User's Guide

9. Approbation FCC

This module complies with FCC/IC rules.

FCC : Part 22, Part 24, Part 27

ISED : RSS-130, RSS-132, RSS-133, RSS-139, RSS-199

Furthermore, this device complies with FCC radiation exposure limits set forth for uncontrolled

environments.

This module must be installed and operated with minimum distance of 20 cm between the

radiating element and the user.

This module must not be co-located with any other transmitters or antennas.

To comply with FCC regulations limiting both the maximum RF output power and human

exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only

exposure condition must not exceed the values listed in the following table.

To satisfy the FCC’s exterior labeling requirements, the following text must appear on the

exterior of the end product.

Contains transmitter module FCC ID: YZP-BK1110

Contains transmitter module IC: 7414C-BK1110

Changes or modifications to this equipment may cause harmful interference unless the

modifications are expressly approved in the instruction manual. Users may lose the authority

to operate this equipment if an unauthorized change or codification is made.

Note: If this module is intended for use in a portable device, additional testing will be required

to satisfy the RF exposure and SAR requirements of FCC Part 2.1093 and RSS-102.

Band Frequency Range

[MHz]

Maximum Antenna

Gain[dBi]

WCDMA(B5) 826.40~846.6 4.5

WCDMA(B2) 1852.4~1907.6 2.0

LTE(B2) 1850~1910 2.0

LTE(B4) 1710~1755 2.0

LTE(B5) 824~849 4.5

LTE(B7) 2500~2690 2.0

LTE(B12/17) 704~716 4.5