Use and Care Manual

ManualsBrandsLG STUDIO ManualsAppliances23.5 in. 7.4 cu. ft. Clothes Styler Built-In Steam Clothing Care System

16 OPERATION

OPERATION

Operation Overview

Using the Appliance

Prepare items.

can be damaged by exposure to water.

items on moving hangers and prevent

damage.

Clean the lint filter and change the sheet in

the aroma filter.

lint from last load

for faster and more efficient performance.

Reinstall filter, checking alignment when

closing grille. Do not operate the appliance

without the lint filter in place. If using a

fabric softener sheet in the aroma filter,

change it after every use.

Check the water tanks.

water drain tank if needed. Use clean tap

water in the supply tank for better product

performance and lifespan. Do not use

distilled water or reuse water from the drain

tank.

Load the appliance.

choice. If clothing is not appropriate for the

cycle selected, it may shrink or be seriously

damaged.

friction, and damage to clothing.

Turn on the appliance.

Power button to turn on the

appliance.

Choose a desired cycle.

button repeatedly to toggle through the

selections.

Begin a cycle.

Start/Pause button to

begin a cycle. Pause a cycle at any time by

touching Start/Pause again. If you do not

press the Start/Pause button to resume a

cycle within a certain time, the appliance

turns off automatically and all cycle settings

are lost.

during a cycle. If

steam or hot air escapes, condensation may

collect on the floor or walls, resulting in

damage or mold.

CAUTION

a risk of burns or injury from escaping hot air or

steam.

cabinet during operation. Opening the door

during operation affects performance,

lengthens styling time, and results in water

condensing and collecting on the floor.

End of cycle.

Leave the door open to let hot air escape.

The interior light shuts off after 1.5 minutes

if the door is left open.

Preparing Loads

Checking Fabric Care Labels

Most articles of clothing feature fabric care labels

that include instructions for proper care. Below are

some of the symbols that are relevant to choosing

appropriate items for the appliance.

Symbols on Care Labels

Label Meaning Check

Hand Wash OK

Machine Wash, Normal cycle OK

Perm press/wrinkle resistant OK

Gentle/delicate OK

Summary of content (21 pages)

