Owner's Manual DLP PROJECTOR Please read this manual carefully before operating your projector and retain it for future reference. PG60G www.lg.com (Brazil : www.lge.
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lge.com/br. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ING/CAUTION ELECTRIC SHOCK O NOT OPEN SAFETY INSTRUCTIONS 3 SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. yySafety precautions are given in two forms, i.e. WARNING and CAUTION as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product.
SAFETY INSTRUCTIONS yyDo not install the product onto a wall or ceiling that is close to sources of oil or oil mist. - The product may be damaged and fall, resulting in serious injury. yyDo not place the projector where it might be exposed to excessive dust. - This may cause a fire. yyDo not use the projector in a damp place such as a bathroom where it is likely to get wet. - This may cause a fire or an electric shock. yyDo not allow a tablecloth or curtain to block the vents.
SAFETY INSTRUCTIONS CAUTION yyHold the plug firmly when unplugging. - A broken wire in the cord may cause a fire. yyEnsure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet. - This may cause a fire or an electric shock. yyKeep the power cord away from any heating devices. - The cord coating may melt and cause an electric shock.
SAFETY INSTRUCTIONS yyDo not look directly into the lens when the projector is in use. The strong light may damage your eyes. yyWhen the lamp is on or has just been turned off, avoid touching the air vent or lamp because these will be very hot. yyIf there is a gas leak, do not touch the wall outlet. Open the window for ventilation. - A spark may cause a fire or burn. yyNever touch the projector or power cord during thunder or lightning. - This may cause an electric shock.
SAFETY INSTRUCTIONS Cleaning WARNING yyDo not spray the projector with water when cleaning. Do not allow water to go into the projector or do not allow it to get wet. - This may cause a fire or an electric shock. yyWhen there is smoke or a strange smell coming out from the projector or a foreign object falls into the projector, please switch it off and unplug it from the power outlet and contact an LG Electronics Service Center. - If not, this may cause a fire or an electric shock.
SAFETY INSTRUCTIONS CAUTION yyUnplug the power cord if the projector is not used for a long period. - Accumulated dust may cause overheating, an electric shock from corroded insulation and a fire from an electrical surge. yyOnly use the specified type of battery. - Otherwise, this may cause an electric shock caused by overheating and leakage. yyMake sure you use the same type of battery when replacing.
CONTENTS 9 CONTENTS LICENSES 2 SAFETY INSTRUCTIONS 3 PREPARATION 10 Accessories Optional Extras Parts and Components Installation -- Installation Precautions -- Connecting an adapter -- Projection Distance per Screen Size -- Using the Lens Hood -- Using the Cradle scene -- Connecting a battery -- How to Install the Projector On a Tripod -- Kensington Security System 10 11 12 13 13 13 14 15 15 16 REMOTE CONTROL 19 USING THE PROJECTOR 21 Watching the Projector -- Turning on the Projector -- Focu
PREPARATION PREPARATION Accessories Check enclosed accessories. The picture may be different from an actual product. 219'4 +0276 /76' 2#)' 81.7/' #761 $.#01- ':+6ꕯ ꕣ 5'66+0)5 3 /'07 56+.. 4#6+1 *'.
PREPARATION 11 Optional Extras To purchase optional extras, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Without prior notice, optional extras are subject to change in order to improve the performance of the product, and new accessories may be added.
PREPARATION Parts and Components * The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. When powered on, the LED of the control panel turns on.
PREPARATION Installation Installation Precautions yyPlace the projector in a well-ventilated environment. - To prevent internal heat from building up, install the projector in a well-ventilated place. Do not place anything near the projector as this may block the air vents. If the air vents are blocked, the i nternal temperature will increase. - Do not place the projector on a carpet or rug. Do not block any vents on the bottom and use the projector on a leveled solid surface.
PREPARATION Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector at an appropriate distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the image on the screen will be tilted and the image quality will be poor.
PREPARATION Using the Lens Hood Turn the lens hood as shown by the arrow. ⇒ NOTE yy Be careful not to use excessive force when mounting the lens hood. Failure to do so may damage the product. DC IN DC IN DC IN Normal Scene DC IN Using the Cradle scene Top Scene NOTE yy When projecting images onto the ceiling, you must only use the provided angle-type antenna cable and USB storage device. yy For HDMI connections, use an HDMI cable that matches the projector HDMI input port.
