HT302PH_X8_JA8ULLS_ENG_0349 DVD/CD RECEIVER OWNER’S MANUAL MODEL: XH-T3029S XH-T3029S SH32PH-FZ, SH32PH-SZ SH32PH-CZ, SH32PH-WZ R USB Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Internet address ; http://ua.lge.com Customer Information Center LG ; (380-44) 490-7777, 8-800-303-0000.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Maintenance and Service Before use . . . . . . . . . . . . Front Panel/Rear Panel . . Remote Control . . . . . . . . Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .4 .5 .6 Handling the unit Installation and Setup TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .7 Optional Equipment Connection . . . . . . . . . . . .8 Antenna Connection . . . . . . . . .
Introduction Before use Types of Playable Discs DVD (8 cm / 12 cm disc) To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.
Front Panel/Rear Panel STANDBY/ON STANDBY indicator Lights red when the receiver is in Standby mode (off). Introduction MIC 1/MIC 2 Connect a microphone to MIC 1 or MIC 2 or to both sockets. FUNC./PLAY DISC Tray OPEN/CLOSE button Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window Remote sensor USB Port Connect to a USB port of multimedia (USB memory etc.) MONO/ST./ PAUSE/STEP STOP TUNING(-/+) /SKIP/SCAN .bb/BB> >) (.
Remote Control Z) OPEN/CLOSE (Z Opens and closes the disc tray. AUX POWER DVD Selects the output source (CD/DVD) BAND Select the System’s tuner (FM and AM bands) 0-9 numerical buttons Selects a service, programme number directly or selects numbered options in a menu. XTS Pro Supplies more natural and realistic sound. Supplies great sound effect. RETURN Removes the setup menu. AUDIO Selects an audio language (DVD) or an audio channel (CD). SOUND Selects the sound mode.
Installation and Setup TV Connection Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR.
Optional Equipment Connection Antenna Connection Connect a VCR to the AUX IN connectors. Connect the USB port of a USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Connect the supplied FM/AM antenna for listening to the radio. Front of DVD/CD Receiver Rear of VCR Connect the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector.
Assembling and Connecting to the Speakers The speakers are detached from the speaker stands. Connect the speaker cables and assemble the front and rear speakers from speaker stands as illustrated. Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). How to connect the Speakers 1. Set the speaker on the stand. 2.
Displaying Disc Information On - screen GENERAL OPERATION You can display various information about the disc loaded on-screen. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2.
DISPLAY Caution: Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. First, remove the disc in the DVD/CD Receiver. Next, press STOP on the remote control ( x ) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.
5.1 Speaker Setup LOCK (Parental Control) Make the following settings for the built-in 5.1 channel surround decoder. 1. Press ENTER and 5.1 Speaker Setup menu appears. US Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 2. Use b / B to select the desired speaker. 3. Adjust options using v / V / b / B buttons. 4. Press ENTER to confirm your selection. Returns to the previous menu. Speaker selection Select a speaker that you want to adjust.
Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 21. 1. Select “Area Code” on the LOCK menu then press B. 2. Follow the step 2 as shown previous paragraph (Rating). 3. Select the first character using v / V buttons. 4. Press B and select the second character using v / V buttons. 5. Press ENTER to confirm your Area code selection.
Operation General features Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) ALL DivX Press SKIP . twice briefly to step back to the previous chapter/track.
Notes on general features: Last Scene Memory This receiver memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. Additional features Time Search DVD DivX To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. 2.
Playing an Audio CD or MP3/WMA file Programmed Playback This unit can play Audio CDs or MP3/WMA files. The program function enables you to store your favorite tracks from any disc in the receiver memory. A program can contain 300 tracks. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media Audio CD, a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or ENTER, and playback starts. You can use variable playback functions. Refer to the page 14.
Zoom Viewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. Each time press ZOOM the setting change in the following order. Zoom on y Zoom off Press v/B/M to enlarge the video image. Press V/b/m to reduce the video image.
Playing a DivX Movie file Using this DVD/CD Receiver you can play DivX disc. 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. MOVIE DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 800x600 (W x H) pixel. • The file name of the DivX subtitle is available by 45 characters.
Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations” on the left). 1. Press BAND on the Remote Control until FM or AM (MW) appears in the display window. 1. Press BAND until FM or AM (MW) appears in the display window. 3. Press and hold TUN.
Sleep Timer Setting XTS/XTS Pro You can set the DVD/CD Receiver to turn off automatically at a specified time. Each time you press XTS Pro the setting changes in the following order. On (XTS) → NORMAL → Pro (XTS-P)... 1. Press SLEEP to set the desired sleep time. The SL indicator and the sleep time appears in the display window. 2. Each time you press SLEEP the setting changes in the following order.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause No power. • The power cord is disconnected. The power is on, but the DVD/CD Receiver does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output.
The remote control does not work properly. The front panel display is too dim. Correction • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually. • No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). • Preset the stations (page 19).
CD/DVD General Specifications Amplifier AM [MW] FM Tuner Video Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Laser Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video output COMPONENT VIDEO OUT Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Stereo mode Surround mode (* Depending on the sound mo
