Operating Guide | Warranty Model Number | Z15LA7R © Copyright 2004, LG Electronics USA, Inc.
Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : These servicing instructions are for use by qualified service personnel only.
Safety Instructions Safety Instructions continued 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Introduction Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Connection Options . . . . . . . . . . . . . . . . . . . . . . 7 Remote Control Key Functions . . . . . . . . . . . . . .8 Installation Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Kensington Security System . . . . .
Introduction Introduction Controls Side Control Panel Enter Button menu tv/video Menu Button /I on/off 6 Volume Buttons enter Power/Standby Indicator Glows red in Standby mode, Glows green when the TV is turned on.
Introduction Connection Options * Kensington Security System Connector (Refer to P.
Introduction Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. mute Switches the sound on or off. tv/video Selects: TV, Video, S-Video, Component or PC(only Z15LA7R) mode. fcr (Favorite Channels Review) Press to step through favorite channels. (Refer to p.17) multimedia Selects: TV, Component or PC(only Z15LA7R) mode.
Installation Installation mute power tv/video multimedia mts Accessories fcr exit menu ch enter vol vol ch 1 2 4 5 7 8 audio 3 6 9 video 0 cc flashbk sleep 1.5V 1.5V Owner’s Manual PC Signal Cable (Z15LA7R Only) Power Cord AAA Batteries PC Sound Cable (Z15LA7R Only) Remote Control Tie Bands - Arrange the wires with the tie bands. NOTES a. If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is nothing wrong with TV.
Installation Installation Instruction Rear A/V Cover * The connection panel is hidden behind the A/V cover. a. Remove the cover. b. Install wires as necessary. c. Reinstall the cover. Align the holes on the TV back panel with the two tabs on the rear A/V cover as shown. d. Close cover. W ire Holders - Thread, then pull the wires through the hole on the TV stand. Adjusting the TV Viewing Viewing Angle - You can adjust the vertical angle of the TV between -3° and 12°.
Installation External Equipment Connections - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten.
Installation VCR Setup AC INPUT Y PB H/P PR S-VIDEO COMPONENT(480i/480p/720p/1080i) DVD/DTV IN VIDEO IN ANT IN ANT OUT S-VIDEO OUT CH3 Cable TV Setup Connection 1 1. Connect the coaxial cable output on the cable box to the antenna input on the TV. 2. Connect the coaxial cable from the wall to the input on the cable box. 3. Set the channel switch to 3 or 4 and then tune TV to the same channel number. Connection 2 1. Connect your cable input of the cable box. 2.
Installation DTV Setup - To watch digitally broadcast programs, purchase and connect a digital set-top box. Connections Connect the digital set-top box video outputs to the COMPONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks. Viewing Setup 1. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 2. Use the tv/video or multimedia button on the remote control to select Component.
Installation Using Headphones - Plug headphones in to H/P jack as shown. - Adjust sound level to a headphone using the volume (F, G) buttons. While you are listening to sound through a headphone(s) TV speakers are shut off. AC INPUT Y PB PR COMPONENT(480i/480p/720p/1080i) DVD/DTV IN PC Setup H/P S-VIDEO VIDEO (MONO) L VIDEO IN (Z15LA7R Only) - After setup, be sure to select PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2.
Operation Operation PC Menu Options (Z15LA7R Only) - After setup, be sure to select PC source to see the PC image on TV screen. PC H-Position V-Position Clock Phase Auto Configure Reset D F E 85 OK MENU 1. Press the menu button and then use D 2. Press the 3. Use the F G button and then use / G button /E D /E button to select the PC menu. button to select desired item. to make appropriate adjustments. • H-position/V-position Adjusts picture left/right and up/down.
Operation TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the power, ch (D,E), tv/video, multimedia or a number button on the remote control or on/off, ch (D,E), tv/video located on the TV to turn the TV on. 2. Select the viewing source by pressing tv/video or multimedia repeatedly.
Operation Channel Menu Options Memorizing the Channels with EZ Scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 1. Press the menu button and then use D / E button to select the Channel menu. 2. Press the G button and then use D /E button to select EZ Scan. Channel EZ Scan Manual prog. Favorite ch. To start 3. Press the G button to begin the channel search.
Operation Picture Menu Options EZ Video Video - This function adjusts the TV for the best picture appearance. 1. Press the video button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the Picture menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed.
Operation Sound Menu Options EZ Audio - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. 1. Use the audio button to select the appropriate sound setup as shown below. Flat Music Movie Sports User • You can also adjust EZ Audio in the Sound menu. Equalizer Adjustments 1. Press the menu button and then use D / E button to select the Sound menu. 2. Press the G button and then use select EZ Audio.
Operation T imer Menu Options Auto Clock Setup - The time can be automatically set using information from your local PBS TV station. The PBS channel signal includes information for the correct time and daylight savings time. Timer Clock Off timer On timer Auto off D FG E Auto Manual G Auto Clock Time zone Auto PBS Ch. TV 1 D.S.T. Auto FG OK MENU 1. Press the menu button and then use D /E Move D E Adjust  Exit button to select the Timer menu. 2.
Operation On/Off On/Off Timer Setup - Timer function operates only if current time is set. Off-Timer function overrides On-Timer function if they are set to the same time. The TV must be in standby mode for the On-Timer to work. If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode. 1. Press the menu button and then use D / E button to select the Timer menu. 2.
Operation Special Menu Options Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Operation Caption/Text Caption/Text 1. Press the menu button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Caption / Text. 3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. • CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
Operation Lock Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be set : 1.
Operation Lock Menu Setup Special Language Caption / Text Captions Key lock Parental D FG E Parental Lock Set password MPAA Age block Content block Aux. block Canadian To set D FG E OK MENU 1. Press the menu button and then use D 2. Press the G button and then use Then, press the G button. D /E /E On Off OK MENU button to select the Special menu. button to select Parental. • If Lock is already set, enter the password requested. • The TV is set with the initial password “0-0-0-0”. 2.
Maintenance & Product Specification Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting Checklist Troubleshooting Checklist SYMPTOMS No power No picture or sound Poor picture but good sound Poor reception Lines in picture Ghosts (multiple images) Remote control does not work. Cannot tune desired channel. CHECK THESE THINGS Is power cord plugged in ? Is television turned on ? Check batteries in remote control. Try another channel (station trouble). Check antenna connectings. Check for local interference. Adjust the antenna. Adjust the picture control.
ZENITH ELECTRONICS CORPORATION LCD-TV LIMITED WARRANTY – USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original purchase of the product. This limited warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