PREPARATION Connecting a battery 1 Remove the cover. Cover 2 Assemble the projector as shown. ⇒ 3 Turn the knob as shown by the arrow.
PREPARATION How to Install the Projector On a Tripod yyYou can install this projector on a camera tripod as shown below. yyWhen stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.) Bottom side of the projector Bolt used to attach the projector The projector is connected to this part.
PREPARATION Kensington Security System yyThis projector has a Kensington Security System Connector on the panel. Connect a Kensington Security System cable as below. yyFor detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Security System set. yyThe Kensington Security System is an optional item.
REMOTE CONTROL REMOTE CONTROL Open the battery cover on the back of the remote control and insert the specified batteries as per instructions . The same type of batteries must be used. 219'4 +0276 /76' ① ② POWER Turns the projector on or off. INPUT Changes the input source. MUTE Mutes all sounds. VOLUME +, Adjusts the volume level. PAGE Moves to the previous/next page. 2#)' 81.7/' #761 $.#01- ':+6ꕯ ꕣ 5'66+0)5 3 /'07 56+.. 4#6+1 *'.
REMOTE CONTROL 219'4 +0276 /76' 2#)' 81.7/' #761 $.#01- ':+6ꕯ ꕣ 5'66+0)5 3 /'07 56+.. 4#6+1 *'.2 -'; 5 75$ -'; 5 STILL Freezes the moving image. (Available in any mode other than USB mode.) RATIO Resizes an image. USB Accesses USB mode. HELP Enables the self-diagnosis. KEY.S u, v Adjusts Keystone. Playback Control Buttons Controls playback of MY MEDIA. Color buttons Access special functions in some menus.
USING THE PROJECTOR 21 USING THE PROJECTOR Watching the Projector Turning on the Projector 1 Connect the power cord correctly. 2 After waiting for a moment, press the POWER button on the remote control or the control panel. (The light on the control panel will be turned on.) 3 In the Language Selection screen, select a language. 4 Select an input signal by using the INPUT button on the remote control.
USING THE PROJECTOR Using the battery Low battery! The projector will turn off soon * It is displayed when the battery is running out. *A s your bettery is low, the projector will be turned off in a minute. Battery using time information Status Time and Display Charging About 3 hours Usage Hours About 2 hour (Available battery using time About 2 hour when Energy Saving mode set to Max. Changing the Energy Saving mode default values will reduce battery life.
USING THE PROJECTOR 23 * Dispose of the used battery appropriately. Failure to do so may result in an explosion or fire. Methods for disposing of batteries vary depending on your country or region. Ensure the battery is disposed of in accordance with applicable laws and regulations. * Do not throw or disassemble the battery. Damage to the battery may result in fire or an explosion. * Always use a battery that is approved and certified by LG Electronics, Inc.
USING THE PROJECTOR Using Additional Options Adjusting Aspect Ratio You can adjust the aspect ratio of the picture by pressing RATIO while watching projector. NOTE yyAvailable options may vary depending on the input signal. yyYou can also change the image size by pressing Q.MENU or SETTINGS. - - - 16:9: Resizes images to fit the screen width. FULL: Changes to the full screen regardless of the aspect ratio. Just Scan: Displays video images in the original size without cutting off the edges.
USING THE PROJECTOR Using the Keystone Function Using the Input List To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. •Keystone  0 - 25 Using the Input List 1 Press the INPUT button to access the input sources.
USING THE PROJECTOR Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 2 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting a Blank Image". Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control.
ENTERTAINMENT 27 ENTERTAINMENT Using SCREEN SHARE 1 Enable related SCREEN SHARE function on the device you wish to connect. 2 Connect the Projector from the search list on the device you wish to connect. (When you connect the projector to your laptop, input the PIN code shown on your display. The request for a PIN will be shown only at the initial connection.) 3 If the desired device accepts the request, SCREEN SHARE will be started. CAUTION yyWindows 7 / 8 / 8.1 are compatible with SCREEN SHARE.
ENTERTAINMENT MY MEDIA Connecting USB Storage Devices Connect a USB flash drive as shown below. When a USB storage device is connected, the USB adjustment screen appears. You cannot write or delete data on the USB storage device. To disconnect the USB storage device, 1 Press the Q.MENU button. 2 Use the ︿ or ﹀ button to move to USB Device and press the OK button. 3 Remove the USB device. NOTE USB flash drive  yyAfter the USB storage device is disconnected, it cannot be read.
