DLP Projection TV OWNER’S MANUAL 52SX4D / 62SX4D MODELS: 52SX4D-UB / 62SX4D-UB R TruSurround XT TM Please read this manual carefully and completely before operating your TV. Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below. See the label attached on the back cover and relate this information to your dealer if you require service. Model Number : Serial Number : LG Electronics U.S.A., Inc.
Warning/Caution Warning/Caution WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
TV Guide On Screen Notices for U.S.A. Trademark Notice In the United States, TV GUIDE and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates. In Canada, TV GUIDE is a registered mark of Transcontinental Inc., and is used under license by Gemstar-TV Guide International, Inc. Aux Etats Unis TV GUIDE et d’autres marques relatives sont des marques déposées de Gemstar-TV Guide International, Inc. et/ou d’une de ses sociétés affiliées.
Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Contents Contents Warnings/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Digital Cable Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4~5 Introduction Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Connection Options . . . . . . . . . . . . . . . . . . . .8~9 Remote Control Key Functions . . . . . . . . . .10~11 Installation External Equipment Connections . . .
Introduction Introduction Owner’s Manual 7
Introduction UPGRADE PORT RGB PC/DTV (XGA/ 480p/ 720p 1080i) RGB/DVI Y PB PR PC/DTV (XGA/ 480p/ 720p / 1080i) DVI 8 DLP Projection TV DTV/DVD
Introduction Front Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front connection panel. To use the side jacks as the signal source, select them using Main Input menu as described on page 61.
Introduction Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT TV/VIDEO MODE Brings up the menu to select the Photo or Music mode of Xstudio for memory cards. DAY DAY - /VCR/DVD control buttons • Use for Photo mode or Music mode of .(Refer to p.81~ 85) • Controls the DVHS or Camcorder in • IEEE 1394 mode.
Introduction TV INPUT • Rotates the input mode between Antenna and Cable. • Video 1-2, Front Video, Component 1-2, RGB-DTV (or RGB-PC), HDMI1/DVI, HDMI2 and IEEE1394 input sources, TV will return to the last TV channel. TV INPUT TV/VIDEO MODE Selects the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. Select other operating modes, for the remote to operate external devices. MODE DAY DAY - + TV GUIDE Brings up the TV Guide On Screen system to the screen.
Installation Antenna or Cable Connection 1. Analog and Digital TV signals provided on antenna - Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. ANTENNA 2.
3. Analog and Digital TV signals provided on cable and antenna Antenna Bronze Wire RF Coaxial Wire (75 ohm) Cable TV Wall Jack Turn clockwise to tighten. RF Coaxial Wire (75 ohm) • To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. • If the antenna needs to be split for two TV’s, install a “2Way Signal Splitter” in the connections. ANTENNA • If the antenna is not installed properly, contact your dealer for assistance.
Installation External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). RGB INPUT PC/DTV (XGA /480p /720p /1080i) RGB/DVI INPUT S-VIDEO MONITOR VIDEO OUTPUT INPUT2 VIDEO INPUT1 VIDEO (L) How to use AUDIO 1.
Installation CableCARDTM Setup How to use Insert the CableCARDTM received from the cable service provider to the CableCARDTM slot of TV back panel. If the pairing information about this TV and the CableCARD is automatically displayed on the screen, contact with the cable service provider by phone. Note : • CableCARDTM have the types of Motorola, Scientific Atlanta, SCM etc.. These 3 types of CableCARDTM can be used for this DLP Projection TV.
Installation PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly. How to connect 1. Connect the PC to HDMI1/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product).
Installation Digital Audio Output Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. 3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer to page 64. See the external audio equipment instruction manual for operation.
Installation HDMI - HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution.
Installation Reference Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo to RCA type) (not supplied with the product) Owner’s Manual 19
Installation How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET. 2. Turn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3. Select HDMI1/DVI Input source in Main Input option on the SETUP menu.(Refer to P.61) 4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI1/DVI Source Devices.
