Warranty

26
USING YOUR WASHING MACHINE
Setting options before the cycle
You can select and add desired optional functions
before you start the washing machine.
Adjusting melody and button tones, Signal
The washing machine plays a melody when the
wash cycle
is finished. The buttons make a sound each time a
button is
pressed. The volume of these melody and button
tones can be changed or they can be turned off if
desired.
1
Press the Power button.
2
Turn the cycle selector knob to the desired cycle.
3
Press the Signal button to adjust the melody and
button tones as desired.
4
You can now modify the cycle settings and add
options (see pages 25-28), or proceed to step 4 to
begin the cycle.
5
Press the Start/Pause button.
Prewashing, Prewash
Prewash for 15 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Press the Prewash button.
- The indicator light will turn on.
3
You can now modify the cycle settings and add
other options (see pages 25-28), or proceed to
step 4 to begin the cycle.
4
Press the Start/Pause button.
Rinse, drain and spin only, Rinse+Spin
Use this cycle to rinse detergent from the load.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Press the Rinse + Spin button.
3
Press the Spin Speed button repeatedly to set the
spin speed.
- The indicator light for the selected spin speed will
turn on.
4
Press the Start/Pause button.
Drum Lighting, Drum Light
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This light
automatically turns off when the door is closed and
the cycle starts. To turn on the light during a cycle
follow the instructions below.
1
Press and hold the Extra Rinse/Drum Light button
for 3 seconds during the wash cycle.
- The drum light will illuminate and then turn off
automatically after 4 minutes.
- It is normal for clothes and the gasket to appear
yellow in the LED lighting.
Tumbling clothes to prevent wrinkles,
Fresh Care
Use this function when you are not able to remove
your clothes from ths washer as soon as the wash
cycle ends.
1
Press and hold the Steam/Fresh Care button for 3
seconds before the wash cycle.
- The Fresh Care indicator light will turn on.
NOTE
y
This function provides periodic tumbling for up
to about 19 hours to prevent wrinkles. If you
press the Start/Pause or Power button, you can
unload your laundry at any time.
Adding an extra rinse cycle, Extra Rinse
You can add an extra rinse cycle to the default rinse
cycle.
1 Press the Power button and turn the cycle selector
knob to the desired cycle.
2 Press the Extra Rinse button.
- The Extra Rinse indicator light will turn on.
3 You can now modify the cycle settings and add
other options (see pages 25-28), or proceed to
step 4 to begin the cycle.
4 Press the Start/Pause button.