ENTERTAINMENT Tips for Using USB Devices yyOnly a USB storage device is recognizable. yyUSB hubs are not supported. yyA USB storage device which uses its own driver may not be recognized. yyThe recognition speed of a USB storage device will depend on each device. yyIf a normal USB device does not work, disconnect and reconnect it. Please do not turn off the projector or unplug the USB device when the connected USB device is working. The USB device or stored files may be damaged.
ENTERTAINMENT MOVIE LIST In the Movie List, you can watch movies stored on the connected USB device. Tips for Playing Video Files yySome subtitles created by a user may not work. yySome special characters are not supported in subtitles. yyHTML tags are not supported in subtitles. yyTime information in a subtitle file should be arranged in ascending order to play the subtitle properly. yyChanging font and color in subtitles is not supported.
ENTERTAINMENT 31 Supported Video Formats File Extensions .asf .wmv Audio/ Video Video Audio Video .divx .avi Audio .mp4 .m4v Video Audio Video .mkv Audio Video .ts .trp .tp Audio Video .vob Audio .mpg .mpeg .mpe Video Audio Codec Profile/Level Support Advanced Profile @ Level 3 (e.g.720p60, 1080i60, 1080p30) VC-1 Advanced Profile Only streams compliant to SMPTE 421M VC-1 standard are supported. Simple Profile @ Medium Level (e.g.CIF,QVGA) VC-1 Simple Main Profile @ High Level (e.g.
ENTERTAINMENT Supported Audio Files No Audio Codec Bit rate Sampling rate 1 MP3 32 kbps - 320 kbps 32 kHz - 48 kHz 2 AC3 32 kbps - 640 kbps 32 kHz, 44.1 kHz, 48 kHz 3 MPEG 32 kbps - 448 kbps 32 kHz - 48 kHz 4 AAC,HEAAC 24 kbps - 3844 kbps 8 kHz - 96 kHz 5 CDDA 1.44 kbps 6 LPCM Multi-channel : 44.1 kHz, 1.41 Mbps - 9.6 Mbps 88.2 kHz/ 48 kHz, 96 kHz Stereo : 176.4 kHz, 192 kHz 44.
ENTERTAINMENT 6 Control playback by using the Browsing Movie List Play a video file stored from a connected device. 1 Connect a USB storage device. 2 Press the SETTINGS button. 3 Accesses the MY MEDIA. 4 Use the ︿, ﹀, ︿ or ﹀ button to select the file you want and press the OK button. Page 1/1 Movie List USB STORAGE DEVICE d ❺ ❸ ❹ book doc pic ꘧ Page Change vid Page 1/1 Butterfly_... 01:34:33 ꔅ Go to root folder ꔅ Go to upper folder ꕣ Exit ❻ ❼ ❽ 01:02:30 / 02:30:25 Q.
ENTERTAINMENT Options for Movie List 1 Press the Q.MENU button. 2 Use the ︿ or ﹀ button to move to a Setting Description Repeat Turns the repeat function on or off. When it is set to off, the next file can be played sequentially if the file name is similar. 3 Use ︿, ﹀, ︿ or ﹀ button to set up yySubtitle Language desired option and press the OK button. each item. Set Video Play. Setting Description Picture Selects the size of a playback Size screen.
ENTERTAINMENT Registering the DivX code 35 To deregister the DivX code Please check your DivX code. For more information on the registration process, visit www.divx.com/vod. After registration, your can enjoy DivX VOD content protected by the DivX DRM code. Use the DivX deregistration code to deactivate the DivX DRM function. 1 2 Move to OPTION and press DivX(R) Press SETTINGS button to enter Setup menu. 2 Move to OPTION and press DivX(R) VOD.
ENTERTAINMENT PHOTO LIST You can see the photos stored on a connected device. Supported Photo Files PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x 8640-pixel (height) Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1440-pixel (height) yyOnly JPEG files are supported. yyNon-supported files are displayed in the form of an icon. yyAn error message is displayed for corrupted files or file formats that cannot be played.