Installation Owner’s Manual 21
Installation ANTENNA G-LINK UPGRADE DIGITAL AUDIO OPTICAL OUTPUT PORT RGB INPUT C A B L E C A R D DIGITAL AUDIO OPTICAL INPUT1 (COMPONENT2) CABLE DIGITAL AUDIO OPTICAL INPUT2 (DVI) COMPONENT INPUT2 INPUT1 PC/DTV (XGA /480p /720p /1080i) S-VIDEO MONITOR VIDEO OUTPUT INPUT2 RGB/DVI INPUT VIDEO INPUT1 VIDEO (L) Y AUDIO (R) IEEE-1394 (L) PB AUDIO MONO (R) HDMI1 /DVI PR (L) (L) AUDIO AUDIO (R) (R) VARIABLE HDMI2 AUDIO OUT DTV/DVD INPUT ANT OUT OUT ANT IN (R) AUDIO (L) OUTPUT
Installation Note: The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 21~22 for G-LINK connection instructions. TV Guide On Screen Setup 1.Welcome Screen The TV Guide On Screen system's Welcome Screen appears: -- by pressing the TV Guide key -- when you power On your TV if you previously skipped "Set up TV Guide On Screen now" on the Reminder Screen. The Welcome Screen highlights features of the TV Guide On Screen system.
Installation 2. Screen 2: Enter Zip or Postal Code Option 1 • If you selected USA in Screen 1, you see the ZIP Code screen. • You input numbers by either pressing the number keys on the remote or using the D / E button to display a number, and then the ton to move to another field. F /G but- • Press ENTER to display Screen 3. Option 2 • If you selected Canada in Screen 1, you see the Postal Code screen.
Installation 5. Screen 5: Which TV input is the cable box plugged into? • If you select Cable, you see Screen 6. • If you make any other choice, you see Screen 7 . 6. Screen 6: Cable Box Tuning Channel • Select the channel used for the cable box. • Press ENTER to display Screen 7. 7. Screen 7: Cable Box Configuration Diagram • The diagram shows the correct way to install the G-LINK Cable from the back of the device to the cable box. Make sure the G-LINKTM Cable is properly installed.
Installation 8. Screen 8: Cable Box Brand Name • Use the D / E button to select a cable box brand. • Press ENTER to display Screen 9. 9. Screen 9: Cable Box Preparation • Follow the on-screen instructions, and press ENTER to display Screen 10. 10. Screen 10: Cable Box Code Testing • When testing is done, Screen 11 displays automatically. 11. Screen 11: Cable Box Tuned to Channel 9? • If you select Yes, you see Screen 12. • If you select No, a different code is tested in Screen 10.
Installation 12. Screen 12: Do you have an antenna connected? • If you select Yes, you see Screen 13. Note: • If you selected No in Screen 3 then you must select Yes in this screen to receive a channel lineup and listings. • If you select No, you see Screen 13. 13. Screen 13: Are your basic settings correct? • If you select Yes, you see Screen 14. • If you select No, you see Screen 1. 14. Screen 14: Congratulations • Press ENTER to display Screen 15.
Installation 15. Screen 15: Is a VCR Connected? • If you select Yes, you see Screen 16. • If you select No, you see Screen 21. 16. Screen 16: VCR Configuration Diagram • This screen shows the correct way to install the G-LINKTM Cable from the back of the TV to the Recording device. Make sure the G-LINKTM Cable is properly installed. • Press ENTER, and you see Screen 17. 17. Screen 17: VCR Brand Name • Use the D / E button to select the brand of the recording device. • Press ENTER, and you see Screen 18.
Installation 18. Screen 18: VCR Preparation • Follow the on-screen instructions, and press ENTER to display Screen 19. 19. Screen 19: VCR Code Testing • When testing is done, Screen 20 displays automatically. 20. Screen 20: VCR Tuned to Channel 9? • If you select Yes, you see Screen 21. • If you select No, a different code is tested in Screen 19. Notes : • Many VCRs require testing more than one code. • If you select Test this code again, the same code is tested again in Screen 19.
Installation 21. Screen 21: Confirming Your Settings • Verify the Setup information is correct. • If it is, select Yes, end setup, and you see Screen 22. • If it is not, select No, repeat setup process, and you see Screen 1. 22. Screen 22: Congratulations • You have successfully completed Setup! • Press ENTER and you see Screen 23. 23. Screen 23: Helpful Information • This screen tells you valuable information on using your TV Guide On Screen system . • Press ENTER to watch TV.
Operation IEEE 1394 Functions - It's available to communicate to either direction and you can give and take a image, sound, or each control command with one cable. W How to connect the 1394 •To operate the IEEE1394, these methods are available as shown below. 1. When connecting the DVHS or the MicroMV Camcorder, as shown in the (a) or (b) figure, press the the control panel.
