User Guide LG EzSign 2.0 Editor www.lg.
Contents Contents 3 Before Using 3 What is LG EzSign 2.0 Editor? 3 Installing LG EzSign 2.0 Editor 3 System Requirements 4 Installation 4 Delete 5 Using LG EzSign 2.0 Editor 5 Running LG EzSign 2.0 Editor 5 Using the Quick Guide 5 Starting EzSign 2.
Before Using Before Using What is LG EzSign 2.0 Editor? LG EzSign 2.0 Editor allows you to create advertising content quickly and easily. LG EzSign 2.0 Editor provides a wizard-type user interface for ease of use. Start LG EzSign 2.0 Editor and simply follow the wizard's steps to create and preview your own content. Content created using LG EzSign 2.
Before Using Installation 1 Go to My Computer > Digital_LG > Software > EzSign 2.0 Editor and double click the Setup. exe file. 2 Click the drop-down menu in the pop-up window to select a preferred language, and click OK. 3 In the LG EzSign 2.0 Editor Wizard screen, click NEXT. 6 If Adobe AIR is not installed on your computer, NOTE ꔈꔈ If a previous version of the program is already installed on your computer, click Yes in the pop-up window to remove it before installing the current version.
Using LG EzSign 2.0 Editor 5 Using LG EzSign 2.0 Editor You can easily create and play advertising content using the LG EzSign 2.0 Editor. Running LG EzSign 2.0 Editor To run LG EzSign 2.0 Editor, go to Start > All Programs > LG EzSign 2.0 Editor. NOTE ꔈꔈ To close LG EzSign 2.0 Editor, click at the top right of the window. ꔈꔈ 1024 x 768 or higher resolution is recommended for LG EzSign 2.0 Editor. if not, the screen may not be displayed normally.
Using LG EzSign 2.0 Editor Creating EzSign Content You can easily create content using default templates provided by LG EzSign 2.0 Editor. For detailed information about creating EzSign content files, see the EzSign Editor Quick Guide. Make sure you read the NOTE below before creating a content file. Opening Content You cannot open a template file or an exported content file using Open. You can only open a saved file using the Save or Save As buttons.
Using LG EzSign 2.0 Editor Editing Content  NOTE ꔈꔈ The file formats supported for images are GIF, JPEG, PNG, and BMP. ꔈꔈ Selected GIF or BMP files are automatically converted to JPEG files before being shown. The conversion may decrease the image quality depending on the quality of the original file. ꔈꔈ 4-bit BMP files are not recommended due to poor quality. ꔈꔈ Images larger than 4095 pixels in width or height are not allowed.
Using LG EzSign 2.0 Editor Viewing Clearer Text To see text more clearly, disable ClearType by following the steps below. XP Scheduling Content Playback Order You can set up the playback order by adding content files to the playlist. Set daily schedule to duration or time.  1 Right-click anywhere on the desktop and select Property from the menu. 2 Click the Appearance tab, then click the Effects button.
Using LG EzSign 2.0 Editor Exporting to a USB device You can create a list of the content files created using LG EzSign 2.0 Editor, set up the playback order and playback time of each file, and export to a USB device. Then, on TV, you can check the list and select the content files you want to play. Panel Saver Image sticking is when an image or outline of a previous image appears on the screen even after the image has changed. To prevent image sticking, LG EzSign 2.
Using LG EzSign 2.0 Editor Exporting to TV Using a wireless network, you can transfer content files saved on a PC to the TV without having to connect a USB device. To use this function, you must first connect a wireless dongle to the TV in order to connect to the wireless network. 12 Page See the network configuration.) The PC must also be connected to a router via a wired or wireless connection.
Using LG EzSign 2.0 Editor NOTE ꔈꔈ In EzSign 2.0 Editor, you can select a TV to send content files to. You can transfer the same or different content files to all the TVa scanned. After transfer, all the existing content files saved on the TV are replaced with the new files. ꔈꔈ If an error occurs during transfer, a pop-up message will appear and the previous file is played. ꔈꔈ The PC and the TV must be connected to the same router. ꔈꔈ The router IP address must be configured to 192.168.XXX.XXX.
Using LG EzSign 2.0 Editor Network Setting PIN mode connection 1 Follow steps 1 - 4 of "Wireless network setting". Wireless network connection Connect a wireless dongle to configure the wireless network. A wireless router must be installed and working at this time. Refer to the wireless router user manual to see how to install a wireless router. 2 Go to PIN mode connection.
Managing Content 13 Managing Content * The On-Screen Display (OSD) in this manual is an example to help you understand how to operate the product, and may be slightly different from your projector depending on models. Saving Content on TV Memory 1 Connect the USB device on which the EzSign content is stored to the TV USB port. You will see the following on the TV screen. USB EzSign TV Movie List Photo List Music List 2 Select EzSign TV using the TV remote control.
Managing Content ❶ ❷ ❸ ❹ Viewing Content Saved on the TV Memory You must first copy the content files to the TV memory. 1 Press the Menu button on the remote control. 2 Select My Media using the remote control. 3 Select EzSign TV. USB EzSign TV Movie List Photo List Music List 4 Select TV Memory tab. ❺ You can select the files you want to play from the file list using the TV remote control.
Managing Content NOTE ꔈ You can switch to EzSign mode or TV mode or see the file information while a file is being played from a USB device or the TV memory by pressing any button on the TV remote control. ꔈ When you turn on a TV which has been set to the factory default, any content files on the TV are automatically played. ꔈ If there are several files in the playlist, you can proceed to the next page. Exit Returns to the previous TV mode or Movie mode when the file is being played.
Managing Content Deleting EzSign Content from the TV Memory 1 Press the Menu button on the TV remote control. 2 Select My Media using the remote control. USB Movie List Photo List Music List 4 Select TV Memory tab. USB TV memory EzSign content exists. Do you want to play it? Play Close Delete 5 Select Delete. 6 In the pop-up window, enter the 4-digit TV password, and select Close.