ENTERTAINMENT 6 Control playback by using the Setting Description Hide Hides the menu on the full size screen. yyTo see the menu, press the OK button on the remote control. following buttons.  01_a.jpg 2008/12/10 1920 x 1080 479 KB [1/4] Exit Slideshow BGM Setting Slideshow ꔦ Q.MENU Option Hide Exit Description Selects the previous or next photo. All photos are displayed during slide show. yySet the time interval of the slide show in Option → Set Photo View menu.
ENTERTAINMENT Options for Photo List 1 Press the Q.MENU button. 2 Use the ︿ or ﹀ button to move to a desired option and press the OK button. 3 Use ︿, ﹀, ︿ or ﹀ button to set up each item. Set Photo View. Setting Description Slide Selects a slideshow speed. speed BGM Selects a music folder for (Backthe background music. yyYou cannot change the ground music folder while the Music) background music is playing. yyFor background music, only the folder from the same device can be selected.
ENTERTAINMENT Description ❶ Thumbnails Abnormal file Setting Description Hide Hides the playback bar. yyPress the OK button to make the playback bar appear. Exit File not supported ❷ File List ❸ Moves to the upper level folder. ❹ Current page/Total no. of folder pages ❺ Current page/Total no. of file pages ❻ Moves to the top level folder. ❼ Moves to the upper level folder. ❽ Exit 6 Control playback by using the following buttons.
ENTERTAINMENT FILE LIST ❶ You can see document files stored on a connected device. Supported File Formats ❷ File List USB STORAGE DEVICE d DOC PPT HWP Butterfly_... 06/09/2010 TXT ❹ ❸ Page 1/1 ꘧ Page Change Drive1 Page 1/1 PDF XLS XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF Microsoft Office 97/ 2000/ 2002/ 2003/ 2007 ꔅ Go to root folder ꔅ Go to upper folder ꕣ Exit ❺ ❻ ❼ Adobe PDF 1.0/ 1.1/ 1.2/ 1.3/ 1.
ENTERTAINMENT 6 Control playback by using the following buttons. yyClick Go Page then the pop-up window for selecting the number of page appears. yyInput the page to move to the page you want. yyPress the volume button to zoom in or zoom out. 1. Press OK. 2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom.  Go Page ꔦ Zoom Q.MENU Option Hide Exit Setting Description Go Moves to the page you want. Page Use the Up/Down/Left/Right buttons to select a page and press the OK button.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETUP Menu 1 Press the SETTINGS button. 2 Use the ︿, ﹀, ︿ or ﹀ button to select a desired item and press the OK button. 3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired item and press the OK button. 4 When you finished, press EXIT. Menu Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets the time and time-related features. OPTION Customizes the general settings.
CUSTOMIZING SETTINGS 43 PICTURE Settings 1 Press the SETTINGS button. 2 Use the ︿, ﹀, ︿ or ﹀ button to select PICTURE and press the OK button. 3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired item and press the OK button. -T o return to the previous menu, press the ꕣ button. PICTURE ꔂ Move ꔉ OK • Energy Saving : Medium • Picture Mode : Eco • Contrast 50 • Brightness 50 • Sharpness 5 • Color 70 • Tint 0 G R 4 Press the EXIT button when completed.
CUSTOMIZING SETTINGS Setting Picture Option Picture Reset Aspect Ratio Screen (RGB-PC) Description Sets optional settings. Restores the options of each mode to the factory default. Changes the image size to view images at its optimal size. Adjusts the picture quality of RGB-PC input. Option Resolution Available resolutions are 768 resolution (1024 x 768/ 1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution (1400 x 1050/ 1680 x 1050, 60 Hz).
CUSTOMIZING SETTINGS 45 Expert Control Setting Dynamic Contrast Color Gamut Description Adjusts the contrast to keep it at the best level for the brightness of the screen. Selects the range of colors to display. yyStandard: Displays the original colors of an input signal regardless of the display features. yyWide: Sets to use the rich colors of the display. Edge Enhancer Provides much sharper and clearer edges to the picture.
CUSTOMIZING SETTINGS Picture Option Setting Description Noise Reduction Removes noises in the picture. MPEG Noise Reduction Reduces the noise produced while creating digital video signals. Black Level Compensates the brightness and contrast of a screen to balance with the black level of the video input. Real Cinema Provides optimal picture quality for watching a movie. Color Temperature Adjusts the overall color of the screen to suit your preference.