Operation IEEE 1394 Functions 2. When connecting the DVHS and the MicroMV Camcorder, as shown in the (c) or (d) figure, press the the control panel and then select the DVHS or the MicroMV Camcorder.
Operation DVHS W How to play the DVHS 1. Connect the IEEE 1394 jack at the TV to the IEEE 1394 jack at the DVHS with IEEE 1394 Cable. 2. When watching the TV, press the 1394 button. • Show the control panel of DVHS. • The control panel of DVHS -Depending on the connected equipment, marked control panel may be different. 1 3 4 5 2 6 7 8 9 1. DVHS Model 2. Connected Equipment to the 1394 3. DVHS Company 4. DVHS Operating Status 5. Power On/Off 6.
Operation IEEE 1394 Functions 34 DLP Projection TV
Operation MicroMV Camcorder and DVHS W How to play the MicroMV Camcorder and DVHS 1. Synchronously, connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DVHS and the MicroMV Camcorder with the IEEE 1394 Cable. 2. Press the D / E button to select a device, then press ENTER button to play it . And then selected device will be shown on the OSD.
Operation IEEE 1394 Functions DTV Link : DTV Link applies to 1394 connection of device labeled DTV Link logo. * What’s the DTV Link? It is normal standard of CEA which restricts by a remote and displays OSD and plays to stream of a remote control by using a connection of IEEE1394. WV How to play the DTV Link 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DTV Link supported device IEEE 1394 Cable. 2. When watching the TV, press the 1394 .
Operation W Don’t connect ! • When using one of these 2 methods, the IEEE1394 will not work properly. (a) LOOP Connection (b) When connecting the 4 devices and over, the 1394 will not work properly. Note: When the same devices connect with 2 devices and over, it’s undesirable.
Operation TV Guide On Screen TM System Overview - Your new TV contains the TV Guide On Screen Interactive Program Guide. - The TV Guide On Screen system has features that help you get the most out of your viewing experience. TV Guide On Screen Overview The TV Guide On Screen system has the following features: •Three 30-minute time periods in a 16x9 aspect ratio. •Eight days of show listings (today plus seven days). •Icons that indicate show rating, stereo, HDTV, new episode, etc.
Operation Screen Components - The screens displayed in the TV Guide On Screen system share many of the same compo- nents, as shown in the following figure: •Video Window - displays TV video while the Guide is displayed •Service Bar - provides access to the 4 main Guide Services •Current Service Label - indented to indicate current Service displayed •Tile - displays show title •Highlight - indicates an active tile •Info Box - provides information for a highlighted item •Info Button - cycles through the va
Operation TV Guide On Screen TM System Panel Menu •A Panel Menu appears when the Menu key is pressed on a highlighted tile and additional options are available. It also appears when you press ENTER on a show starting in the future. •When a Panel Menu appears, the highlighted tile changes color to indicate the Panel Menu relates to this tile. •The Panel Menu displays below the Video Window. •Help is available for a displayed Panel Menu by pressing the INFO button.
Operation Main Services Listings - Access Listings by pressing the TV Guide button on your remote or on the front panel of your TV. - Listings is always the first Service displayed in the Guide. - With Listings highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
Operation TV Guide On Screen TM System Search - Search lets you find shows by category (Alphabetical, Movies, Sports, Children, Educational, News, Variety, Series, HDTV) or by Keyword. - With Search highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. •Category Search Example: Movies 1. From Search, use the 42 DLP Projection TV E button to highlight Movies.
Operation 2. Use the E button to highlight a subcategory (for example, All). 3. Press ENTER to display a list of all Movies, organized by date and time. 4. Highlight a show and press ENTER to watch (if on now) or the Menu key to display the Episode Options menu. You can choose to set a recording, a reminder, or tune to the channel. Go to Service Bar - closes the menu, changes no information, and returns to the Search Service Bar.
Operation TV Guide On Screen TM System • Keyword Search - Keyword search lets you enter a word(s) to look for a particular show by category or for every show title that matches. 1. Highlight the Keyword navigation label, and press ENTER button to display the Keyword Search menu. 2. Highlight New Search, and press ENTER button. 3. The Search Options menu is displayed. 4. Highlight Category, and use the F / G buttons to select a category to search (e.g. All, HDTV, Children, Sports, etc.).
