Owner's Manual DLP PROJECTOR Please read the safety information carefully before using the product. PA1000 PA1000W www.lg.com (Brazil : www.lge.
LICENSE LICENSE Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.
ING/CAUTION ELECTRIC SHOCK O NOT OPEN SAFETY INSTRUCTIONS 3 SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. yy Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product.
SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Indoor Installation WARNING yy Do not use the projector outside and do not expose the product to any humidity or water. - Since the product is not waterproof, this may result in a fire or electric shock. yy Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. - This may result in fire.
SAFETY INSTRUCTIONS yy Be careful not to tip the projector over when connecting external devices to the projector. - This may cause personal injury or damage to the projector. Power WARNING yy The appliance coupler is used as the disconnect device. - Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible. yy The grounding wire should be connected. - Ensure that you connect the grounding cable to avoid electric shock.
SAFETY INSTRUCTIONS When in Use WARNING yy Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles, etc. - This may result in fire or electric shock, or cause injury due to falling. yy In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. - This may result in electric shock.
SAFETY INSTRUCTIONS CAUTION yy Do not place heavy objects on the projector. - It may fall down and cause personal injury. yy Be careful not to allow any impact to the lens during transport. yy Do not touch the lens of the projector. - The lens may be damaged. yy Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. yy In the event that no image appears on the screen or no sound is heard, stop using the projector.
SAFETY INSTRUCTIONS yy When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial shiner, abrasives, wax, benzene, or alcohol as these can damage the projector. - This can result in fire, electric shock or cause damage to the product (deformation and corrosion). yy Remove the plug from the outlet before cleaning the product.
SAFETY INSTRUCTIONS yy Dispose of used batteries properly. - This may result in explosion or fire. The correct method of disposal may vary depending on your country or region. Dispose of the battery pack as instructed. yy Do not throw or disassemble the battery. - This may result in fire or explosion due to damage to the battery. yy Always use batteries approved and certified by LG Electronics. - This will prevent damage or fire.
CONTENTS CONTENTS LICENSE 2 SAFETY INSTRUCTIONS 3 PREPARATION 12 Accessories 12 Optional Extras 13 Parts and Components 14 Installation 16 -- Installation Precautions 16 -- Projection Distance per Screen Size 17 -- How to Install the Projector On a Tripod 18 -- Kensington Security System 18 REMOTE CONTROL 19 USING THE PROJECTOR 21 Watching Projector -- Turning on the Projector -- Focus of the Screen Image -- Watching Projector 21 21 22 22 Additional Options -- Adjusting Aspect Rati
CONTENTS CONNECTING DEVICES 61 Connecting to HD Receiver, DVD, or VCR Player, External Devices 62 -- HDMI Connection 62 -- HDMI to DVI Connection 62 -- AV Connection 63 -- Component Connection 63 Connecting a PC -- HDMI Connection -- HDMI to DVI Connection -- RGB Connection 64 64 64 65 Connecting a Laptop -- HDMI Connection 66 66 Connecting to Headphones 67 Using the Mirroring Function of a Mobile Phone 68 -- MHL/Slimport Connection 68 MAINTENANCE 69 Cleaning -- Cleaning the Lens -- Cleaning the
PREPARATION PREPARATION Accessories Accessories included with the projector are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed.
PREPARATION Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. VOL + VOL - Control Panel Vent1 Speaker Speaker Lens2 VOLVOL - - VOLVOL + + Button (POWER) (SETTINGS) VOL -, + , , , (OK) Focus ring Description Turns the projector on or off.
VOL + VOL - PREPARATION (USB Port) HDMI/MHL Port RGB IN Port A/V IN Port (Headphone Port) DC IN Port 15
PREPARATION Installation Installation Precautions yy Place the projector in a well-ventilated environment. - To prevent internal heat build-up, install the projector in a wellventilated place. Do not place anything near the projector as this may block its air vents. If the air vents are blocked, the internal temperature will increase. - Do not place the projector on a carpet or rug. If the vent is on the bottom, use the projector on a solid level surface and ensure the vent is not blocked.
PREPARATION 17 Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted.
PREPARATION How to Install the Projector On a Tripod yy You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. yy When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.
REMOTE CONTROL 19 REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION yyDo not mix new batteries with old ones. MARK VOL PAGE POWER Turns the projector on or off. USB/MY MEDIA Accesses USB mode. INPUT Changes the input source. Playback control buttons Controls playback of MY MEDIA. Key's ▲, ▼ Adjusts the Keystone function.