CUSTOMIZING SETTINGS 47 AUDIO Settings 1 Press the SETTINGS button. 2 Use the ︿, ﹀, ︿ or ﹀ buttons to select AUDIO and press the OK button. 3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired AUDIO • Sound Mode ꔂ Move ꔉ OK : Standard • Clear Voice II : Off ꕅ 3 • Auto Volume : Off item and press the OK button. -T o return to the previous menu, press the ꕣ button. 4 Press the EXIT button when completed. The available audio settings are described as follows.
CUSTOMIZING SETTINGS TIME Settings 1 Press the SETTINGS button. 2 Use the ︿, ﹀, ︿ or ﹀ button to select TIME and press the OK button. 3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired TIME ꔂ Move ꔉ OK • Sleep Timer : Off • Auto Off : 60 min. • Automatic Standby : Off item and press the OK button. -T o return to the previous menu, press the ꕣ button. 4 Press the EXIT button when completed. The available time settings are described as follows.
CUSTOMIZING SETTINGS 49 OPTION Settings 1 Press the SETTINGS button. 2 Use the ︿, ﹀, ︿ or ﹀ button to select OPTION and press the OK button. 3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired item and press the OK button. -T o return to the previous menu, press the ꕣ button. OPTION ꔂ Move ꔉ OK • Language • SCREEN SHARE : [PJTR][LG]PG6XX[0000] • • • • • Channel : Off 1 : On : Front • Group Caption KeyStone Auto Keystone PJT Mode 4 Press the EXIT button when completed.
CUSTOMIZING SETTINGS Setting Description PJT Mode This function turns the projected image upside down or flips horizontal. yySelect Rear when projecting from the back of the transparent screen purchased separately. yySelect Ceiling when installing the product on the ceiling. yyWhen PJT Mode is Front/Front Ceiling/Rear/Rear Ceiling, the left/ right of the speaker changes automatically. Blank Image Selects a background for blank Image.
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the ports on the projector.
MAKING CONNECTIONS Connecting to an HD Receiver, DVD Player or VCR Connect an HD receiver, DVD Player or VCR to the projector and select an appropriate input mode. HDMI Connection With an HDMI cable, you can enjoy high quality picture and sound. Press the INPUT button on the remote control to select HDMI. Connecting to a PC The projector supports Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed.
MAKING CONNECTIONS 53 Connecting to the AV INPUT Connect the output ports of an external device and the AV INPUT port of the projector. Press the INPUT button to select AV.
MAKING CONNECTIONS Component Connection You can enjoy vivid images when you connect an external device with a RGB IN port to the component port of the A/V IN projector. Press the INPUT button on the remote control to select Component. Connecting to Headphones You can listen to the audio through a headphone.
MAINTENANCE MHL Connection MAINTENANCE Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to projector sets. Clean your projector to keep it in optimum condition. Cleaning the Projector Cleaning the Lens A/V IN A/V IN HDMI/DVI 55 HDMI/DVI RGB IN RGB IN IN 2 (MHL) If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens.
SPECIFICATIONS SPECIFICATIONS MODELS Resolution (Pixel) Aspect ratio Panel size (mm) Projection distance (Video size) Ratio of upward projection Working range of the remote control Video input AC-DC Adaptor Audio Output Height (mm) PG60G (PG60G-JE) 1280 (Horizontal) × 800 (Vertical) 16:10 (Horizontal:Vertical) 11.623 0.80 m - 3.25 m (63.5 cm - 254.0 cm) 100 % 3m NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 / SECAM 90 W (19.5 V , 4.62 A) / 110 W (19.0 V , 5.
SPECIFICATIONS Supported Monitor Display 57 HDMI/DVI-DTV supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.469 31.5 59.94 60 Resolution 640 x 480 31.469 59.94 720 x 576 31.25 50 800 x 600 37.879 60.31 1280 x 720 1024 x 768 48.363 60.00 119.99 37.5 44.96 45 50 59.94 60 1152 x 864 54.348 60.053 1920 x 1080 33.72 33.75 28.125 26.97 27 33.
SPECIFICATIONS Component port connecting information Signal Component 480i / 576i o 480p / 576p o 720p / 1080i o 1080p o (50 Hz / 60 Hz only) Open Source Software Information To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service.
