User's Manual

Terminal Development Center
13
LGIC
9.3.3 Error Delete [Menu + 0 + 000000 + 3 + 3]
* Function used to delete the entities stored in the error list.
l Select ‘ Menu + 0 + 000000 + 3 + 3’ .
l Select ‘ Yes’ of ‘ Yes/No’ using the next setup key (Soft Key1) or ‘ V/#’ key and press STORE
key.
At this moment, a message of “ Please, wait” appears and once the deletion is completed, it
returns to the previous status.
9.3.4 Error List [Menu + 0 + 000000 + 3 + 4]
* Function used to verify the entities stored in the error list.
l Select ‘ Menu + 0 + 000000 + 3 + 4’
l You can verify 20 lists of error using the next setup key (Soft Key1) or V/# key.
End => It returns to the stand-by status
Del => It returns to the previous state
9.4 Service Setup [Menu + 0 + 000000 + 4]
* You can select NAM#1 ~ NAM#4 parameters.
l Select ‘ Menu + 0 + 000000 + 6’ .
NAM#1 parameters are appeared as follows and you can edit the editable items.
PHONE MODEL / SLOT CYCLE INDEX [Editable] / PHONE NUMBER [Editable] / NAM NAME
[Editable]
OK => To store the contents and go to the next step. (Other keys lead to the end stage)
l If you press Further Edit key from the message of ‘ NAM1 Basic Program Edit End’ , the currently
used SERVICE CODE is appeared and you can edit the SERVICE CODE.
Following parameters can be edited.
Changeable Parameter Lists [NAM#1 ~ NAN#4]
NAM1 MOBILE COUNTY CODE /NAM1 MOBILE NETWORK CODE / NAM1 CDMA SID1~4 / NAM1
CDMA NID1 ~4/ NAM1 SYTEM A~B PRAMARY CHAN / NAM1 SYTEM A ~B SECONDARY CHAN .
9.5 Mode Change [Menu + 0 + 000000 + 5]
* Select the mode to use of DM Mode / Data Mode
l Select ‘ Menu + 0 + 000000 + 5’