REMOTE CONTROL MARK VOL PAGE SETTINGS Displays or closes the Settings menu. STILL Freezes the moving image. (Available in any mode other than USB mode.) Q.MENU Allows you to change the settings easily. Up/Down/Left/Right buttons Switches between menu functions. OK Shows the current mode and saves changes to the settings. Returns to the previous screen. AUTO Automatically adjusts the RGB-PC input image. EXIT Exits the menu. Color buttons Sets detailed settings or gesture for each menu.
USING THE PROJECTOR USING THE PROJECTOR Watching Projector Turning on the Projector The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen. 1 Connect the power cord correctly. 2 After waiting for a moment, press the POWER button on the remote control or the control panel. 3 In the Language Selection screen, select a language.
USING THE PROJECTOR Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. To adjust the focus of the image, rotate the focus ring. Focus Ring Watching Projector 1 In standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want. 3 Control the projector using the following buttons while watching projector. Button VOL -, + MUTE Q.
USING THE PROJECTOR Additional Options Adjusting Aspect Ratio yy Resize an image to view at its optimal size by pressing RATIO while you are using the projector. NOTE yy Available picture size may differ depending on the input signal. yy You can also use the Q.MENU or SETTINGS button. Menu 16:9 Description Resizes images to the 16:9 ratio. Full Changes to the full screen regardless of the aspect ratio. Just Displays video images in Scan the original size without removing parts of the edge of the image.
USING THE PROJECTOR Changing input device Selecting an Input Label Displays which devices are connected to which input ports. To select an external input Selects external input. Input Label yy Press the INPUT button on the remote control to display the input selection screen. - Connected inputs are displayed first. However, AV / Component / SCREEN SHARE input is always activated. yy Select an input signal using the remote control's INPUT button to connect the projector to the desired input.
USING THE PROJECTOR Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to Selecting a Blank Image. 2 Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control. Do not block the lens with any object while the projector is running.
ENTERTAINMENT ENTERTAINMENT Using SCREEN SHARE 1 Set the external input of the projector to SCREEN SHARE. 2 Enable related SCREEN SHARE function on the device you wish to connect. 3 Connect the Projector from the search list on the device you wish to connect. (When you connect the projector to your laptop, input the PIN code shown on your display. The request for a PIN will be shown only at the initial connection.) 4 If the desired device accepts the request, SCREEN SHARE will be started.
MY MEDIA MY MEDIA Removing a USB Device Before Using 1 Click the Q.MENU button. 2 Use the or button to move Connecting a USB Device 3 Select a USB to remove. Wait for Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below. USB Flash Drive 27 to USB Device and press the OK button.
MY MEDIA Tips for Using a USB Device yy If the USB storage device has a builtin auto recognition program or uses its own driver, it may not work. yy Some USB storage devices may not work or may work incorrectly. yy If you use a USB extension cable, the USB device may not be recognized or may not work properly. yy Use only USB storage devices formatted with the Windows FAT32 or NTFS file system.
MY MEDIA To Use My Media 1 Press the SETTINGS button on the remote control. 2 Select MY MEDIA. Select desired file from the list. Watch the chosen file. Sets play related settings by checking option during disk playback. My Media supporting file yy Maximum data transfer rate: 20 Mbps (Mega bit per second) yy External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.
MY MEDIA Video Supported Codec Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640x480 @ 30p) Extension .asf, .wmv .divx, .avi .mp4, .m4v, .mov .mkv .ts, .trp, .tp, .mts, .m2ts .vob .mpg Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profiles Audio WMA Standard, WMA 9 Professional Video DivX3.11, DivX4, DivX5, DivX6, XVID, H.264/AVC Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital Video H.264 / AVC, MPEG-4 Part 2 Audio AAC Video H.
MY MEDIA Audio File File type MP3 AC3 MPEG AAC, HEAAC CDDA LPCM Item Info Bit rate 32 kbps to 320 kbps Sampling rate 32 kHz to 48 kHz Bit rate 32 kbps to 640 kbps Sampling rate 32 kHz, 44.1 kHz, 48 kHz Bit rate 32 kbps to 448 kbps Sampling rate 32 kHz to 48 kHz Bit rate 24 kbps to 3844 kbps Sampling rate 8 kHz to 96 kHz Bit rate 1.44 kbps Sampling rate 44.1 kHz Bit rate 1.41 Mbps to 9.6 Mbps Sampling rate Multi-channel : 44.1 kHz, 88.2 kHz / 48 kHz, 96 kHz Stereo : 176.