Operation 7. A list of all matching shows for that keyword is displayed. Like the Category Search Example, you can highlight a show, and press ENTER to display all airings. You can then highlight a specific listing and press ENTER to watch (if On now) or the Menu key to display the Episode Options menu. From the Episode Options menu, choose to set a recording, a reminder, or tune to the channel, as previously described. The Guide stores all the keywords you create.
Operation TV Guide On Screen TM System Schedule - Schedule lets you review, edit, or delete Record and Remind events that you set previously. - With Schedule highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
Operation Setup - After you complete the TV Guide On Screen system setup, you can come back and change its settings in the following areas: • Change System Settings • Change Channel Display • Change Default Options Highlight a choice, press ENTER, and follow the on-screen instructions. With Setup highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
Operation TV Guide On Screen TM System • Change Channel Display Change Channel Display lets you edit channel information that appears in Listings. With Change Channel Display you can: • Change the position number to indicate where in the Listings the channel displays. • Change the tune channel number • Switch a channel W On - the channel is always displayed W Off - the channel is never displayed W Auto-Hide - the channel is only displayed when program information is available.
Operation • Change Default Options Change Default Options lets you change default settings in the following categories: •General Default Options •Record Defaults •Remind Defaults Highlight Change Default Options, and press ENTER. General Default Options lets you set defaults for the following: •The initial Info Box size when the TV Guide On Screen system is entered. Choices are No, Small, Large, and Last Used (Default = Last Used).
Operation Record And Remind Features Record You can set a show to Record in Listings, Search, and Schedule or change Record settings for a show in Schedule. There are 3 ways to set a show to Record: 1) Using the Record Button on the Remote • Press the Record button on the remote to record the show Once with current default settings (Start and End recording On Time).
Operation TV Guide On Screen TM System When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. You see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show. 3) Manual Recording •Highlight the Schedule Service label, and press Menu to display the Schedule Options menu. •Use the D /E /F /G the number or the buttons to move through the options.
Operation •Use the F / G buttons to choose among Once, Daily, Weekly, and Off, as follows. Once —records the time, channel, input, recorder combination one time. W Daily —records the time, channel, input, recorder combination Monday through Friday. W Weekly —records the time, channel, input, recorder combination once a week on this selected day of the week W Off (not cancel) —keeps the time, channel, input, recorder combination in the list without recording until the frequency is W changed.
Operation TV Guide On Screen TM System Remind You can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder: 1) From a Panel Menu • Highlight a show, and press Menu to display the Episode Options menu. • Highlight Set Reminder, and press ENTER to display the Remind Options menu.
Operation 2) Manual Reminder •Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. •Use the D /E /F /G number or necessary. buttons to move through the options. Use the buttons to change the information, as D /E /F /G •Highlight New Manual Reminder and press the ENTER key to display the Remind Options menu. •Current information (i.e., date, start and end times, channel, input, frequency, etc.) is displayed.
Operation TV Guide On Screen TM System Based on your option settings, a notification screen will appear, if your TV is On at the reminder time. You can then choose to hide the reminder, or highlight the show, and press ENTER to tune to the show. If there is no activity for 3 minutes, the notification screen automatically closes and completes the highlighted item (hide reminders). If you choose Hide Reminders, the window closes for the show or shows, but does not affect other Reminders you set.
Operation Operation Turning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Turning on the TV just after installation 1. Connect power cord correctly. 2. Press the POWER button on the TV. At this moment, the TV is switched to standby mode. Press the TV INPUT, TV/VIDEO, CH (D / E), Number (0 ~ 9) button on the remote control or press the CH (D / ton on the TV front panel and then the TV will switch on.
Operation TV Setup On-screen Menus Language Selection - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use menu. 2. Press the G button and then use D / E D / E button to select the OPTION button to select Language. 3. Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. 4.
Operation Setup Menu Options EZ Scan (Channel Search) - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. - A password is required to gain access to EZ Scan menu if the Lock System is turned on. 1. Press the MENU button and then use 2. Press the G button and then use D /E D /E button to select the SETUP menu. button to select EZ Scan. 3.
Operation Setup Menu Options Channel Edit - Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list created from the EZ Scan channel search. - A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color.
