Datasheet

S P E C I F I C A T I O N
PAGE :
DOCUMENT No :
REG. DATE : 10. 12. 16
MODEL : LEMWS52P80LZ00
REV. DATE : . .
REV.NO : 0.0
(30)-4022
LGIT Confidential and Proprietary
©2009 LGIT. All rights reserved.
15 / 17
PRELIMINARY
10-8. Recommended Circuit Conditions (schematic)
▶ Caution on designing PCB & Circuit
Using more than 2 pcs of 1 LED per a Set. It is strongly recommend to
use separate resistor per each LED. (Pic. 1)
(For example, condition using 2 pcs in 1 PCB, Please do notice that it is needed total 2 ea
of separate resistor, if one resistor is connected to more than 2 pcs of LED (Pic.2), it can
cause serious problem on brightness)
[Pic.1 : Recommended Circuit]
(Separate resistor per each LED)
[Pic.2 : Abnormal Circuit]
(Easy to occur brightness problem)
L
1
RL
1
L
2
RL
2
L
1
RL
L
2
L
1
L
2