MY MEDIA Watching the Videos In the Movie List, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Tips for Playing Video Files yy Some subtitles created by users may not work properly. yy The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name.
MY MEDIA 5 Control playback by using the Browsing Movie List Play a video file stored in the connected device. following buttons. 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , or button to select Movie List and press the OK button. �� 4 Use the , , , or button to select the file you want and press the OK button. Page 1/1 Movie List USB STORAGE DEVICE book doc pic ꘧ Page Change vid Page 1/1 Butterfly_...
MY MEDIA Options for Movie List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use the , , up each item. , or Setting Subtitle Language button to set Set Video Play. Setting Picture Size Audio Language Description Selects the size of a playback screen. yy Full : Files are played in full screen mode according to the aspect ratio of video. y y Original : Displays the video in the original size.
MY MEDIA Subtitle Language Subtitle LanLanguage guage Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian Latin2 Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian, Lithuanian Cyrillic Bulgarian, Macedonian, Russian, Ukranian, Kazakh Greek Greek Turkish Turkish Hebrew Modern Hebrew Chinese Simplified Chinese Korean Korean Arabic Arabic Set Video.
MY MEDIA Registering the DivX code Checks DivX Reg. Code for replaying DivX protected videos. Register at http://vod.divx.com. Use Reg. Code to rent or purchase movies at www.divx.com/vod. 1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD. To deregister the DivX code Use the DivX deregistration code to deactivate the DivX DRM function. 1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD. 2 Use the or button to go to Deregistration and press the OK button.
MY MEDIA Viewing the Photos You can view photos stored on a connected device. Supported Photo Files PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x 8640-pixel (height) Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1440-pixel (height) yy Only JPEG files are supported. yy Non-supported files are displayed in the form of an icon. yy An error message is displayed for corrupted files or file formats that cannot be played.
MY MEDIA 5 Control playback by using the following buttons. 01_a.jpg 2008/12/10 1920 x 1080 479 KB [1/4] Slideshow BGM Setting ꔦ Q.MENU Option Hide Exit Description Selects the previous or next photo. Slide- All photos are displayed show during slide show. yy Set Slide Speed in the Option → Set Photo View. menu. BGM You can listen to music while viewing photos in full size. yy Set BGM in the Option → Set Photo View. menu. Rotates photos. yy Rotates a photo 90°, 180°, 270°, 360° clockwise.
MY MEDIA Options for Photo List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. , or button to set up Set Photo View. Setting Slide speed BGM (Background Music) Description Selects a slideshow speed. Selects a music folder for the background music. yy You cannot change the music folder while the background music is playing. yy For background music, only the folder from the same device can be selected.
MY MEDIA Listening to Music You can play audio files stored on the connected device. Supported Music Files *.MP3 Bit rate range 32 Kbps - 320 Kbps yy Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz yy Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz Browsing Music List 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , or button to select Music List and press the OK button. 4 Use the , , , or button to select the file you want and press the OK button.
MY MEDIA 5 Control playback by using the Options for Music List following buttons. Page 1/1 Music List USB STORAGE DEVICE Drive1 ꘧ Page Change Page 1/1 Butterfly_... d 01:34:33 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. 002. - B02.mp3 � �� Q.MENU Setting 02:30 / 03:25 Option Hide Exit Description Changes the playing position. Stops playing. Returns to normal playback. Pauses the media player.
MY MEDIA Viewing Files You can see document files stored on a connected device. Supported File Formats XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF Microsoft Office 97/2000/2002/2003/2007 version Adobe PDF 1.0/1.1/1.2/1.3/ 1.4 version yy File Viewer realigns a document, so it may look different from what is displayed on a PC. yy For documents that include images, the resolution may look lower during the realigning process. yy If the document is large or has many pages, it may take longer to load.
MY MEDIA 5 Control playback by using the Options for File List following buttons. yy Click Go Page then the pop-up window for selecting the number of page appears. Input the page to move to the page you want. yy Press the VOL +, - button to zoom in or zoom out. 1. Press OK. 2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom. Go Page ꔦ Zoom Q.MENU Option Hide 43 Exit Setting Description Go Moves to the page you want.
3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. While Watching 3D WARNING yy If you view 3D video or images too closely for a long period of time, your eyesight may become worse. yy If you watch the projector or game screen for a long time with 3D glasses on, you may experience dizziness or eye fatigue. yy If you are pregnant, a senior citizen, drunk, have heart problems, or easily feel motion sickness, we recommend that you do not watch 3D.
