MOSCOW_XC102_ENG_MFL3828932 MODEL : XC-U102X (XC-U102-X, XCS-U102F) The working life of this product is 7 years since the date of purchase.
Lull me to sleep and wake me up Go to pages 5 & 9 Vinyl deck Go to page 6 Play CDs There is so much your Hi-Fi system can do Contents Setting up 3 About Player 4 About Remote control 5 Listening to CDs 6 Connecting your portable USB player 6 Listening to the radio 7 Listening to music from your portable player 8 About MP3/WMA 8 USER EQ 9 Setting the Clock 9 Use your player as an alarm clock 9 Safety Precaution 10 Troubleshooting 11 Specifications 11 MICRO Hi-Fi SYSTEM ] USER GUIDE Play from many exte
Setting up 1 Connect the speaker cables to the player Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the right-hand speaker are connected to the terminal marked R (right) + (plus) and - (minus). To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player. The connector will open ready to receive a cable. 2 Fit the AM loop aerial to its stand Connect the AM loop aerial to the player.
About Player 1/]] (POWER) You can set up the unit into an economic power save mode. In the power-on status, press and hold 1/] for about 3 seconds. To cancel power save mode, press 1/]. VOLUME Control the volume when using any function. eXtreme Dynamic Sound System Reinforce the treble, bass and surround sound effect. XDSS ON will show in the display. Press again for NORMAL. MP3 Optimizer Optimizes compressible MP3 files so that it improves the bass sound.
About Remote control CLOCK For setting the clock and checking the time. (see Setting the Clock) Search for a folder of MP3/WMA files When a CD containing MP3/WMA files in several folders is being played, press PRESET/FOLDER to select the folder you want to play. Choose a ‘preset number’ for a radio station (see Listening to the radio) Moving to other cards In case that more than two memory cards are connected to the USB port, press D.SKIP to select a card you want to use.
Listening to CDs 1. Open the CD drawer: 2. Insert the CD: Label facing up. 3. Close the CD drawer: The display will show the total number of tracks (files). 4. Select the CD function: 5. Start the CD playing: 6. To stop a CD playing: CD Z ON PLAYER FUNCTION ON REMOTE CD B/[] x CD Z B [] x Listening to CDs - more you can do Pause or restart a CD Search for a section within a track Press B [] on the front panel or B/[] on the remote control during playback. Press this button again to resume play.
Listening to the radio PROG. TUNER TUNE.-/ TUNE.+ PROG. ON PLAYER PRESET/FOLDER PROGRAM/MEMO FUNCTION TUN.-/ TUN.+ PROGRAM/MEMO ON REMOTE Make sure both the FM and AM aerials are connected. 1. Select either FM or AM: 2. Select the radio station: 3. To ‘save’ a radio station: A preset number will show in the display. 4. To select a ‘saved’ station: 5. To confirm press: Up to 50 radio stations can be saved.
Listening to music from your portable player 1 /]] AUX ON PLAYER POWER FUNCTION ON REMOTE The player can be used to play the music from many types of portable player. MICRO Hi-Fi SYSTEM ] USER GUIDE 1. Connect the portable player by plugging the unit into PORT. IN on the front of the player. 2. Turn the power on: 3. Select the PORTABLE function: 4.
USER EQ ON PLAYER EQ master ON REMOTE ON PLAYER POWER CLOCK ON REMOTE bb or BB SET bb or BB SET SET bb or BB 1 /]] CLOCK SET B[] or x bb or BB EQ Master SET You can listen to music with the desired sound effect (BASS, MIDDLE and TREBLE). 1. Select a “USER EQ”: 2. When “USER EQ” is displayed, press: 3. Select the sound effect you want among BASS, MIDDLE or TREBLE: 4. Adjust sound level (MIN, -4 to +4, MAX): 5. Repeat the steps from 3 to 4 to set other sound effect: 6.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Cause Correction • The power of the external source equipment is turned off. • The speaker cable is connected to a wrong position. • The power cord is disconnected. Troubleshooting Symptom No power. No sound. • Replace the battery with new one. • Plug the power cord into the wall outlet securely. • Switch on the external source equipment. • Set the speaker cable to the correct position, then turn on the unit again by pressing POWER. • Insert a playable disc.
P/NO : MFL38289121
