User's Manual

Terminal Development Center
10
LGIC
l Select Menu + 7 + 1
l Select one of ‘Always Off / Flip Open / 10 Sec. / Auto’ using the next setup (Soft Key1) or ‘V/#’
key.
l Press OK to store the selected value.
Following values can be set.
Always Off: Background illumination is always off.
10 Sec.: Background illumination is on for 10 seconds.
Automatic: It remains in off-state from 08:00 through 17:00, otherwise the background illumination
lights up every 9 seconds.
Flip Open: Background illumination lights up only when the flip is open.
7.2 Key Tone Length
* Function to set the length of DTMF TONE.
l Select Menu + 7 + 2
l Select one of ‘Short/Long’ using the next setup key (Soft Key1) or ‘V/#’ key.
Short: Once the key is pressed, DTMF TONE is transmitted for a specific period [200ms]
Long: DTMF TONE is transmitted constantly, while the key is pressed on hold.
7.3 Logo Setup
* Function to store the characters to be displayed on the stand-by screen of the terminal.
l Select Menu + 7 + 3
l Enter the contents of logo. [Up to 16chaacters]
l Press OK key.
7.4 Modem Terminating Setup [Only available for a phone with data communication function]
* When you use the data communication function , you can select modem communication or fax
communication.
l Select ‘Menu + 7 + 5’
l Select one of ‘Terminating Release / Modem Terminating / Fax Terminating’ using V/# key and
press STORE key.