Operation Channel Label Setup - Choose preset labels for your channels. - If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV channel - even if you didn't preset a label for the channel. 1. Press the MENU button and then use 2. Press the G button and then use D /E D /E button to select the SETUP menu. button to select Channel Label. 3. Press the G button. You will now see a screen filled with Labels and a preview screen. 4.
Operation - Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D /E 2. Press the G button and then use D (Contrast, button to select the desired picture option 62 DLP Projection TV /E button to select the VIDEO menu.
Operation Audio Menu Options Audio Language - Other languages may be available if a digital signal is provided by the broadcasting station. 1. Press the MENU button and then use D 2. Press the G button and then use 3. Press the French. button to select the AUDIO menu. button to select Audio Language.
Operation Audio Menu Options Front Surround - is a trademark of SRS Labs, Inc. - TruSurround XT technology is incorporated under license from SRS Labs, Inc. - Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. 1. Press the MENU button and then use D 2. Press the G button and then use D /E /E button to select the AUDIO menu. button to select Front Surround. 3.
Operation T ime Menu Options Auto Clock Setup - The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually, if the current time is set incorrectly by the auto clock function. When you set up TV Guide, Auto Clock menu is not selected. 1. Press the MENU button and then use D /E button to select the TIME menu. 2.
Operation T ime Menu Options Sleep Timer - The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. - You can also set up the Sleep Timer in the TIME menu. 1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2.
Operation Option Menu Options Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. - If you are viewing a picture with a 16:9 aspect ratio, you can’t use the Horizon aspect ratio option.
Operation Option Menu Options Caption 1. Press the MENU button and then use D 2. Press the G button and then use 3. Press the G button and then use D /E D /E /E button to select the OPTION menu. button to select Caption. button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Caption/Text Caption/Text Analog Broadcasting System Captions - Select a caption mode for displaying captioning information if provided on a program.
Operation Caption Option - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use menu. D /E 2. Press the G button and then use D /E button to select Caption Option. 3. Press the G button and then use F /G button to select Custom. button to select the OPTION 4. Use D / E button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language.
Operation Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Operation Parental Lock Setup - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. 1. Press the MENU button and then use D Then, press the G button /E button to select the LOCK menu. • Enter the password as requested. • The TV is set up with the initial password “0-0-0-0”. 2. Use the D / E button to choose from the following Lock Menu options. Once the option is selected, change the settings to your preference.
Operation Cable menu options - The Cable sub menu displays when inserting the CableCARDTM to the TV. - The CableCARDTM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARDTM type. 1. Press the MENU button and then use menu. 2. Press the G button and then use 3. Press the G button. D /E D /E In case of Scientific Atlanta CableCARD™ button to select the CABLE button to select your desired item. 4.
Operation Cable Channel List 1. 2. 3. 4. 1. If you enter the Channel Edit after running the EZ Scan without CableCARDTM, you can see the cable channel list as the picture 3 above. 2. Insert the CableCARDTM. Then, the TV will receive a new cable channel list which is usually one part channel. It takes about 2~3 minutes to gather the cable channel list after inserting the CableCARDTM as the picture 4 above.
Operation - You can use the JPEG and MP3 file by memorizing to Memory card in mode. Notes on Memory Card Memory Card This is a device equipment to communicate the data between AV external equipment. It’s used to a digital camera, camcorder, MP3 player, notebook or PDA. Precaution for Using the Memory Card - Please be sure to insert the correct memory card type in the right direction. (Confirm between the two memory slots before insertion.
Operation A vailable Memory Card Slot 2 Slot 1 * Check the direction of the Memory card. (to the direction of the lower pictures) Memory Card type - Use the specified card based on the slot location. - 8 types of Memory Card can be used for this set. - NTFS file system is not supported.
Operation Notes on Memory Card The JPEG Decoding/The Image Preview Supplied Spec Compression Method Colour format 4:2:2 4:4:4 4:2:0 Progressive 21:11:11 (Y, Cb, Cr) 11:11:11 (Y, Cb, Cr) 12:11:11 (Y, Cb, Cr) 22:11:11 (Y, Cb, Cr) Baseline JPEG Decoding Support O X X O O Image Display Image invalid format invalid format Image Image Display when there is Display when there is no thumbnail. no thumbnail. Display Preview Image Display when there is no thumbnail.
