User's Guide i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ _• Make sure to read the Important Precautions before usingthe product. Keepthe User'sGuide(CD)in an accessibleplace for futurereference. See the labelattachedon the productand givethe int'onnaion to your dealer when you ask ti)rservice.
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the foUowing basic rules for its installation, use, and servicing.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage, Do not use this display near water such as near a bathtub, washbowl, sink, laundry tub, in a wet basement, or near a swimming pool, kitchen Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation, If these openings are blocked, built-up heat can cause failures which may result in a fire hazard,
On Cleaning • Unplug the display before cleaning the face of the display screen, • Use a slightly damp (not wet) cloth, Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock, • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching, Do not clean with a wet cloth or spray water or other liquids directly onto the product, An electric shock may occur, (Do not use chemicals such as benzene, paint thinners or alcoh
• Before setting up the monitor, ensure that the power to the monitor, system, and other attached devices is turned off. the computer Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth, 2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction, Stand Body Stand Base 3. Tie down the base lock to perpendicularity direction 4.
Disassembling the stand ]. Put a cushion or soft cloth on a flat surface, 2. Place the monitor face down on the cushion or soft cloth, 3. Change your lock on the product as it follows and turn it in the arrow direction If you can't release the stand base even the locking rib is at a release position, Please push the indicated rib down and retry it 4.
• Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1.
Using the Computer ]. Make sure to turn off the computer and )roduct, Connect the cable as below sketch map form (D to (_), Q Connect DVI-DCable Connect D-subCable (PC) Connect D-subCable (Mat:) PowerCord Analog signalDigital signal D-sub DVI Wall-outlet type MAC L..j,_ Mac adapter ForApple Macintoshuse,a separatep!ug adapteris neededto changebe 15pinhigh density(3 row)D.sub VGAconnecteronthe suppliedcable to a 15pin 2 rowseRReCtOll DVI-D (Thisfeatureis notavailableinall countries.) 2.
Using the cable holder (This feature is not available in all models.
Front Panel Controls O srnOrt Button Use this button to enter CINEMA MODE,AUTO BRIGHT,TIME CONTROL,LIVE SENSOR,SMART items,for more information,refer to page A17. Fun Use this button to enter EZ ZOOMING, 4:3 IN WIDE, PHOTO EFFECT items, for more information, refer to page A18-A19. Button Use this button to enter or exit from the On Screen Display. MENU Button OSD LOCKED/UNLOCKED [ 1 This function allowsyou to lockthe currentcontrolsettings,so thatthese settingsare not inadvertentlychanged.
¸i ,i i ,ili i V A V Buttons Button Use these buttons to select or adjust functions in the On Screen Display. For more information, refer to page A20. ( j,'f'.ENGINE ) ,4_ Button (SOURCE) AUTO/SET Button Use this button to make either D-Sub or DVI connector active. This feature is used when two computers are connected to the display. The default setting is D-Sub. Use this button to select an icon in the On Screen Display.
Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
The following table indicates all the On Screen Display control, adjustment, and setting menus.
You were introduced to the procedure of _lecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears.
PICTURE • • • • BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. MENU : Exit ¥ :Decrease J, :Increase SET : Select another sub-menu COLOR PRESET [] RED GREEN • sRGB: Set the screen color to fit the SRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white.
TRACKING HORIZONTAL To move image left and right. VERTICAL To move image up and down. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. • • • • MENU" Exit Y : Decrease SHARPNESS J, "Increase SET : Select another sub-menu To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen.
SETUP LANGUAGE To choose the language in which the control names are displayed. OSD To adjust position of the OSD window POSITION on the screen. WHITE BALANCE If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.
,_,_TheOSD screen willappear when youtouch thesmart button ontheright bottom ofthe monitor. CINEMA MODE It focuses better on the moving picture in selected area. *This function is operated only if the fortemanager is installed to pc. AUTO BRIGHT If select on, it automatically controls the brightness of display to best suit the surrounding working environment,providing the optimal viewing condition and maximized user convenience. If select off,auto brightness is off.
The OSD screen will appear when you touch the FUN button on the right bottom of the monitor. 4:3 IN PHoTo I WIDE EZ ZOOMING EZ Zoom lowers the display's resolution in single-step increments. Depressing the button once lowers the resolution by one step; while a second button-press returns the resolution to the original display settings. *This function is operated only if the forteManager is installed to PC. 4:3 IN WIDE To select the image size of the screen.
J PHOTOEFFECT - NORMAL: The PhotoEffect function is disabled. GAUSSIAN BLUR: This option is to add the effect to the screen that the dark and sharp image becomes brighter and more blurred. !!|ii PHOTO EFFECT - SEPIA: This option changes the screen to be Sepia tone. The Sepia tone is brown color tone. MONOCHROME: This option changed the screen to be Gray tone. The screen is displayed by white, black, gray.
TheOSD screen willappear when youtouch the3_ENGINE button ontheright bottom of themonitor. Menu MOVIE This feature lets you easily select the best desired INTERNETimage condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation images invideos or movies • MENU • Exit • I' A: Move INTERNET: For text images (Word processingetc.) --USER User You can manually adjust ACE or RCM. You can save or restore the adjusted value even when using a different environment.
Check the following before calling for service. O Is the power cord of the display connected? • Check and see if the powercord is connected properlyto the power outlet. O Is the power indicator light on? • Press the Powerbutton. O Is the power indicator flickering? • If the display is in power saving mode,try moving the mouseor pressingany key on the keyboardto bring up the screen. • Try to turn on the PC.
O Display Position is incorrect. • PresstheAUTO/SETbuttonto automatically adjust your display imageto the ideal setting. If the resultsare unsatisfactory,adjust the image positionusingthe H position and V position icon in the on screen display. 0 On the screen • PresstheAUTO/SETbuttonto automatically adjust your display imageto the ideal setting. If the resultsare unsatisfactory,decreasethe verticalbars or stripesusingthe CLOCK iconin the on screen display.
_,Thescreen coloris monoorabnormal. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel -Settings _,Thescreenblinks. • Check if the screen is set to interlace mode and if yes,change it to the recommend resolution.
Display 20 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50.8 cm 0.0922(H)*0.2766(V) mm pixel pitch Sync Input Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Vertical Freq. Input Form Video Input Signal Input 15 pin D-Sub Connector DVl - D connector (Digital) RGB Analog (0.
Display 21.5inches (54.6cm)FlatPanelActivematrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.6 cm 0.248*0.248 mm pixel pitch Sync Input Horizontal Freq. Vertical Freq. Input Form Video Input Signal Input 15 pin D-Sub Connector DVl - D connector (Digital) RGB Analog (0.
Preset Modes (Resolution) W2053TQ 1 2 3 4 5 6 7 8 *9 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 900 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.000 70 60 75 60 75 60 75 75 60 * Recommend Mode W2253TQ 1 2 3 4 5 6 7 8 9 10 11 "12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920x1080 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 55.935 67.
yours ,,,,....
