manual

Operating 35
Operating
3
Sound adjustment
Setting sound effect
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
each sound effect button.
Sound effect Description
ASC
(Adaptive Sound
Control)
Analyzes the property of input
sound and provides the sound
optimized for the content in
real time.
BASS BLAST
Reinforces the bass and
powerful sound.
DTS V:X
You can enjoy more immersive
and cinematic surround sound.
y
In some of sound effect mode, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
y
You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound le changed.
,
Note
Adjust the woofer level settings
You can adjust the sound level of subwoofer as your
preference.
Press WOOFER
o
/
p
button to adjust woofer level.
When the subwoofer level reaches maximum or
minimum, standby LED (Red) on the main unit
turns on for 2 seconds.
,
Note
Adjust the rear speakers level
settings (Optional)
You can adjust the sound level of rear speakers as
your preference.
Press REAR
o
/
p
button to adjust rear speakers
level.
y
When the rear speaers level reaches
maximum or minimum , standby LED (Red) on
the main unit turns on for 2 seconds.
y
Adjusting rear speakers level is applyed only
when the rear speakers are connected.
,
Note