Troubleshooting Guide

50 TROUBLESHOOTING
Performance
Problem Possible Cause & Solution
Wrinkling Washer is not unloaded promptly.
as soon as the cycle is complete.
Washer is overloaded.
should not be tightly packed with items. The
door of the washer should close easily.
Hot and cold water inlet hoses are reversed.
rments. Check the inlet hose connectors.
Staining Bleach or softener dispensed too soon.
osed too quickly, causing the bleach or
softener to dispense immediately. Always measure bleach, and never use more than 1 cup.
Bleach or softener was added directly to the wash load in the drum.
right time in the cycle.
Washer was not unloaded promptly.
on as possible after the cycle is completed.
Clothes were not properly sorted.
t colors and whites to prevent discoloration.
Poor stain removal Proper options are not selected.
quire extra cleaning power. Select the Heavy Soil
feature to boost the cleaning power of the selected cycle.
Previously set stains.
may have stains that have been set. These
stains may be difficult to remove and may require hand washing or pre-treating to aid in
stain removal.
Musty or mildewy
odor in the washer
Incorrect or too much detergent has been used.
instructions.
Inside of the drum was not cleaned properly.
Tub Clean cycle regularly.