User guide

7
SAFETY INSTRUCTIONS
CAUTION

Do not place heavy objects on the
projector.
- It may fall down and cause personal
injury.

Be careful not to allow any impact to
the lens during transport.

Do not touch the lens of the projector.
- The lens may be damaged.

Do not use any sharp tools on the
projector such as a knife or hammer,
because this may damage the casing.

In the event that no image appears
on the screen or no sound is heard,
stop using the projector. Switch off
the projector, unplug it from the power
outlet and contact our service center.
- This may result in fire or electric
shock.

Do not drop anything onto the
projector or allow anything to bang
into the projector.
- This may cause damage to the
projector or personal injury.

It is recommended that you maintain
a distance of more than 5 - 7 times
the diagonal length of the screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.

Do not block the light beam emitted
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition,
the lens may be overheated and
damaged by the reflected heat.

Do not start the projector with the
volume turned up high.
- High volume may damage hearing.

Do not use high voltage electrical
equipment near the projector, (e.g.
bug zapper). This may result in
product malfunction.
Cleaning
WARNING

Do not spray the projector with
water when cleaning. Make sure water
does not flow into the projector .
- This may result in fire or electric
shock.

When there is smoke or a strange
smell coming out from the projector or
a foreign object falls into the pro jector,
switch it off and unplug it from the
power outlet and contact our service
center.
- Otherwise, this may result in fire or
electric shock.

Use air spray, a soft cloth or
a cotton swab moistened with a
lens cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
CAUTION

Contact your seller or our service
center once a year to clean the inter-
nal parts of the projector.
- If you do not clean the projector for
a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.