User guide

22
USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and ts the screen
properly.
To adjust the focus of the image, rotate the focus ring.
Focus Ring
Watching Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching projector.
Button Description
VOL -, + Adjusts the volume level.
MUTE Mutes all sounds.
Q.MENU Accesses the quick menu. (see page 25)
RATIO Resizes an image.
Key's , Adjusts Keystone. (see page 23)
4 To turn the projector off, press the POWER button.