How to Guide

33
ENGLISH
Battery using time information
Status Time and Display
Charging About 3 hours (When in standby and charging)
Usage Hours
Up to 2.5 hours
(Available battery using time up to 2.5 hours when Energy
Saving mode set to Max.)
Battery Level
Indicator
Step 1 Step 2 Step 3 Step 4 Step 5 Full
• Check the battery level in the upper right corner of the screen by pressing the
button on the remote control.
• If you do not intend to use the projector for a long time, leave the battery
charged at 40 % to 50 % ( ).
• The battery is automatically recharged when the projector is connected to a
power supply.
• Charge the battery fully when you first use the projector.
• The battery standard usage time given in the manual is based on measurements
taken by LG; the actual time may vary depending upon usage.
• Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
• As the battery is consumable, its lifetime gradually decreases. When the
battery’s life is reduced by half, replace it with a new battery from an LG
Electronics Customer Support Center.
• Do not store or transport at pressures lower than 11.6 kPa (1.68 psi) and at
above 15 000 m (49212.5 feet) altitude.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for
example, in the case of some lithium battery types).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion
or the leakage of flammable liquid or gas.
• Remove the power cable in places that are not suitable for use of the product.