Colour Television OWNER’S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents Installation.........................................................2 Connection of external equipment..................3 Location and function of controls...................4 Basic operation.................................................7 On screen menus..............................................7 Setting up TV stations......................................8 Picture adjustment..........................................11 Sound adjustment...........................................
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on the programme number 0 using the ‘Manual programme tuning’ section. 4. Select the programme number where the VCR channel is stored. 5.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control handset, please install the batteries. See the next page. POWER MUTE 1. POWER switches the set on from standby or off to standby. 1 1 2 3 4 5 6 7 8 9 MENU 0 TV/AV 2 3 4 5 EYE/ PR VOL I / II / ( ) VOL OK PR ( ) Q.
Location and function of controls 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set on from standby. 12. I/II/ (option) selects the language during dual language broadcast. (option) selects the sound output. * 13. LIST displays the programme table. 14. SLEEP sets the sleep timer. 15. SSM/ (Sound Status Memory) (option) recalls your preferred sound setting. * POWER MUTE 10 1 2 3 4 5 6 7 8 9 MENU 0 TV/AV º/ ) (option) 16.
Location and function of controls Front panel Shown is a simplified representation of front or side panel. Here shown may be somewhat different from your set.
Basic operation On and off Quick view 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off. Press the Q.VIEW button to view the previous programme you were watching.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations can be stored. Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1.
Setting up TV stations Assigning a station name 1. Repeat the ‘Manual programme tuning’ steps 1 to 3. 2. Press the D / E button to select Name. 3. Press the G button on the Name pull-down menu. 4. Press the D button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the E button you can select in the opposite direction. 5. Select the position by pressing the F / G button and then take your choice of the second character, and so on. 6. Press the OK button. 7.
Setting up TV stations This function lets you select your favourite programmes directly. gramming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. 1. Press the MENU button to select the Station menu. 2. Press the G button and then D / E button to select Favourite. 3. Press the G button to display the Favourite menu.
Picture adjustment Note: Picture menu options are not available for RGB input source. PSM (Picture Status Memory) 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button to select PSM. 3. Press the G button and then D / E button to select a picture setting on the PSM pull-down menu. PSM { PSM TurboOPic.{ CSM { Contrast { Brightness{ Colour { Sharpness { option can perform this function.
Sound adjustment (option) Sound adjustment is an optional function only a set with sound adjustment can perform this function. SSM (Sound Status Memory) You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer. 1. Press the MENU button and then D / E button to select the Sound menu. 2. Press the G button to select SSM. 3. Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound adjustment (option) Stereo/Dual reception (option) DUAL I sends the primary broadcast language to When a programme is selected, the sound information for the station appears after the programme number and station name disappear. DUAL II sends the secondary broadcast lan- Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/ button twice.
Other functions TV and AV modes Inputs can be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the ‘Connection of external equipment’ section. 1. Press the MENU button and then D / E button to select the Special menu. 2. Press the G button and then D / E button to select Input. 3.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj