OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. This product is primarily designed for the display and reception of audio-visual signals. 10SM3TB www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
ENGLISH TABLE OF CONTENTS 3 SAFETY PRECAUTIONS 3 Precautions When Installing the Product Precautions to the AC Adapter and Power Precautions When Moving the Product Precautions When Using the Product Precautions When Cleaning the Product Precautions When Experiencing Image Sticking 6 8 9 11 12 13 ASSEMBLY AND PREPARATION 14 14 15 15 Parts and Buttons Installing in Portrait Position Installing the Wall Mount Plate Installing on the Wall 17 CONNECT A USB/MICRO SD STORAGE DEVICE 19 Supported Mu
The following precautions exist to prevent accidental damage or personal injury by helping users to handle the product safely and correctly. Precautions are given in two forms, i.e. ‘WARNING’ and ‘CAUTION’, as explained below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product. Prohibited : This symbol describes behaviors or actions which are not permitted.
ENGLISH Keep the anti-moisture material or vinyl film used for packaging the product out of reach of children. • If swallowed by mistake, force it to be vomited and visit the nearest hospital. Do not use the product in a damp place such as a bathroom where it is likely to get wet. • This may create a fire hazard or result in electric shock or malfunction. Do not insert pieces of metal, such as coins, hairpins and metal debris, or flammable materials, such as paper or matches, into the product.
Ensure that the product is installed a certain distance (at least 100 mm) away from the wall for good ventilation. • Failure to do so may result in the deformation of the product or a fire due to the increase in the internal temperature. When placing the product on a table or shelf, be careful not to put it near the edge. • The product may fall, causing personal injury or damage to the product. Make sure you use a TV cabinet or stand that fits the TV. Keep the product away from direct sunlight.
ENGLISH • Do not install the product in an area with poor ventilation (e.g.on a bookshelf or in a closet) or outside, and avoid placing on cushions or carpets. • In addition, do not install it in close proximity to hot objects, such as lights. If you install the product in a place that does not meet the general conditions, this may cause serious damage to the product’s picture quality, life cycle and appearance. Please check with our service engineer before installing in such a place.
Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. • The use of non-approved products may cause a fire or electric shock. Use the product at the rated voltage only. • Failure to do so may result in damage to the product or electric shock. Do not use a multi-tap outlet shared with many devices. Use a dedicated multi-tap outlet with a ground terminal. • Otherwise, this may result in fire due to excessive heat.
ENGLISH CAUTION Failure to observe these instructions may result in minor injury or damage to the product. Do not remove the power cord when the product is in use. • Otherwise, the product may be damaged due to the sudden loss of power. Precautions When Moving the Product WARNING Failure to observe these instructions may result in serious injury or death. Before moving the product, disconnect the power cord and all other cables connected. • Otherwise, this may cause a fire or electric shock.
WARNING Failure to observe these instructions may result in serious injury or death. Do not disassemble, repair or modify the product by yourself. • Otherwise, this may cause a fire or electric shock. If the product needs to be checked, reset or repaired, contact the service center. Do not allow water to get into the product and do not let the product get wet. • Failure to do so may result in fire, electric shock, malfunction or deformation.
ENGLISH CAUTION Failure to observe these instructions may result in minor injury or damage to the product. Do not use or store the product near inflammables. • This may result in fire or explosion. Take a break to protect your health and vision when using the product for a long period. Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. • Damage incurred as a result of this is not covered by the product warranty.
WARNING Failure to observe these instructions may result in serious injury or death. Do not spray water directly onto the product and do not use inflammable materials such as thinner or benzene to wipe the product. • This may create a fire hazard or result in electric shock. Contact the sales representative or service center for internal cleaning of the product approximately once a year. • If you do not clean the product, dust will accumulate inside and may create a fire hazard or malfunction.
ENGLISH Precautions When Experiencing Image Sticking • Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. • Most third-party products have the same issue. Damage resulting from long-term static images is not covered by product warranty.
CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE • The warranty will not cover any damages caused by using the product in an excessively dusty environment.
ENGLISH Parts and Buttons Installing in Portrait Position • The image may differ depending on the model. • The Device can be installed in portrait position. Using the Kensington lock Screen Buttons • • (This feature is available only on certain models.) The Kensington security system connector is located on the back of the Device. For more information on installation and usage, refer to the Kensington lock owner's manual or visit the website: http://www.kensington.com.
Installing on the Wall This Device meets the specifications for the wall mount plate or other compatible devices. Install the Device at least 100 mm away from the wall on each side of the Device to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.
• Wall Mount (A x B) ENGLISH CAUTION A B NOTE • Use the screws specified by VESA standards. • The wall mount kit includes the installation guide and all necessary parts. • The wall mounting bracket is optional. • The length of the screw may differ for each wall mounting bracket. Be sure to use the proper length. • For more information, please refer to the user manual for the wall mounting bracket. • Unplug the power cord before moving or installing the Device to avoid electric shock.
Connect a USB storage device, such as a USB flash memory, Micro SD storage device, to the display device to use multimedia features. CAUTION • Do not turn the Device off or remove the USB storage device when the multimedia screen is activated. This may cause the loss of a file or damage to a USB storage device. • Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty.
Tips for Using USB/Micro SD Storage Devices ENGLISH • • • • • • • • • • • • • • • • • • • • • • Only USB storage devices are recognized. The USB may not work properly when it is connected through a USB hub. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device.
CAUTION • Some files may not be played if there is no supporting codec. Supported Video Codecs • H.263, H.
ENGLISH TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? The screen will not turn on. Action • Check if the power cord is correctly plugged into the power outlet. • Press and hold the power button for more than a second. Image sticking occurs on the product. Problem Action Image sticking occurs when the product • If you display a fixed image for a long time, the pixels may be is turned off. damaged quickly. Use the screen saver function.
The operation does not work normally. Touch does not work at all. The Device will not turn on. Photo/video or multimedia content is not played. Action • Has the Timer been set? • Check the power control settings. Power supply is interrupted. • This may happen when using an uncertified AC adapter. Make sure you use the adapter provided at the time of purchasing the product. • Try turning the power on after disconnecting the AC adapter and cleaning the contacting port.
2 Change the image at the same time interval. ENGLISH CAUTION • Displaying a still image for a long time may cause damage to the screen, resulting in a ghost image. Damage incurred as a result of this is not covered by the product warranty. • Image sticking does not occur when displaying constantly changing images but may occur when displaying a fixed image for an extended period of time.
ENGLISH PRODUCT SPECIFICATIONS Specifications are subject to change without notice. LCD screen Input/output ports Environmental Conditions Screen Type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen 1280 x 800 @ 60 Hz LAN/PoE (802.3at Type 1), DC-IN (Adaptor 19 V MicroSD Operating Temperature 0 °C to 40 °C Operating Humidity 10 % to 80 % Storage Temperature -20 °C to 60 °C Storage Humidity 5 % to 85 % refers to alternating current (AC), and refers to direct current (DC).
ENGLISH 10SM3TB LCD screen Pixel pitch 0.1695 mm (H) x 0.1695 mm (V) Power Power consumption Dimensions (Width x Height x Depth) / Weight Head On Mode: 10 W (Typ.) Off Mode: ≤ 1.0 W 245.6 mm x 164.2 mm x 29.7 mm / 0.
Wireless LAN (IEEE 802.11a/b/g/n) Frequency range (MHz) Output power (Max.) 2400 to 2483.5 16 dBm 5150 to 5250 16 dBm 5725 to 5850 (Not for EU) 11.5 dBm Bluetooth Frequency range (MHz) Output power (Max.) 2400 to 2483.5 10 dBm • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
The product label contains necessary information for after-service. Model Serial No. Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. Please note that a momentary noise during power on/off is not abnormal and does not mean a device malfunction.