Use and Care Manual
29OPERATION
ENGLISH
Cycle Modifiers
About Modifier Buttons
Each cycle has default settings that are selected
automatically. You can also customize these
settings using the cycle modifier buttons.
Repeatedly press the button for the desired
modifier until the indicator light for the desired
setting is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency.
This is a high-efficiency washer, and the water
levels may be much lower than you expect. This
is normal, and cleaning/rinsing performance will
not be compromised.
NOTE
The LED next to the setting lights up when the
setting is selected.
To protect your garments, not every wash
temperature, spin speed, soil level, or option is
available with every cycle.
A chime will sound twice and the LED will not
light if the desired setting is not allowed for the
selected cycle.
Follow the fabric care labels on the garment for
best results.
Temp.
Make sure the wash temperature is suitable for
the type of load you are washing.
Press the Temp. button repeatedly to select the
wash and rinse temperature combination for the
selected cycle.
All rinses use unheated cold water.
Cold rinses use less energy. The actual cold rinse
temperature depends on the temperature of the
cold water at the faucet.
Your washer features a heating element to boost
the hot water temperature for Extra Hot
settings. This provides improved wash
performance at normal water heater settings.
Spin
Higher spin speeds extract more water from
clothes, reducing drying time and saving energy.
Press the Spin button repeatedly until the
desired speed is selected.
Some fabrics, such as delicates, require a slower
spin speed.
Soil
Adjusting the soil level setting will modify the cycle
times and/or wash actions.
Press the Soil button repeatedly until the desired
soil level is selected.
The Heavy soil setting may increase cycle times.
The Light soil setting may decrease cycle times.
Dry Cycles
General Tips for Drying
Use the automatic programmes to dry most loads.
Electronic sensors measure the temperature of the
exhaust to increase or decrease drying
temperatures for faster reaction time and tighter
temperature control.
Cold water tap must be left on during drying
cycles.
This appliances automatic process from
washing to drying can be selected easily.
For most drying, make sure all clothes are
similar in material and thickness.
Do not overload the appliance by stuffing too
many articles into the drum. Items must be able
to tumble freely.
If you open the door and remove the load before
the appliance has finished its programme,
remember to press the Start/Pause button.
After the drying is finished,
ENd
appears on the
display. If the clothes are not unloaded from the
drum in a period of time,
Cd
appears on the
display and the appliance tumbles the clothes
periodically for about 4 hours to reduce creases.
To stop this function, press any button and
unload the clothes from the drum.
Woolen Articles
Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may shrink, by
varying amounts, depending on their quality.