Owner's Manual
Table Of Contents
- 1 Getting Started
- 2 Connecting
- 3 System Setting
- 4 Operating
- Home Menu Display
- Playing the Linked Devices
- General Playback
- On-Screen Display
- Advanced Playback
- Repeat playback
- Repeating a specific portion
- Playing from selected time
- Selecting a subtitle language
- Hearing a different audio
- Watching from a different angle
- Changing the TV Aspect Ratio
- Changing subtitle Code Page
- Changing the Picture Mode
- Viewing content information
- Changing content list view
- Selecting a subtitle file
- Listening to music during slide show
- Playing file encoded in 3D
- Advanced Features
- Using the Premium
- 5 Troubleshooting
- 6 Appendix
- Controlling a TV with the Supplied Remote Control
- Network Software Update
- Additional Information
- Audio Output Specifications
- Output status during playback according to Dolby Vision TV or HDR10 TV
- Area Code List
- Language Code List
- Trademarks and Licenses
- Specifications
- Maintenance
- Important Information Relating to Network Services
System Setting24
System Setting
3
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplier
is not capable of handling 192 kHz and 96
kHz signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
[96 kHz]
Select this if your A/V Receiver or Amplier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[192 kHz]
Select this if your A/V Receiver or Amplier is
capable of handling 192 kHz signals.
Check the documentation for your A/V Receiver or
Amplier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specied by itself.
And the dynamic range of the Dolby Digital and
Dolby Digital Plus are operated as same as the
[On] mode.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD audio
output.
[Off]
Turns off this function.
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
,
Note
HDMI Audio Setting
Set the audio output via HDMI1 or HDMI2.
[Auto]
Audio output will be set automatically based on
the devices connected to HDMI1 and HDMI2.
[HDMI1]
Audio will be output to the component
connected to HDMI1.
[HDMI2]
Audio will be output to the component
connected to HDMI2.
DTS Neo:6
If the player is connected to the multi-channel Audio
Receiver by HDMI connection, set this option to
enjoy the multi-channel surround sound with the
2-channel audio source.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
y This function is not available on an on-line
service.
y Only the audio source with less than 48
kHz sampling frequency is available for this
function.
y This function is availabe only when [Digital
Output] option is set to [PCM].
,
Note