Colors Sinks Care & Use Warranty FAQ Merchandising DURABLE BEAUTY
CARE & USE Viatera CARE AND USE GUIDE Care & Maintenance of Viatera The composition of Viatera® makes the material low maintenance and resistant to scratches and stains. Viatera is non-porous and heat-resistant, and remains beautiful and durable for many years of enjoyment with virtually no maintenance. Regular Cleaning Every day cleaning of Viatera only requires a damp cloth or paper towel. For tougher spots, a mild non-abrasive cleanser can help. For best results, clean spills as soon as possible.
CARE & USE product. Do not use abrasive and /or alkaline cleaning products. Do not use 3M ScotchBrite® green scrub pads or similar products, as they may dull the surfaces. When trying a new cleaning product, it is recommended that you always try the cleaner first on a hidden place of the surface and follow the cleaner manufacturer’s instructions. By following the simple care guidelines above, we hope that you will enjoy the lasting beauty and luxurious feel of all Viatera Quartz surface.
WARRANTY Viatera 15 YEAR RESIDENTIAL WARRANTY LG Hausys offers a 15-year limited warranty on Viatera Quartz Surface, warranting that the material will be free of manufacturing defects. This warranty covers product defects for a period of fifteen years after the date of installation.
WARRANTY This warranty is extended to the original purchaser and may be transferred or assigned. A purchase receipt or other proof of date of original purchase will be required before warranty service is rendered. If transferred, a new warranty registration must be submitted with proof of the original purchase. The new warranty will be valid for the remaining time since the original purchase.
FAQ What is Viatera Quartz Surface? Viatera® is a slab product manufactured using 93% quartz minerals and 7% polyester resin binder. The category this product belongs to is often termed “Quartz Surfacing” within the industry. The majority of products in this category are produced using the same or similar manufacturing process which utilizes vibro-compaction under vacuum pressure. This process yields slabs in either 2cm or 3cm thickness.
FAQ What is lamination? Lamination is a process used to join two pieces of Viatera together to create a thicker edge height. An example would be when two pieces of 2cm thick material are joined together to form a 4cm (1-1/2”) edge. Lamination lines or seams may be visible where the two pieces meet.
