Owners manual

Installation
21
3
Installation
5-1. Select one of the below options.
• Start Wizard: Select this option when you want to set the conguration with wizard. If you select this option, follow next steps.
NOTE
It is recommended that you use the Start Wizard option rather than the Manual Setting option.
• Manual Setting: Skip the wizard conguration and display the main setup window. You can set the system conguration manually.
NOTE
If you setup incorrectly in Manual Setting, you may not be able to connect to calls.
5-2. Select [Next] and press OK to go to the next step or press
ll
.
6. Select the time zone.
6-1. Use [ ] or [ ] to select the time zone and press OK.
6-2. Use [
] or [ ] to select the country where the device is located and press OK.
6-3. Select [Next] and press OK to go to the next step or press
ll
.
7. Select the one of the network setting options.
• DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address
is assigned automatically.