Installation Guide

Select Wi-Fi Connection.
You can check and connect to the available wireless Internet networks; if you have set
up the TV for a wireless network.
Add a Hidden Wireless Network
You can add a wireless network if you input the name of the network directly.
Connect via WPS PBC
If the wireless router you want to connect to has a Wi-Fi Protected Setup-Push Button
Configuration (WPS-PBC) feature, you can easily connect to the wireless router by
pressing the WPS-PBC button on the router. Press the wireless router’s WPS-PBC
button and then press the TV’s [Connect] button.
Connect via WPS PIN
This is a method to connect to an access point using a Wi-Fi Protected Setup-
Personal Identification Number (WPS-PIN). Select the access point (AP) to which you
would like to connect. Enter the PIN displayed on the access point’s Wi-Fi device.
Advanced Wi-Fi Settings
Once you connect to a wireless network you can view connection information such as
detailed IP address information. In addition, you can change the IP address and DNS
server address you want to connect to by pressing the Edit button.
The IPv6 setup does not support Edit.
For more information on how to connect to the network, see Getting Started with LG
webOS TV Connecting to the Network in User Guide.
Device Connection Settings
Connection Device Connection Settings
You can link the information about the devices connected to the TV and configure
settings related to operations.
Auto Device Detection
It automatically sets to enable you to control the devices connected via the HDMI with
the Magic Remote.
SIMPLINK (HDMI-CEC)
80