PAGE 1
6 OPERATION OPERATION Operation Overview 7 Start/Pause button to begin a cycle. Pause a cycle at any time by touching Start/Pause again. If you do not press the Start/Pause button to resume a cycle within a certain time, the appliance turns off automatically and all cycle settings are lost. Using the Appliance 1 Prepare items. can be damaged by exposure to water. during a cycle. If steam or hot air escapes, condensation may collect on the floor or walls, resulting in damage or mold.
PAGE 2
OPERATION 17 Label Meaning Check OK Normal OK Permanent press/wrinkle resistant OK Gentle/delicate OK Do not tumble dry OK Do not dry NO Line/hang dry OK Drip dry OK Dry flat OK High OK Medium OK Low OK No heat/air dry NO such as fur and leather, can be used with the appliance. separate load. Odors can be transferred between items during cycles. curely fastened, with zippers and buttons closed, so that it does not fall off the moving hanger during the cycle. dry.
PAGE 3
18 OPERATION Checking the Aroma Filter Use a dryer fabric softener sheet to add a refreshing aroma to items. Replace the fabric softener sheet after every use. 1 2 Remove the aroma filter from the appliance. Checking the Water Tanks Check the water in the water tanks before use. The water supply tank must be filled with water before using the appliance. The appliance does not work without water. The water drain tank should be emptied before each use.
PAGE 4
OPERATION 19 Loading the Appliance could ignite, causing a fire. Remove them from pockets to avoid fire, explosion, or death. Hang clothes on the moving hanger using the hangers provided with the appliance, or use any plastic or metal hanger that hooks snugly into the indentations in the moving hanger. oil, gasoline, or other flammable substances. Failure to obey this warning can result in fire, explosion, or death.
PAGE 5
20 OPERATION Using the Moving Hanger 1 zipper, fasten it with a cotton string around the collar area. Insert hangers into slots and pull down to secure the hook snugly. prevent noise, vibration, or damage to items during operation. NOTE better the styling performance. Items that touch the sides of the cabinet may pick up condensation from the cabinet and fail to style completely. 3 Place the hangers into the slots of the moving hanger.
PAGE 6
OPERATION 21 The Pants Crease Care CAUTION Hanging Pants On the Pants Hanger 1 2 3 of the Pants Crease Care. The appliance may tip, resulting in damage or injury. Remove all objects from pants pockets and button the back pockets. play with or hang onto the door of the Pants Crease Care. The appliance may tip, resulting in damage or injury. Fold pants along crease lines (or where crease lines would be), and attach the pants hanger at the ends of the pants legs.
PAGE 7
22 OPERATION Pants Crease Care. If pants are too large, use the moving hanger. 3 Swing the panels so they're between the pant legs. 4 Make sure the pants are hanging straight. e legs to make sure they are lined up. Fix the pants with 2 clips before closing the Pants Crease Care. If the pants legs are not aligned properly or the pants are not hanging straight, double lines pants may be wrinkled. 5 Close the Pants Crease Care, and then straighten the pants once more. out any wrinkles.
PAGE 8
OPERATION 23 nce, do not stack items on the shelf. Style single items or place items side by side with space between. 1 Insert the hangers between the rails of the shelf. 2 When styling long clothes, if the shelf is stored on the shelf holder, store the hangers outside the appliance during operation. 3 Do not use the shelf to store heavy items. the sides or rear of the cabinet, if possible.
PAGE 9
24 OPERATION Control Panel The control panel responds to touch using static electricity. A light touch is enough to operate it. Use a cloth when cleaning the controls to avoid contacting and activating the buttons. Foreign substances on the control, wearing gloves, or touching the buttons through cloth may prevent the buttons from activating. Control Panel Features Depending on the model, some of the following functions may not be available.
PAGE 10
OPERATION 25 f Refresh Cycle Touch this button to select a Refresh cycle. Touch the button repeatedly to toggle through the selections. - With the LG ThinQ app, you can use a smartphone to control your appliance remotely. - In order to use the Remote Start function, refer to SMART FUNCTIONS. g Special Care Cycle Touch this button to select a Special Care cycle. Touch the button repeatedly to toggle through the selections.
PAGE 11
26 OPERATION Cycle Table The cycles are designed to fit a variety of situations. Select the cycle and setting that best match the load contents and desired results for maximum performance and fabric care. Styling Cycle Guide Cycle Refresh Setting Heavy / Normal / Light Refreshes clothes with high temperature steam and vibration. The cycle helps reduce odors in clothes.
PAGE 12
OPERATION 27 Cycle Setting Gentle Dry Rain/Snow: Use this setting to dry damp clothes. Dehumidify: Use this setting to dehumidify the room where the appliance is installed. Use while door is open 45º. If door is closed, the setting does not operate. Note NOTE clothes. Fabric Care Guide in this manual and fabric care labels on garment before styling. by extended storage may be difficult to reduce. Wrinkles in cotton or linen may not be reduced completely. Iron after styling, if desired.
PAGE 13
28 OPERATION Cycle Setting Styling Process Preparing Refreshing Normal Gentle Dry Drying Sanitizing # Rain/Snow # # # Dehumidify # NOTE Sanitary cycle is changed to Refresh or Gentle Dry cycle during operation, the sanitizing process will be discontinued.
PAGE 14
OPERATION 29 Fabric & Clothes Cycle Sanitary Gentle Dry Polyurethane (less than 5%) Stretchable clothing # # # Rayon Suit Lining # # # in garments before use. NOTE variety. It is difficult to cover them adequately in this manual. Before using the appliance with any item, check the care label before proceeding. t, are heat-sensitive, or are not suitable for washing with water in the Refresh or Sanitary cycles.
PAGE 15
30 OPERATION Options and Extra Functions to prevent condensation, keeping items warm and dry until they are removed. Control Lock 1 Use this function to prevent unwanted use of the appliance or to keep cycle settings from being changed while the appliance is operating. Place clothes into the appliance. 2 Choose a cycle and setting. 1 Touch and hold the Special Care button for 3 seconds to activate or deactivate the control lock function.
PAGE 16
SMART FUNCTIONS 31 SMART FUNCTIONS The LG ThinQ application allows you to communicate with the appliance using a smartphone. LG ThinQ Application Features Communicate with the appliance from a smartphone using the convenient smart features. for product improvement purposes without notice to users. Before Using LG ThinQ Application 1 Check the distance between the appliance and the wireless router (Wi-Fi network). Energy Monitoring power consumption is affected by selected cycles and options.
PAGE 17
32 SMART FUNCTIONS NOTE may be interrupted because of the home network environment. problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again. disable the firewall or add an exception to it. combination of English letters and numbers. (Do not use special characters.) depending on the mobile operating system (OS) and the manufacturer. of the router is set to WEP, network setup may fail.
PAGE 18
SMART FUNCTIONS 33 the receiving antenna. and the receiver. circuit different from that to which the receiver is connected. technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 19
34 SMART FUNCTIONS ect to change without prior notice and may have a different form depending on where you are located. Using LG ThinQ to Diagnose Issues If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
PAGE 20
MAINTENANCE 35 MAINTENANCE can cause serious injury, fire, electrical shock, or death. ents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Interior and Exterior Proper care of your appliance can extend its life. 1 Clean the inside and outside of the appliance with a damp cloth. Cleaning the Aroma Filter For best results, wash the aroma filter using hot water and dish soap.
PAGE 21
36 MAINTENANCE 3 Make sure the drainage nozzle a connected to the water drain tank and the water supply hole b connected to the water supply tank are not clogged. 4 Allow the outsides of the tanks to dry completely before reinstalling the tanks.