Operation * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Select the Photo or Music Media - When you plug a memory card or press the button, the below screens will be displayed. Please select where to move Memory 1 Photo MS/Pro Music Memory 2 Photo CF/MD Music Exit 1. Press D /E /F /G button to select photo or music for slot1/2. 2. Press the ENTER button to enter the photo or music media. 3.
Operation JPEG File V iewing Options - When you select Photo in entry menu, you will now see a screen filled with thumbnail photo media. * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Screen Components Current page/Total page Marked JPEG file number Card type Usable Card memory/ Total Card memory Left Menu Direct Buttons Photo Selection and PopUp menu - Select your desired image file.
Operation Mark/Unmark for JPEG file - You can mark/unmark the file to view the desired file or use slide show for desired file conveniently. - The selected file displays orange in color. When pressing the ENTER button after marking some a file, the marked file displays green in color. W Mark/Unmark for all files 1. In photo media, repeatedly press 2. Press the D /E F button to enter the menu on the left. button to select Mark All or Unmark All. • If you select Mark All, every file is selected.
Operation JPEG File V iewing Options The Image Adjustment - You can display the selected image on entire screen and do the various adjustment for the JPEG file. View Slide Show Delete Cancel 1. Press the D /E /F /G 2. Press the D /E button to select JPEG file and then press the ENTER button. button to select View and then press the ENTER button The selected image will display on entire screen. F G Prev./Next Image selection Image Rotation Rotate CH G 1/15 F G 3. Adjust the JPEG file.
Operation Slide Show 1. Press the D / E / F / G button to select JPEG file and then press the ENTER button. 2. Press the D / E button to select Slide Show or Show Marked and then press the ENTER button. (If you mark the file with using MARK button, Show Marked is displayed on screen.) View Slide Show Delete Cancel 3. You can choose the slide show delayed time and effect. Press the D / E / F / G button to choose the slide show delayed time and effect.
Operation JPEG File V iewing Options JPEG file Deletion and Cancel View Slide show Delete Cancel 1. Use the D /E /F /G button to select JPEG file and then press the ENTER button. 2. To delete the file, press the D / E button to select Delete and then press the ENTER button. When “Do you want to delete the file?” message is displayed, select YES (YES or NO) with F / G button. The file is deleted, all the following files are shifted up one position.
Operation MP3 File Playing Operation - Purchased MP3/music files may contain copyright restrictions. Playback of these files may not be supported by this model. Screen Components Current Playing Time/Total Playing Time G : Play II : Pause A : Stop Current file number/Total file number Marked MP3 file number Card type Using Card memory/ Total Card memory Left Menu Direct Buttons MP3 File Selection and Playback - MP3 file Selection and deletion function don’t work while playing music.
Operation MP3 File Playing Operation * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Stop/Pause Playback W Stop Playback To stop playback, press the A button on the remote control. To stop playback, press the ENTER, VOL (F / G), CH (D / E) button on the TV. Notes: • If you replay the MP3 file after stopping, the highlighted MP3 file on menu will play.
Operation Jump Media - Use this funcion to jump to other media during using music media. Please select where to move Memory 1 MS/Pro Photo Music Memory 2 CF/MD Photo Music Cancel 1. In music media, press the 2. Press the D /E F button. button to select Jump media and then press the ENTER button. 3. Press the D / E / F / G button to select desired media and then press the ENTER button. The screen displays each media list.
Operation MP3 File Playing Operation MP3 file deletion and Cancel - It’s impossible to delete the music during playback. Play Delete Cancel 1. Use the D /E button to select MP3 file and then press the ENTER button. 2. To delete the file, press the D / E button to select Delete and then press the ENTER button. When “Do you want to delete the file?” message is displayed, select YES (YES or NO) with F / G button. The file is deleted, all the following files are shifted up one position.
Operation Remote Control PIP (Picture-In-Picture) / POP / Twin Picture - PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen.
Operation Moving the PIP sub picture In PIP mode, press the screen. D /E /F /G button to move the sub picture to a different location on the Adjusting Main and Sub Picture Sizes for Twin Picture Use the D /E /F /G button to change main and sub picture sizes in Twin Picture mode. i.e) If screen is adjusted to the maximal size, the large screen appears the black part at both the up and down sides.
