Troubleshooting Guide

37TROUBLESHOOTING
ENGLISH
dr
DRAIN FEATURE
Special drain feature
re than 4 minutes, the cycle will be canceled
and any water remaining in the tub will be drained.
dE
LID ERROR
Lid is not closed properly.
dL
LID LOCK ERROR
Lid is not locked properly.
Start/Pause button. You can hear
the locking sound to lock the lid in the beginning of the cycle. The washer will not operate
unless the lid is locked.
is fully retracted.
LE1
FOREIGN OBJECT
ERROR
Foreign objects such as coins, pins, clips, etc., are caught between the pulsator and the
inner tub.
Spin button without selecting a cycle to drain
and spin the load.
Spin cycle is completed, empty the tub and find and remove any objects caught
in the pulsator.
prevent error codes or damage to the
washer or clothing.
LE
is displayed first, then the
1
is displayed.
tcL
TUB CLEAN ALARM
It is time to run the Tub Clean cycle.
Tub Clean cycle is running or needs to be run
to clean the washer tub.
tc
is displayed first, then the
L
is displayed.
vb
UNBALANCE
DETECTION
The washer has detected an out of balance load.
action is required. If the washer detects a
load that is too far out of balance to spin, it will display this code while it is attempting to
rebalance the load. The washer will add water and try to redistribute the load
automatically.
tE
TEMPERATURE
SENSOR ERROR
Control error
displayed, call for service.
FE
OVERFLOW ERROR
Water level is too high due to a faulty water valve.
the washer, and call for service.
PE
PRESSURE SENSOR
ERROR
The water level sensor is not working correctly.
the washer, and call for service.
LE
MOTOR LOCKED
ERROR
A motor error has occurred.
displayed, call for service.
Problem Possible Cause & Solution