Warranty

27
ENGLISH
USING YOUR WASHING MACHINE
Presetting the start time, Delay Wash
You can delay the start time of the cycle.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Modify the cycle settings and add other options
(see pages 25-28), if desired.
3
Press the Delay Wash button repeatedly to select
the desired start time.
- The Delay Wash indicator light will turn on.
- The set start time will appear on the display
panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4
Press the Start/Pause button.
High temperature, Steam
Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning
benefits of a super hot wash.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Press the Steam button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
WARNING
y
Do not touch the door during steam cycles.
The
door surface can become very hot. Allow the
door lock to release before opening the door.
y
Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle.
Steam can cause severe burns.
NOTE
y
The steam option cannot be used with all cycles.
y
Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y
Do not add steam to cycles when washing
delicate fabrics such as wool or silk, or non-
colorfast fabrics.
Saving energy, Cold Wash™
Adding the Cold Wash™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using 6 different washing motions (Tumbling,
Rolling, Stepping, Scrubbing, Swinging and
Filtration), fabrics get the cleaning benefits, without
the energy usage.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Press the Cold Wash™ button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
NOTE
y
When you select the Cold Wash™ option, wash
time will be increased up to 10 minutes.
y
For high wash efficiency, use this option with
less than 8 pounds of laundry.
Saving time, Turbo Wash™
Adding the Turbo Wash™ option to normal cycles
reduces cycle time while providing the same wash
performance. The option uses the Twin Spray and
Optimization features of the washer to save time
without sacrificing performance.
1
Press the Power button and turn the cycle selector
knob to the desired cycle.
2
Press the Turbo Wash™ button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
NOTE
y
The Turbo Wash™ option cannot be used with
all cycles.
y
Turbo Wash™ is available in the beginning of
the Cotton/Normal and Perm. Press cycles.
y
Press and hold the Turbo Wash™ button to
change the default settings.