User's Manual

사내한

To change purchase information on Tag, perform the following steps :

1. Put remote controller near center of Tag‟s display

2. Press and hold „Registration‟ button on remote controller until green LED off

(about 0.5 seconds)

3. When Tag is successfully received „Registration‟ data from remote controller,

Tag‟s display will be changed to “Connected” for a few minutes.

That means Tag hides purchase image to read Tag‟s IEEE MAC address through

the Barcode scanner

4. In NMS Client, download new purchase image to the Tag in registration status

5. When image downloading is finished successfully,

Tag‟s display will be changed to new purchase image

☜

2. “Registration” Key Function