battery needs to be charged. / If you charge the battery while iPod/ iPhone/iPad is extremely low in power, it may take longer to be charged.
Operating 13 Turning Off the Sound Temporarily Listening to Music from Your Portable Device Press @to mute the sound. You can mute the sound in order, for example, to answer the telephone. To cancel mute function, press @ again or adjust volume level by pressing +/(Volume). The unit can be used to play the music from many types of portable device. (Portable cable is not supplied as an accessory with this unit.
Operating Using a Bluetooth Wireless Technology About Bluetooth Bluetooth® is wireless communication technology for short range connection. 2 The available range is within 10 meters. Operating (The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms.) Connecting individual devices under Bluetooth® wireless technology does not incur any charges.
Operating ,,Note yy After your device is connected to the unit via Bluetooth, the function switches to BT automatically. yy After searching for this unit on your Bluetooth device, connect the Bluetooth device to this unit. Then play music you want. Using Bluetooth App About LG Bluetooth Remote App yy You cannot control the Bluetooth device with this unit. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported.
Operating Install “ LG Bluetooth Remote App” by using QR code 1. Install “ LG Bluetooth Remote app” by using QR code. Use the scaning software to scan the QR code. 2. Tap an icon for installation. 3. Tap an icon for downloading. ,,Note yy BT app will be available in the software version as follow; iOS O/S : Ver 4.3(or late) yy If you place your iPod/iPhone(Lightning Connector) onto the dock of this unit after Bluetooth connection, the Bluetooth connection is deactivated.
Troubleshooting 17 Troubleshooting Problem No Power. No sound. Correction yy Plug in the power cord. yy Check the condition by operating other electronic devices. yy Press PFUNCTION or 1/F and then check the selected function. yy Adjust volume of your portable device. yy Operate the remote control within about 23 ft (7 m). The remote control does not work properly. yy Remove the obstacle in the path of the remote control and the unit. iPod/iPhone/iPad does not work.
Appendix Trademarks and Licenses Handling the Unit When Shipping the Unit “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Appendix 19 Specifications General AC adapter requirements DC 12 V 0 2.5 A, 100 -240 V, 50/ 60 Hz Power consumption 25 W Dimensions (W x H x D) 275 X 90 X 170 mm Net Weight (Approx.) 1.3 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs PORT. IN 500 mV (3.5 mm stereo jack) USB USB Version USB 1.1 Bus Power Supply USB : DC 5 V 0 2.1 A, iPod/iPhone : DC 5 V 0 2.5 A 4 Appendix Amplifier Output Power 5 W + 5 W (8 Ω at 1 kHz) T.H.
ND2530_01_130225_ENG.