Operation APM (Adaptive Picture Mode) - Allows a viewer to select their preferred picture mode after compairing the four different picture (Daylight, -and Custom) settings. Normal, Night Time 1. Press the APM button at once. As shown below, the screen is divided to 4-split. 2. Use the D / E / F / G button to navigate 4 EZ Pictures. 3. By pressing the ENTER button, you can select the desired mode. 4. Press EXIT button to return to TV viewing.
Operation Brief Info. Operation: • Watching TV/DTV/CATV/CADTV • Watching Video1, Video2, Video3 • Watching IEEE 1394 • In Component1, Component2, RGB, HDMI/DVI modes, INFO button is not working. 4:3 16 : 9 Function: • Show the present screen information. • On Watching with the upper Input signal, press the INFO button. • Press the INFO button or EXIT button to exit.
Operation EZ Mute - If you set the Caption on, nothing to do with the MUTE button, Caption function operates as Caption on or off. - When you repeatedly press the MUTE button, the screen is displayed in turn. (Refer to the lower picture) Mute EZ Mute EZ Mute : a special mute mode to activate the closed caption, automatically. Mute : Sound is muted. 24 Mute Off : Sound is enabled. Note: EZ Mute only operates in DTV/Analog/Video/Front Video.
Operation Screen Setup for PC mode Operation • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. • When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used. • In RGB-DTV mode, SIZE and PHASE is not available. Adjustment for screen Position, Size, Phase, Reset •After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. - Display PC Adjust Menu using ADJUST button. - Position : Adjust the screen position.
Programming the Remote Programming the Remote G The remote is a multi-brand or a universal remote . It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1. To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the corresponding device button on the remote. After that, press the POWER button.
Programming Codes Programming Codes VCRs Brand Codes Brand Codes Brand Codes Brand Codes AIWA AKAI 034 016 125 072 031 012 035 028 108 003 031 005 065 112 108 012 034 059 006 029 036 129 003 034 031 107 132 012 004 043 031 031 012 040 043 012 048 130 KENWOOD 014 047 001 101 034 003 017 040 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 013 063 031 031 067 101 013 PORTLAND PULSAR QUARTZ QUASAR RCA 108 072 011 033 013 040 107 145 003 031 053 058 148 0
Programming Codes HDSTB Brand Codes Brand ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 123 050 051 013 036 008 054 050 005 011 141 024 038 093 097 122 089 114 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 MACOM 010 065 MEMOREX 057 NEXTWAVE 028 NORSAT 069 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU 126 129 014 015 018 055 009 012 077 145 006 007 0
Troubleshooting Checklist Troubleshooting Checklist • Check whether the TV is turned on. No picture & No sound • Is the power cord inserted into wall power outlet? • Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in. Picture OK & No sound • Press the VOLUME (G) button. • Sound muted? Press MUTE button. • Check to see if there is any object between the TV and the remote control causing obstruction.
Troubleshooting Checklist No output from one of the speakers • Adjust Balance in the AUDIO menu. (Refer to p.63) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in the unit turning off and does not indicate a fault with the TV. Poor TV input signal • Check ANTENNA and CABLE connection. Poor Video signal • Check ANTENNA and CABLE connection.
Troubleshooting Checklist Troubleshooting Checklist Some channel numbers in the Guide are incorrect. • You can correct them using Change Channel Display under Setup. • Listings usually appear within 24 hours after a successful Setup. • It may take up to a week to fill the Listings grid with the full 8 days of listings. • If you see a Listings grid with the message "No Listings" displayed you should start to receive updated program listings within 24 hours.
Maintenance Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.
Product Specification Product Specifications MODEL 62SX4D-UB 52SX4D-UB Horizontal Size (inches) 55.7 63.4 Height (inches) 35.8 40.4 Depth (inches) 15.7 19.5 Weight (lbs.) 82.7 108 Power requirement AC120V ~ 60Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135.
Notes Owner’s Manual 101
Notes 102 DLP Projection TV
CONCERNING PIXEL FUNCTIONALITY: Your DLP Rear Projection Television contains about 921600 individual pixels. DLP Projection displays typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturer’s specifications, indicating that any pixel defects do not effect the operation or use of your display.
LG® Brand DLP Rear Projection Television U.S. Limited Warranty Your LG® brand DLP Rear Projection Television will be repaired or replaced as set forth below, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States.