3D FUNCTION CAUTION yy Extra special care is required for children watching a 3D video. When Watching 3D Video yy Watch 3D images within the optimum viewing angle and distance. yy If you are outside the viewing angle or distance, you may not be able to see 3D images. You cannot view 3D images when you are lying down. yy You may see left and right images overlapped during projector initialization after it is powered on. It may take some time for optimization.
3D FUNCTION Requirements for Watching 3D Images * Optimum viewing angle: Top/Bottom/Left/Right 9° Recommended viewing distance: 3 m to 5 m Recommended screen size: 101 cm * Watching 3D videos should be done in dark room environments only. NOTE yy The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
3D FUNCTION 47 1 Please check the minimum system requirements for your computer. Minimum requirements are as follows: Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher More than 1 GB of system memory (2 GB recommended) Free space of 100 MB or more DirectX 9 or higher Video card should support 120 vertical frequency (Hz).
3D FUNCTION To Use DLP-LINK (DLP-Ready) Type Glasses 1 While watching 3D images from the projector, press buttons on the glasses. 2 When you press the button, the glasses flicker to be synchronized with the 3D images. (The flickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) 3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETTINGS 1 Press the SETTINGS button. 2 Use the , , , or button to select the desired item and press the OK button. 3 Use the , , , or button to set up the desired item and press the OK button. 4 Press the EXIT button when completed. Menu Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets time-related settings. WIRELESS Wireless-related features.
CUSTOMIZING SETTINGS PICTURE Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select PICTURE PICTURE and press the OK button. 3 Use the , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. 4 Press the EXIT button when completed.
CUSTOMIZING SETTINGS Item Description Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Horizontal and Vertical Sharpness are available only in Expert1/2. Color Adjusts the intensity of all colors. Tint Adjusts the balance between red and green levels. Advanced Customizes the advanced settings. Control Picture Sets optional settings.
CUSTOMIZING SETTINGS Advanced Control Item Dynamic Contrast Dynamic Color Color Gamut Description Adjusts contrast and colour to the optimal level according to the screen’s brightness. Adjusts colours for more natural-looking colours. Selects the range of colours that can be expressed. yy Standard: Displays the original colors of an input signal regardless of the display features. yy Wide: Makes use of the display's rich colors.
CUSTOMIZING SETTINGS Item Description Color In Expert mode, you can customize the options of each mode. Temperature Gamma: Select 1.9, 2.2, or 2.4. a. M ethod: 2 points - Pattern: Inner, Outer - Points: Low, High -R ed/Green/Blue: Adjustable range -50 ~ +50. - Apply to all inputs: T he values of the Color Temperature is applied to all the input modes. b.
CUSTOMIZING SETTINGS Picture Option Item Description Noise Reduction Reduces screen noise in the video. MPEG Noise Reduction Eliminates noise generated while creating digital picture signals. Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen. Real Cinema Optimizes the screen for movie viewing. Color Temperature Adjusts the overall color of the screen to suit your preference.
CUSTOMIZING SETTINGS 55 AUDIO Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select AUDIO and press the OK button. AUDIO yySound Mode ꔂ Move ꔉ OK : Standard yySound Effect 3 Use the , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. yyAuto Volume : Off 4 Press the EXIT button when completed. The available sound settings are described as follows.
CUSTOMIZING SETTINGS TIME Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select TIME and press the OK button. 3 Use the , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. TIME ꔂ Move ꔉ OK yySleep Timer : Off yyAuto Off : 60 min. yyAutomatic Standby : 4 hours 4 Press the EXIT button when completed. The available time settings are described as follows.
CUSTOMIZING SETTINGS 57 WIRELESS Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select WIRELESS yySCREEN SHARE WIRELESS and press the OK button. ꔂ Move ꔉ OK : [PJTR][LG][0000] yyGroup 3 Use the , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. yyChannel 4 Press the EXIT button when completed. The available wireless settings are described as follows.
CUSTOMIZING SETTINGS OPTION 1 Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select OPTION 1 ꔂ Move ꔉ OK yyLanguage OPTION 1 and press the OK button. yy3D Mode 3 Use the yyAuto Input Search : Off , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. yyStandby Light : On yyDivX(R) VOD yyInitial Setting 4 Press the EXIT button when completed. The available option 1 settings are described as follows.
