Owners manual

5 Scroll up and then tap Google location settings > Mode.

Select High accuracy (GPS and networks).

Connecting to another mobile device

Before you can connect your G Watch R to another device, you must first delete all your data from the

G Watch R's memory by resetting it.

Resetting the watch

1 Make sure your G W

atch R is turned on, then press and hold the Power button until the Settings menu

is displayed.

2 Swipe up until you see the Reset device option and tap it.

Then tap .

3 When you see the setup screen, tap the desired language and follow the prompts to connect the new

mobile device to your G W

atch R.

Tips for using Bluetooth

• When connecting your G Watch R to your mobile device, the devices must be positioned close to each other.

• Bluetooth uses a relatively low-power radio signal. Some industrial, scientific, medical and other low- power

products can interfere with Bluetooth connections. In an open space, the Bluetooth communication range

usually spans approximately 10m (33 feet).

• Not all Bluetooth-capable mobile devices will work with your G Watch R. Some devices may not be compatible

with your G Watch R, in particular those which are not tested or approved by the Bluetooth SIG.