User's Guide

Copyright ⓒ. 2017. All Rights Reserved.
7. General specifications
7.2 WCDMA B2 electrical specifications
Table 9. WCDMA B2 RF specification
TEST ITEM Spec. Test Temperature
Test Freq
uency
CHANNEL
9662 9800 9938
1 Maximum Output Power 20.3~25.7dBm
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
2 Frequency Error -195 ~ +195Hz
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
3
Inner Loop Power Control in the Uplin
k
PASS Normal Mid - PASS -
4 Minimum Output Power -49dBm ↓
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
5 Occupied Bandwidth (OBW) 5MHz ↓ Normal
Low, Mid,
High
PASS PASS PASS
6
Spectrum emis
sion mask
SEM Band1 Offset2.
5-3.5MHz (at Freq+3.
5MHz)
-48.5dBc ↓
Normal
Low, Mid,
High
PASS PASS PASS
SEM Band1 Offset3.
5-7.5MHz (at Freq+7.
5MHz)
-37.5dBc ↓ PASS PASS PASS
SEM Band1 Offset7.
5-8.5MHz (at Freq+8.
5MHz)
-47.5dBc ↓ PASS PASS PASS
SEM Band1 Offset8.
5-12.5MHz
-47.5dBc ↓ PASS PASS PASS
7
Adjacent Chan
nel Leakage Po
wer Ratio (ACL
R)
ACLR Offset +5/-5M
Hz Rel
-32.2dBc ↓
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
ACLR Offset +10/-10
MHz Rel
-42.2dBc ↓
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
8
Error Vector M
agnitude(EVM)
EVM at Tx output po
wer 24dBm /-18dBm
17.5% ↓ Normal
Low, Mid,
High
PASS PASS PASS
9
Peak code do
main error
PCDE at Tx output p
ower 24dBm/-18dBm
-14dB ↓ Normal
Low, Mid,
High
PASS PASS PASS
10
Phase Disconti
nuity
Phase Discontinuity
max EVM
17.5% ↓
Normal Mid
- PASS -
Phase Discontinuity
max Frequency Error
-195~195Hz - PASS -
Phase Discontinuity
max 1500Hz
36 degrees ↓ - PASS -
11
Reference Sen
sitivity Level
Ref Sense Go/No Go
I^or=-104dBm/3.84M
Hz
BER 0.1% ↓
Normal, Temp L, Te
mp H
Low, Mid,
High
PASS PASS PASS
12
Maximum Inpu
t Level
Max Input Go/No Go
I^or=-25.7dBm/3.84M
Hz
BER 0.1% ↓ Normal Mid - PASS -