CUSTOMIZING SETTINGS 59 OPTION 2 Settings 1 Press the SETTINGS button. 2 Use the , , , or button to select OPTION 2 ꔂ Move ꔉ OK yyKeystone OPTION 2 and press the OK button. 3 Use the , , , or button to set up the desired item and press the OK button. - To return to the previous menu, press the button. yyAuto Keystone : On yyPJT Mode : Front yyHigh Altitude : Off yyBlank Image : Blue yyAuto Power : On yySelf Diagnosis 4 Press the EXIT button when completed.
CUSTOMIZING SETTINGS Item Auto Power Description Makes the projector turn on automatically when the adaptor plug is inserted. Item On Off Self Diagnosis When the AC/DC plug is connected to the projector, it turns on automatically. When the AC/DC plug is connected to the projector, it goes into standby mode. Troubleshoots functional problems that can arise while using the product.
CONNECTING DEVICES 61 CONNECTING DEVICES You can connect various external devices to the projector.
CONNECTING DEVICES Connecting to HD Receiver, DVD, or VCR Player, External Devices * Optional Extras * Optional Extras VOL - VOL - VOL + VOL - With an HDMI cable, you can enjoy high quality picture and sound. Using a HDMI cable, connect the HDMI/ MHL port of the projector to the HDMI output port of the device to connect. Both video and audio are output at the same time. Press the INPUT button on the remote control to select HDMI.
CONNECTING DEVICES 63 Component Connection Connect the output ports of an external device and the A/V IN ports of the projector using an AV cable. Press the INPUT button on the remote control to select AV. Check whether cables of the same color are connected properly. You can enjoy a video by connecting the Component port of an external device to the RGB IN port of the projector. Press the INPUT button on the remote control to select Component.
CONNECTING DEVICES Connecting a PC HDMI to DVI Connection The projector supports Plug & Play. Your PC will automatically detect the projector and requires no driver installation. HDMI Connection VOL - VOL - VOL - VOL + VOL + VOL - VOL + VOL + VOL + Using an HDMI cable, connect the HDMI/MHL port of the projector to the HDMI output port of your PC. Both video and audio are output at the same time. Press the INPUT button on the remote control to select HDMI.
CONNECTING DEVICES 65 VOL - VOL - VOL + VOL + VOL + Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. Press the INPUT button on the remote control to select RGB-PC.
CONNECTING DEVICES Connecting a Laptop You can connect the projector to a laptop to use various functions. HDMI Connection VOL + VOL - VOL + VOL - Using an HDMI cable, connect the HDMI/MHL port of the projector to the HDMI output port of your laptop. Both video and audio are output at the same time. Press the INPUT button on the remote control to select HDMI. The table below shows examples of switching the output.
CONNECTING DEVICES Connecting to Headphones VOL + VOL - You can listen to the audio through a headphone.
CONNECTING DEVICES Using the Mirroring Function of a Mobile Phone MHL/Slimport Connection You must use a HDMI adapter to connect your cell phone to the projector and to output images and sound from your cell phone to the projector. The compatible HDMI adapters are different, depending upon your cell phone type. Therefore, purchase an appropriate MHL or Slimport adapter. (To find out whether your device is MHL/Slimport-certified, please contact your device manufacturer.
MAINTENANCE MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of cleaning agent onto a swab or soft cloth to lightly rub the lens. Please be aware that liquid may flow into the lens if the product is sprayed directly onto the lens.
SPECIFICATIONS SPECIFICATIONS MODELS Resolution (Pixel) Aspect ratio Panel size (mm) Projection distance (Video size) Ratio of upward projection Working range of the remote control Video input AC-DC Adaptor Audio Output Height (mm) Width (mm) Depth (mm) Weight (g) USB Device Operation environment PA1000 (PA1000-GL) / PA1000W (PA1000W-GL) 1280 (Horizontal) × 800 (Vertical) 16:10 (Horizontal:Vertical) 11.623 0.90 m to 3.06 m (76.2 cm to 254.
SPECIFICATIONS 71 Supported Monitor Display Supported HDMI/DVI-DTV Mode Horizontal Resolution Frequency (kHz) Horizontal Vertical Resolution Frequency Frequency (kHz) (Hz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 97.551 60.00 119.99 1152 x 864 54.348 60.053 1280 x 800 49.68 60 1360 x 768 47.712 60.015 1280 x 1024 63.981 60.020 1400 x 1050 65.317 59.979 1680 x 1050 65.
SPECIFICATIONS Open Source Software Information To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service.
