Owner's Manual
Table Of Contents
- 1 Getting Started
- 2 Connecting
- 3 System Setting
- 4 Operating
- Home Menu Display
- Playing the Linked Devices
- General Playback
- On-Screen Display
- Advanced Playback
- Repeat playback
- Repeating a specific portion
- Playing from selected time
- Selecting a subtitle language
- Hearing a different audio
- Watching from a different angle
- Changing the TV Aspect Ratio
- Changing subtitle Code Page
- Changing the Picture Mode
- Viewing content information
- Changing content list view
- Selecting a subtitle file
- Listening to music during slide show
- Playing file encoded in 3D
- Advanced Features
- Using the Premium
- 5 Troubleshooting
- 6 Appendix
- Controlling a TV with the Supplied Remote Control
- Network Software Update
- Additional Information
- Audio Output Specifications
- Output status during playback according to Dolby Vision TV or HDR10 TV
- Area Code List
- Language Code List
- Trademarks and Licenses
- Specifications
- Maintenance
- Important Information Relating to Network Services
5 Troubleshooting
Troubleshooting42
Troubleshooting
5
Troubleshooting
General
Symptom Cause & Solution
The unit does not work properly. y Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplier, etc.) and turn it on again.
y Disconnect the power cord of this unit and the connected external
device (TV, Woofer, DVD-player, Amplier, etc.) and then try connecting
again.
The Power does not turn on. y Plug the power cord into the wall outlet securely.
y Be sure that the AC adaptor is connected to the unit securely.
The unit does not start
playback.
y Insert a playable disc. (Check the disc type, color system, and regional
code.)
y Place the disc with the playback side down.
y Place the disc on the disc tray correctly inside the guide.
y Clean the disc.
y Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
y Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
y If you use a USB extension cable or USB HUB, the USB devices may not
be recognized.
y A USB device which requires additional program installation when you
have connected it to a computer is not supported.
y This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed. y Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music les.
y The les are not recorded in a format that the unit can play.
y The unit does not support the codec of the movie le.
The remote control does not
work properly.
y The remote control is not pointed at the remote sensor of the unit.
y The remote control is too far from the unit.
y There is an obstacle in the path of the remote control and the unit.
y The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
You can reset the unit as follows.
y Unplug the power cord, wait at least ve seconds, and then plug it in
again.
The unit is not operating
normally.