User Manual PRODUCT NAME : Dual Band 2T2R MIMO Wi-Fi Module MODEL NAME TWFM-L006D : The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D REV.NO : 1.0 PAGE : 1 / 11 Table of Contents No Description Page 1 Features 2 2 Module Photo 2 3 Block Diagram 3 4 Storage Test Conditions 4 5 Operating Test Conditions 4 6 Software Programming 5 7 Pin Description 7 8 Outline Drawing 8 9 Packing Information 9 ©2013 LGIT. All rights reserved.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D REV.NO : 1.0 PAGE : 2 / 11 1. Features TWFM-L006D is the module for IEEE 802.11a/b/g/n wireless LAN. TWFM-L006D is based on MTK RT5572 solution. IEEE 802.11 a/b/g/n Dual Band WLAN infrastructure Size : 40mm x46.5mm x 8.25mm 2.4GHz and 5GHz, internal PA and LNA Two stream spatial multiplexing up to 300Mbps Metal Press Antenna Use on-chip OTP (One-Time Programmable) USB 2.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D PAGE : 3 / 11 3. Block Diagram ANT0 ANT1 DPX DPX LNA LNA PA PA Rec eiver Trans mitter Main Clock (40MHz) 802.11n PHY GPIO USB 2.0 1.5V 5V USB I/F 6Pin Connector ©2013 LGIT. All rights reserved. RT5572 802.11n MAC Security E-Fuse (2K byte) 3.3V DC-DC (1.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D PAGE : 4 / 11 4. Storage Test Conditions Parameter Min Max Unit Storage Temperature -20 +80 ℃ Storage Humidity (@ 40℃) - 90 % Caution : The specifications above the Table define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D REV.NO : 1.0 PAGE : 5 / 11 6. Software Programming 1) Windows Utility Execute the released windows utility installer. (1) Run RaUI.exe < Fig1.1 RaUI icon> (2) RaUI can co-exist with WZC. When coexisting with WZC, RaUI only provides monitoring functions, such as surveying the link status, network status, static counters, advanced features status, WMM status and WPS status. < Fig1.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D REV.NO : 1.0 PAGE : 6 / 11 (4) Button section. - Site survey, Link information, Profile, Advanced, Information, About page. - Help page. < Fig1.4 Button section> (5) When starting RaUI, a small Ralink icon appears in the notifications area of the taskbar, as shown in . < Fig1.5 Ralink icon in system tray> * Please refer to the help page in detail usage manual.
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 7 / 11 7. Pin Description Pin No. Pin Name I/O Pin Description 1 VDD I VDD 5.0V 2 USB_DN I/O USB Communication signal USB_DN 3 USB_DP I/O USB Communication signal USB_DP 4 GND - GND 5 WoWLAN I Wake on Wireless LAN 6 GND - GND < Top View > A 1 6 Note. 1) Recommend a Module install sequence for prevent USB device failure - Supply 5.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D 8. Outline Drawing ©2013 LGIT. All rights reserved. REV.NO : 1.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D 9. Packing Information 9-1. Inner Box Packing ©2013 LGIT. All rights reserved. REV.NO : 1.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D 9-2. Carton Box Packing ©2013 LGIT. All rights reserved. REV.NO : 1.
User Manual REG. DATE : 2013.12.13 REV. DATE : 2013.12.13 MODEL NAME : TWFM-L006D 9-3. Pallet Packing ©2013 LGIT. All rights reserved. REV.NO : 1.
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
Information for OEM Integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. End product labelling The label for end product must include “Contains FCC ID: YZP-TWFML006D”. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.